Quote:
Originally Posted by TEDY
seem u have the same newer batch like me... mine is CBBID 0503EPJW
n only stable at 270x9=2.43 on 1.64vcore... i guess not much of this newer batch can run at high clock...
Printable View
Quote:
Originally Posted by TEDY
seem u have the same newer batch like me... mine is CBBID 0503EPJW
n only stable at 270x9=2.43 on 1.64vcore... i guess not much of this newer batch can run at high clock...
Quote:
Originally Posted by boblemagnifique
nice result!
have you some a64tweaker settings?
results are above ;)Quote:
Originally Posted by boblemagnifique
CBBID 0447 xxxx (cant remember the end :p: )
prime95 stable 2664@1.568v even stable 2565@1.47v but not chance to go further. atm stock cooling so i really cant complain.
http://homepage.ntlworld.com/katmandu666/538.JPG
Winnie 3200+ Cbbhd 0447 TPDW
DFI NF4 Ultra-D
2*256 G-SKILL TCCD 2.5-3-3-6 1T 3v /166
Box AMD
3d01
http://service.futuremark.com/compare?2k1=8466388
cpu-z
http://valid.x86-secret.com/show_oc?id=5711
Bench Stable.
http://members.cox.net/billz1rtc/9x3...een%20shot.JPG
Not Bench Stable yet.
http://members.cox.net/billz1rtc/9x323%20cpuz.JPG
:D
@vlad
probablay you get 2,91ghz benchstable with 1,65v vcore??
A64 Tweaker :Quote:
Originally Posted by Mrki
2/7/12/2/2/5/2/2/1/2/166 7.8us/16x/128/D/D/7/12/8/64/E/150
your settings are famous here :rocker:Quote:
Originally Posted by boblemagnifique
have anyone encounter the clockgen for nf3 didnt working for their setup?
i've tested on my setup that with clock gen the clock didnt even wanna reach 2.4
I had 4*256 of the same stepping, I have to keep 2 the best but good coef 7 does not help badly as I think, coeff 9/10 I arrive has bencher has 284/285mhz, it is necessary as I test well that :)Quote:
Originally Posted by TEDY
Quote:
Originally Posted by boblemagnifique
thx man :toast:
I think so to but ill have to flash to a diffrent bios v1.4 only goes to 1.7v and winnie's undervolt .1v. Anyone know how high the vcore in v1.5X goes?Quote:
Originally Posted by FX Freak
Hey guys, new to XS and excited to be on board. Way back when I was part of Hardware Central and then Overclockers Network (OCN).
I have in my hot little hands a retail A64 3000+ with an odd stepping....
CBBHD 0444MPM
4448974A52016
Ermmm why only 3 letters instead of 4? I understand it's made in 04 and in the 44th week, I wanted a 0448SPAW but I had to settle for what they had. Anyone have any idea what I should expect out of it?
This is going in a
DFI NF4 S939 Ultra-D
Thermalright XP-90 w/ Thermaltake 90MM Smartfan
1GB PNY PC4000 DDR - with LED BLiNG! ;)
XFX GeForce 6600 GT PCI-E 128MB
ATI TV Wonder Pro
2x 120GB WD SATA SE w/ 8MB in RAID0
NEC 3620 DL DVD Recorder
Soyo BayOne
SurePower 400 Watt PSU
Antec SuperLAN Boy w/ 3x 120MM Thermaltake ThunderBlades
Also I have a PCI Sound Blaster Audigy (1). Should I depend on the Karajan or pop the SB card in there?
:welcome: The CBBHD's seem to be doing alot better the most,:idea: Fire that puppy up and let us know. Good luck. :welcome:
are the clocks in this thread prime stable?
Thanks!Quote:
Originally Posted by vlad
That's what I'm counting on. I had to jump through some serious hoops to return a CBBID 0504EHEW for the 0444.
I am DYING to fire it up but my RAM, VIDEO CARD and HSF are all in the mail as we speak.
Some are some aren't. Some are Max Bench Stable and some are just Max Screen shot stable. ;)Quote:
Originally Posted by stealth17
those are very nice overclocks guys..i wish i could get a better stepping but i guess im happy what i have since people have problems with the newer chips..i'll post pics of my bench...later
with a 3000+ 0448SPMW and vapochill PE modded + BH-5
with a 3000+ 0448SPMW and vapochill PE modded
http://membres.lycos.fr/cpulloverclo...ue/cpumark.gif
http://membres.lycos.fr/cpulloverclo...e/cpumark..gif
http://membres.lycos.fr/cpulloverclo...ique/10m...gif
http://membres.lycos.fr/cpulloverclo...ue/sandra..gif
1T timing and I lost the mouse/keyboard, bug inside, I think 3400MHz would have been possible
nicely done there.....here is my minor clock :)
http://img150.exs.cx/img150/3963/330test3cf.jpg
bad compression :( but nice score
cpu stepping: CBBHD 0449MPM
Max Screen:
http://upload.moops.tk/./userfiles/J...enies/2600.JPG
24/7 completly stable, BH-6 ram running 260mhz benches at 7.4gb/s bandwidth
http://upload.moops.tk/userfiles/Jor.../247stable.JPG
omg 1.85vcore :D how hot is there ? :P
didnt even check with load...its on wc though...sooo its not too bad.Quote:
Originally Posted by TEDY
1.85v isnt 24/7 though
So my first post.Sold my buggy 0451 3200+ winch and got 0504 CBBID 3200+ and a huge difference.Max Prime stable now 2,63ghz(1,6v) vs 2,42ghz(1,6v) with 0451.Please dont call the cpu-"winny or winnie" as its sounds like "my darling windows".I will fill my details and profile later.
CBBID doing 263*10 at 1.6v ? wow now that's something new.
Was you previous 0451 CBBHD soodent ?
Welcome to XS.
CBBID 0503 with +10°C water
(and it's Finnish superpi) ;)
CBBID doing 263*10 at 1.6v ? wow now that's something new.
Was you previous 0451 CBBHD soodent ?
Welcome to XS.[/QUOTE]This 0451 stepping is unknown(sold the protsessor).
oh yeah forgot to note mine is a 0447 tpfw does 2700MHZ 1.5vcore max....but current the screenshot is my 24/7 2640mhz 1.44vcore 330x8 1:1
3200+ winchester CBBID 0504 (forgot full stepping and im too lazy to take the hs off again :/)
10*260 @ 1.68v prime95 stable on quiet aircooling (XP-120 + panaflo L1A)
able to run through SuperPI 1M at 2.7ghz @ 1.725v :toast: , although its far from prime stable at that.
not the best CPU ever but hey, its not too bad for a CBBID :cool:
CBBHD 0449 MPM 3200+ Winchester
2500 mhz @ 1.4v (using 5/6 divider) - totally stable (p95, benches, games)
2600 mhz @ 1.55v (using 5/6 divider) - totally stable (p95, benches, games)
anything above 2600 seems to want 1.6v or more - using stock hsf so that is not an option b/c the heat output is cranking at 1.6v and up with stock hsf. (Loads approaching 60+ deg C).
Very small real world performance difference between 2500 & 2600, so 2500 @ 1.4v is my 24/7 overclock. Very cool running chip.
Hi getting the new DFI N4D310p Bios has allowed me to run 9x300 1 to 1 where before I was at 10x270 .... 1.55V for the chip 2.7V Ram
3200+ water cooling +10c + DFI Ultra-D/sli + KHX3500/256MB 3.6v
http://koti.mbnet.fi/macoo/duronbird...447_3200_3.JPG
http://koti.mbnet.fi/macoo/duronbird...fast18.31s.JPG
http://forum.pcekspert.com/attachmen...&postid=201074
(cpu-z screenshot)
this is my 3500 Winie with box cooler...
Here are my 24/7 settings, btw straight from boot :cool:
24/7
3200+ winchester, cooled with Hyper6 and prime stable.
CBBID 0503EPCW
prime 20 min only?, go and up those ocz plat rev 2 :D it can do 280 2,5-3-3-5
It was just for the screenshot. I've had it priming for 24 hours stable.Quote:
Originally Posted by xavicl
- Winchester 3000+ 0437VPMW w/o IHS
- Zalman CNPS7000A-AlCu
- DFI Lanparty UT NF4 Ultra-D
- 2*512mb TCCD
[link]
new mobo, same old Winchester. with IHS it needed 1.4V to reach 2400mhz even on watercooling. oh, and DFI = teh ownage
Hi,
Anyone else running there memory at 300mhz 1 to 1 in dual channel?
I have 2 Wincesters that wiill do over 300mhz 1:1. This is on the DFI NF4 board. One of them quit at 270 on the MSI Neo2, it's an 0441 and the other is an 0503 that has never seen the MSI (thank god).Quote:
Originally Posted by BigBen
Quote:
Originally Posted by BigBen
nice! what memory is that?
It was in my sig lol 1GB Adata PC4800 :) .... I did have it at 305 but windows crashed after a minute or so but I think its more to do with chip than the memoryQuote:
Originally Posted by stealth17
Regards
Info in my sig. I am going to be getting a OCZ Powerstream 520W to replace my POS Aspire 500W. So its possible I will be able to get around 2.7GHZ stable.
I do 300x9, but 1.66V :( And can do 305x9 but unstable. Look signature
Im running at 9x319htt 1:1 in Dual channel But this is with 256mb dimm's. :)Quote:
Originally Posted by BigBen
just got my system a few days ago and have so far pushed my 3200+ to 2.6Ghz @ 1.6v using an XP-90.
just curious though...is 1.6v a safe "everyday" or "24x7" voltage to run the chip on??? I don't want to fry it as I plan on keeping this setup for a while. If it's not a recommended daily voltage, I'll drop it back to 1.52 where I can still hit 2.5Ghz.
thx
oh...stepping info for curiosity:
CBBID 0503EPHW
Why yes ...yes i am.Quote:
Originally Posted by BigBen
nice sticks, could you post a screenie where your A64tweaker settings are on?Quote:
Originally Posted by ccokeman
Hi guys, What do you think about this Winnie? :D
This is with stock Heatsink.
http://img.photobucket.com/albums/v6...s/bbde4496.gif
http://img.photobucket.com/albums/v6...s/0e7bf5cf.png
The test continues, but i'm waiting for migrate to better cooling solution.
Model: 3000+ Winchester
Core: 0.09
Date: 0444
Stepping: CBBHD
Code: VPEW
Mhz: 2900Mhz
Gain: 1100 Mhz Gain
Vcore: 1.525v
FSBxMulti: 9 x 323, memory running 1:1 with 2.5-4-3-7 timings (2x 512mb G.Skill)
Cooling: Boxed cooling
Stable: Not very stable, needs 1.6v to be stable, but there's barely any cooling paste on it so that means overheating, been trying to get some as5 ... Perfectly stable though at 9 x 311 with 1.5v
http://img223.exs.cx/img223/9692/2900mhz5tu.jpg
(also does:
2.6ghz with 1.3v
2.4ghz with 1.2v
2.3ghz with 1.1v :cool: )
That's excellent, crank up the voltage and slap a XP-120 sink on that baby and show us 3Ghz on air! :toast:Quote:
Originally Posted by corvus_corax
http://www.xs4all.nl/~famchow/A64_30...rime_boxed.JPG
Ghehehe, boxed cooler
CBBHD 0448 RPMW
Mine 3200+ can do 2500 ghz with default voltage. Waiting to finish the chiller to see better results.
kakaroto ur results is very impressive considering the stock cooling and voltage..
Model: 3000+ Winchester
Core: 0.09
Date: 0444
Stepping: CBBHD
Code: VPEW
Mhz: 2900Mhz
Gain: 1100 Mhz Gain
Vcore: 1.525v
FSBxMulti: 9 x 323, memory running 1:1 with 2.5-4-3-7 timings (2x 512mb G.Skill)
Cooling: "Boxed cooling"
Ojorifiso, "Boxed cooling".Impressive oc potential u got there...a gem...rarely to be found...
Managed to get 2.6GHz @ 1.425Vcore :banana4:
Can also get 2.55GHz @ 1.4Vcore :)
http://host366.com/pics/lowvolts.JPG
here a shot 300x9:
http://www.xtremesystems.org/forums/...id=26730&stc=1
omg sweet stuff man!
Im trying to get my winnie pie sable at 2.7GHz but she just dont wanna do it :( Not even at 1.7vcore... gotta wait till i go water lol
not all CBBID suck! i got another one 504EPMW does 2.75 so far with 1.7v mobo is holding me back so far (got an abit AV8 to play with as well).
updating bios etc before i really push it. much better chip to play with either way :)
my cbbid does 2600mhz 290x9 :D
kakaroto You have a Great Winnie :slobber:
Another pic mine:
http://img.photobucket.com/albums/v6...innieOn270.jpg
sweet volts man! :toast:
nice one corvus_corax!
do the winnies put out less heat than a similar clocked aXP since they are 90nm and require less voltage?
thanks
I get 33 degrees idle on air at 1.5Vcore
New CPU arrived... I like it. :banana:
3200+ 0450, 2,8 GHz @ 1,616 V stable so far. Here a lil' Super PI bench:
http://img128.exs.cx/img128/8306/sup...0283ghz0nw.jpg
:| woah dude thats a sweet winnie! Put that on water or phase change and get her past 3GHz! :D
Alec
CBBID 0502 APAW 3000+
2250 Mhz 9*250 1.3v
2520 Mhz 280*9 1.55v
http://www.2and2.net/Uploads/Images/2520_34s_irfan.jpg
New winnie showed here, cbbid 0502bpew. Will post oc once i get to it... not expecting a whole lot though
Quote:
Originally Posted by W4nK5ta
:slobber: :slobber:
:slobber:
some of these winnies are awesome
I only have my 3000+ at 300 x 9 - 1.52v prime 10hrs on air
Nice CPU. Stepping and week?Quote:
Originally Posted by W4nK5ta
Week 50 of '04. I've forgotten the stepping. :rolleyes: I will tell you next time when I reseat the waterblock. ;)
Don't get me wrong, I love what you guys are doing pushing these Winchesters to see what the processor themselves are capable of. . but you cant seriously tell me you run like this all the time. Do any of you guys use your PC's for gaming? I mean look at those memory timings...
Do you readjust your settings and get tighter memory timings (2-2-2-5 1T) for gaming or do you just run them balls out with the CPU all the time?
I'm currently doing everything with my 3200+ Winchester@245*10 1.55v and my memory on the 166 divider running at 2.4 with 2-2-2-5 and 1T. Solid performnce, plenty of memory bandwidth. I don't see anything wrong with that. I'd rather have the mem. bandwidth when it's time to game and load those maps...but maybe that's just me.
-recover-
Well some of the screenshot's you see are Max bench stable and some may even be suicide screenshot's But some are 24/7 setting's and yes some of us do game at these speed's. :) :welcome:Quote:
Originally Posted by recover
and that is why it's called Xtreme. :hehe:
well, imagine that yes...Quote:
Originally Posted by recover
we do use our PCs 24/7. maybe not always at what they can do at it's maximum but close to it.
My 3200+ Winnie can pass full set of benches on 12C air @ 2.76GHz... For everyday use, it's doing absolutely fine, rock stable, @ 2.67GHz, pushing TCCD clocks @ DDRDDR592 7-3-3-2.5-1T :) Docking (like folding), gaming, priming... whatever you throw at it it passes...
BTW... Welcome to XS and get your rig up to speed :thumbsup: Plenty of advice on how to do it can be found here :)
thanks for the welcome guys. i've been lurking for quite sometime here and over at at ocforums for. .well years actually.
i'd say running 450Mhz over on stock cooling and that lame @ss thermalpad is up to speed enough for now. :cool:Quote:
Originally Posted by bachus_anonym
my previous rig was an Athlon 1700+ DLT3C running at 2.1Ghz with a all copper thermalright the size of a grown mans fist and a 92mm Vantec Tornado....after all the racket that thing made Ive decided to run stock..or...close to stock for a couple months. I'm going to replace the stock cooling, and get new ram soon enough.
thanks again though. i'll stick around as long as you'll have me.
-recover-
What's your name @ Ocforums?Quote:
Originally Posted by recover
I personally don't see the big issue with tight memory timings and games. If you're running your ram at those ballz-to-the-wallz speeds and you have a decent video card...you're not going to notice a damn thing when running 1600x1200 6xaa/16xaf at 127fps with loose timings or 140fps with tight timings...Quote:
Originally Posted by recover
point is...you're already over 100fps...nothing's going to touch you unless you just plain suck...
:p:
2.8ghz on a a64 3500+ :CBBDF 0437 RPAW
cool by water (dd tdx 2*dual procore and gfx is watercool)
cpu.z
awesome, just got my cbbid 0502 in and it wont do 2.2 ghz regardless of the voltage... its just so awesome! Ebay for this bugger i think.
3000+ CBBID 0502 FPMW -> 2.4ghz (300x8) at 1.55v stable (box amd)Quote:
Originally Posted by Super strokey
Anybody get a chance to test any newer CPUs yet? I'm waiting on a motherboard, but I just got two 3000+ 0507 FPAW.
What do you think about voltage in this Winchester 3200+?
Is running on stock at 1.18V, even can go on 1.1V, but...is bad (is secure for memory controlller)), is good?
Its Prime 2004 estable too.
Thanx.
BTW, Ignore temps and Psu rails volts, they are wrong.
What's the stepping?Quote:
Originally Posted by corvus_corax
Winchester 3200+ CBBHD 0444 SPMWQuote:
Originally Posted by Hombre
Here i got a winchester 3200+ CBBHD 0444 SPMW
2.65 ghz at default voltage .
Yep, me too, and with the Heatsink stock. But, have you tried reduce voltage on stock frequencies (200x10) at the minimun stable?. For example, i've used 1.18V, even 1.1V, and it's estable (SuperPI 32M, S&M, Prime 2004) but my question is if what i'm doing is secure, or my MC could die?Quote:
Originally Posted by Marvin
Winchester 3200+ (CBBID 0505EPMW) 2.6Ghz @1.61v with POLO735...
@LANero nice clock for CBBID
Thanks rzonealley...
Apparently this it is the point mas highly that I can reach, but the PI is very bad and even I cannot know that it happens.
http://img146.exs.cx/my.php?loc=img1...e=setpi4pc.jpg
LANero...can you get your CBBID any higher than that with more voltage? Mine will do the same speeds with about the same voltage...but it seems to hit a wall at 2.65Ghz...even with added voltage. 270fsb and it won't even load the OS, it just goes into a reboot cycle right after the cmos backup.
What is a good Winchester overclocker for aircool? 3200+? 3400+ or 3500+?
Thanks,
My CBBID does 2.75 but i get flashing textures at any more than 2.65. Time for Vcore vmod!!
Not with more not with fewer voltage, the sweet point of this seems to be 2.64 for benchs. I am going to try with Water closet to see if it gains something of mhz.
has anyone hit the wall with 1.7vcore only to do vmod and gain mhz at say 1.8v?
I need inspriation to do vmod! :D
I think I've found some sort of pattern with my chip though. It'll do up to 2.4ghz @ 1.42v...after that it seems that I need .1v for every 100mhz increase. To hit 2.5ghz, I need 1.52v...2.6ghz needs 1.62v...and I'm not brave enough to feed it 1.7v to see if it does 2.7ghz :p:
http://koti.mbnet.fi/macoo/duronbird...9.59s_r404.JPG
Winchester 3200+ CBBHD0447 @3G :D cooling r404