awesome score there Quad:toast: , im pretty much tapped out with mine...
Printable View
awesome score there Quad:toast: , im pretty much tapped out with mine...
thanks. that was quick:)
Tom look at : http://www.biwa.ne.jp/~yok/838RANK-NEW.htmQuote:
Originally posted by Tom Holck
Nice CCC
Thats nr 3:toast:
5'03 like u with a P4EE 3.2XE@5054MHz
but his OS is Win2003
why u dont try with this OS? :D
Hi cpulloverclock:toast:Quote:
Originally posted by cpulloverclock
Tom look at : http://www.biwa.ne.jp/~yok/838RANK-NEW.htm
5'03 like u with a P4EE 3.2XE@5054MHz
but his OS is Win2003
why u dont try with this OS? :D
Last week I downloaded 2003server 32 bit and
2003server 64Bit AMD.
yesteday I installed the 2003 32 bit, its work fine. Pre-results:
:rolleyes: might be a bit faster, only tried pifast low(:D) settings 3152 Mhz drop under 40. With XP sp1 and Win2000 it was a bit over 40
The 2003 bit64 don't work for now. It can only be installed from the boot-CD I have made. It make some adress error, when the first screen comes up. It might be some settings in SK8V bios??
There might also be a problem with ATI card driver (64 bit??) I think we have to use nVidia.:rolleyes:
I will go for the 32M with the 2003 son, and work on the 64bit AMD.
Now the 2003server AMD64bit work:
http://www.xtremesystems.org/forums/...723#post329723
Superpi new WR: 24.46:banana:
update 20.01.04 24.21::banana: :banana:
http://www.xtremesystems.org/forums/...229#post332229
Glad u got i working mate :toast: :banana:
this is my best.
Just quick note
Have not forgotten you all ;) just busy i'll get around to doing
an update this evening after i get back from work.
Regards
PMM
Quote:
Originally posted by cpulloverclock
Tom; for u :
Uhhh. I have to hurry, if I'll be the first under 5 sek:p:
Yesteday got 2 new stik og corsair. Its the new version 1.1
Already tried they, can go 2-5-2-2:D
I have also tried 4 x 512 Mb but that is 2-3-6-2
Have to test some more, 4 is more onstable as 2.:rolleyes:
In about 2 weeks, my final Cascade-cooler is finich. It's only the prototype I'm using as this point.
The Final (18.18 PC 115C) can take 15-20% more load and a little better in temp. [2 18 cubik compressors working temp -115C]
It will help in 32M I think, it will bench at 3152-3200 but in M8 win-XP is still faster (3186 Mhz)
The 64 bit can do M8 5.05-5.06 at 3133-3152 Mhz but is not stable beon that.
Now the 3D work in server 2003 32 bit, but it is to slow only 100 in car high. Same settings in win2000 give 162!!
sorry Tom but :(
....
http://v-tec.hp.infoseek.co.jp/3339A...2100V-299S.JPG
awesome :slobber:
http://v-tec.hp.infoseek.co.jp/3339A...-2100V-25S.JPG
here's my first A64 effort
http://users.tpg.com.au/spark69/an50r/pifast45.jpg
still trying to sort out some decent CPU contact with this prom :(
45.02 on P4EE @ 4309... Looks nice for P4, though can't compare with big AMD guys...
http://alt.modlabs.net/45.02.gif
Minor improvement over my last result
http://users.tpg.com.au/spark69/an50r/pifast44.79.jpg
Cpulloverclock:)Quote:
Originally posted by Tom Holck
Here you are, cpulloverclock
1. work done: Cpumark 406 at 3195, havent tried higher, done 400 at bootingspeed 3152
The M1 SuperPi test I now, "only" 27 sek, but VERY close to 26..
I can't beat the M8 sub 5 min at the moment. In 64 bit the Cpu gets to hot, and can't go pas 3151. In XP the speed need to be around 3250. I am not stabil at that speed yeat;)
New ER3500 ram comming soon, and the final Cascade in 14 days.
Then I will move sub 5 min in M8 and sub 24 min in M32.:banana:
But still improving:
wow, ouchhhhhhh 3224MHz :slobber: :toast:Quote:
Originally posted by Tom Holck
Cpulloverclock:)
I can't beat the M8 sub 5 min at the moment. In 64 bit the Cpu gets to hot, and can't go pas 3151. In XP the speed need to be around 3250. I am not stabil at that speed yeat;)
New ER3500 ram comming soon, and the final Cascade in 14 days.
Then I will move sub 5 min in M8 and sub 24 min in M32.:banana:
But still improving:
wait&see in 2 weeks
D@mn, you got a tough life Tom :D Keep up the great work.Quote:
Originally posted by Tom Holck
In 64 bit the Cpu gets to hot, and can't go past 3151.
Got myself a new board, K8NNXP. The SK8N mysteriously ceased functioning :stick:
http://caprid.homestead.com/files/pi47.89air.jpg
Not to bad for a $20 Thermaltake HSF :)
STILL fighting with my OLD CPU........ :D
1:1 is the go......
http://www.adventurevision.com/somep...ast-46.20s.gif
(46.20s)
- A64 3200+@1.8v
- Shuttle AN50R
- Corsair XMS 3502v1.1@3.2v
- stock nVentiv MACH I
- Fortron Source 530w PS
It's running 265x10@2.5-2-2-11. I think it has a little left but I don't want to do anything stupid... yet. ;)
Inched up to 266x10 and almost broke 46...
http://www.adventurevision.com/somep...ast-46.03s.png
I'm pretty happy with this setup. ;)
Respect to the scores above :)
Now I'll show you my "awesome" score :D
http://home.planet.nl/~dikke332/pifast5663.jpg
Abit NF7-S v2.0
Barton 2600+ @ 11.5x220 @ 1.95v(yeah it's locked so what it clocks good) :D
Kingston HyperX PC3500 (Winbond CH5 chips) @ 11-2-2-2 (not very stable but pifast stable) ;)
11-2-3-2 results in 1 second slower pifast :(
P4EE at 255fsb...ok I guess.
And about 1 second off again :)
http://home.planet.nl/~dikke332/pifast5566.jpg
Duron 1400 L2 modded
ASUS A7N8X deluxe vmodded
2x 256mb Twinmos PC3200
http://home.kabelfoon.nl/~vnrswk/pifast1.jpg
holy mother of god! :eek:Quote:
Originally posted by NoStra
Duron 1400 L2 modded
ASUS A7N8X deluxe vmodded
2x 256mb Twinmos PC3200
http://home.kabelfoon.nl/~vnrswk/pifast1.jpg
i'm @ 56.6 ish w/ 245 x 10.5 2-2-2-11 on my Tbred :)
gonna try higher tonight :D
Done an other Vcore mod....now I could get 2.2V. Check this ;)
Watertemp was 9 degrees...NOT -9 ;)
http://home.kabelfoon.nl/~vnrswk/pifast2.jpg
Quite impressive for a Duron, Nostra.:up:
http://www.adventurevision.com/somep...ast-45.84s.png
(45.84s)
My personal goal of sub-46s!!! :banana:
Funny thing is, I had to go from 1.8v to 1.75v to get there. ;) Now all I need is some great memory since I'm pretty sure the CPU has some left in her.
Nice work Jeff.Quote:
Originally posted by Jeff
http://www.adventurevision.com/somep...ast-45.84s.png
(45.84s)
My personal goal of sub-46s!!! :banana:
Funny thing is, I had to go from 1.8v to 1.75v to get there. ;) Now all I need is some great memory since I'm pretty sure the CPU has some left in her.
What are you using for coling at present ?
Regards
Andy
A stock MACHI.
Hi there guys......
It's nice building friend's computers........ :D
I'm building a computer to a friend of mine and I bought for him a 3.4GHz CPU.....Guess what!!!....I couldn't not to put it into my Prommie.........
1:1 CPU(fsb) : RAM....... :D
Nice Hipro5,Quote:
Originally posted by hipro5
Hi there guys......
It's nice building friend's computers........ :D
I'm building a computer to a friend of mine and I bought for him a 3.4GHz CPU.....Guess what!!!....I couldn't not to put it into my Prommie.........
1:1 CPU(fsb) : RAM....... :D
I now you have tried different P4. That means, that the new 3.4 OC better than the old ones?:toast:
I can do pifast at 4753MHz on my old P4@3.2 (erly one)
wonder what a new 3.4 will do in the Cascade:rolleyes:
Btw: I get my final "Cascade R1150 18,18, -115C" and some new CorsairRE 3500 LLPT ram soon. The (my)record will then bee improved:slobber: 38.xx?
Hipro5, next time you building a computer for a friend then do a FX:D
My first sub 50 second.
Shuttle AN50R a64 3400+@ 228x11 stock cooler w/ improved fan
2x256 twinmos BH-5 2,5-2-2-6-12-16
Board is still unmodded. :)
Congrats Zeus... 50 was one of my big goals! :toast:
Thanks man!Quote:
Originally posted by Jeff
Congrats Zeus... 50 was one of my big goals! :toast:
I remember breaking 60sec with a Tbred and NF7, seems like age's ago but it's only a year actually.
;)
Isn't it funny to page through this thread and see how far you've come? I know I do that every once in a while and I'm amazed. :D
Thanks a lot Tom.......I wish you luck with your new stuff..... ;) :toast:
Now......a little bit better..... :D
Thanx m8 ;) I am waiting for colder weather! I need those below zero temps ;)Quote:
Originally posted by toymaker
Quite impressive for a Duron, Nostra.:up:
Some minor improvements:
hi everybody
my new 2.8C M0 (crappy) on my R12 chiller
IS7E / 1.875v
http://membres.lycos.fr/ftpad/images...-pifast-51.png
Some A64 3000+ pwnage :D
A64 3000 @ 3128MHz (312.8x10/260mem) => 41.55
lool sick - really xtreme
:toast:
very nice macci :D
/me will buy a64 ?
My FX-51 goes sub 40 at 3133 (241x13) in 64 bit.Quote:
In 32 bit XP it's sub 40 a 3152 (242.46x13):rolleyes:
Whats mem timings at 260 ?
Yea but your FX has twice the cache and dual channel mem :D
interesting that the 64bit os helps this bench too. I need to give it a go I guess.
mem is at 2-2-2-5-8-16, runs up to 274.5MHz (x11) w/ these timings.
x11??? How??? :confused:
w/ 3400 of course :D
Still improving...
tea bread @ 250fsb dc... a little vcore mod only..
piFast = 51.45 sec.
only @2470MHz
http://www.zone.ee/tomz/data/Pifast_...11@2.85v.jpg?2
It just seems to get bettter and better...
2400-M
Infinity
2x256 Buffalo 3700
IS that still aircooled Zeus ?Quote:
Originally posted by Zeus
It just seems to get bettter and better...
Regards
Andy
Yes, still aircooled with the stock cooler and better 70mm fan (6000rpm) but with my case outside... :DQuote:
Originally posted by zakelwe
IS that still aircooled Zeus ?
Regards
Andy
Nice isn't it?
Certainly is :toast:Quote:
Originally posted by Zeus
Yes, still aircooled with the stock cooler and better 70mm fan (6000rpm) but with my case outside... :D
Nice isn't it?
Is that the lowest air cooled pifast score ????
Regards
Andy
Unfortunately, no it aint. :(Quote:
Originally posted by zakelwe
Certainly is :toast:
Is that the lowest air cooled pifast score ????
Regards
Andy
Another dutch guy, Petervandamned, crancked his 3400+ up till 2770MHz on some outrages aircooling.
Swiftech heatsink with some fanconverter on top with a 120mm delta screaming on top off that! :eek:
No idea how much voltage he was using.
He managed 47.47sec...
Oh well, the grass is always greener on the other side. :)
Can't see him on the table of results :confused:
StormPC has a good result, and although StormPC is a general bollox merchant it looks a figure in the ballpark. However a lot of 3dmaxx people have baggage around them so I wouldn't be surprised if someone else did that for him.
Regards
Andy
a Mobile Barton 2400+ @ 2,881mhz
piFast = 48.61 sec
I get 45.6s in air cooling with my 3.4C at 4200MHz and 43.4 with a vapo at 4521MHzQuote:
Originally posted by zakelwe
Certainly is :toast:
Is that the lowest air cooled pifast score ????
Regards
Andy
That's a fantastic air cooled overclock! :toast:Quote:
Originally posted by cpulloverclock
I get 45.6s in air cooling with my 3.4C at 4200MHz and 43.4 with a vapo at 4521MHz
Are 3.4C's doing a lot better than 3.0C in general now ?
Regards
Andy
yes I thinkQuote:
Originally posted by zakelwe
That's a fantastic air cooled overclock! :toast:
Are 3.4C's doing a lot better than 3.0C in general now ?
Regards
Andy
you will have to bare with me until last SUN / MON.
I'm at a Lan so can't update tables.
Please remember these pifast tables are manually entered
and my time limited but I do tend to get results up as a worst
case at least weekly but normal now is twice a week but no
longer on a daily basis.
Rest Assured as long as you submit your results I have them
stored & ready I also get Email notification of incomming results
to safe guard just incase.
Expect an update Monday evening at lastest.
thx
PMM
PMM, is there a way for us to remove our old scores? Some of us constantly update our benchmarks due to higher overclocks.. Could this be done by emailing it to you which one we want deleted?
otherwise the database may get... overloaded and Boom.... :explode:
My new mobile @ 47.83
http://www.fewture.cistron.nl/2400Mpifast.JPG
Fastest Barton I think :)
2400+ Mobile
DFI Infinity
Twinmos BH-5
Prometeia R507
I do delete updated scores but I don't always spot em all
If you have old results you noticed in the main table, best thing is
just to add to the comments box something along the line of
please remove my xx.xx time.
For info... If the setup differs i.e. diff motherboard then I regard
those as valid and allowable of more than 1 entry same system
results I tend to delete old ones.
But if you want any time removed just add to comments section
on submit form if you see any i've missed.
regards
Paul.
Ok, thanks PMM..
btw, congrats to Fewture's score. :toast:
I'm looking at moving over to a mysql database, but my skills
at creating a php system to cope is limited.
be nice to have an orb style rankings system, but i've never
found any code that I can manipulate or run as is.
David @ Hexus who provides the hosting gave me some
details of the mysql database but I never used it, I'd have
to ask if thats still available to me as its prob not setup
since the changes way back when they were hacked.
Issue is of creating a decent system that can be left to run on
its own with minimal interaction be nice if result went up
right away but then its open to abuse and there are a lot
I just delete from people trying it on allready.
One day hopefully.
P.s. If anyone knows of any php scripts for displaying a rankings table pref sortable on various columns let me know.
thx
Paul.
2.9 with a mobile 2400 nice :)
A better run..
http://www.fewture.cistron.nl/47.45.JPG
47.45s
11 x 264 (2912MHz)
Vcore: 2.06
Vdimm: 3.65V
Vdd: 2.00V
61% overclock :p
:banana:
Geeez, Fewture!
That's some score mate! :banana:
I knew you would go sub 49, but never thought you would this man!
Congrats! :toast:
Looks like the prom is in the right hands now mate!
Keep pushing! ;)
Tnx m8 :toast:Quote:
Originally posted by Zeus
Geeez, Fewture!
That's some score mate! :banana:
I knew you would go sub 49, but never thought you would this man!
Congrats! :toast:
Looks like the prom is in the right hands now mate!
Keep pushing! ;)
update done :)
I have a better score than the one on hexus now :)Quote:
Originally posted by PMM
update done :)
http://www.fewture.cistron.nl/47.45.JPG
hi
new cooling :D
is7-e vddr/vtt/vdd modded 2.8c m0
http://learn.chez.tiscali.fr/pifast-sub-50-2-8CM0.png
u can do betterQuote:
Originally posted by Learn
hi
new cooling :D
is7-e vddr/vtt/vdd modded 2.8c m0
http://learn.chez.tiscali.fr/pifast-sub-50-2-8CM0.png
;)
nice bug of cpu-z
287 1:1... u r in asynch mode
with a better mobo, probably.......yesQuote:
Originally posted by cpulloverclock
u can do better
;)
nice bug of cpu-z
287 1:1... u r in asynch mode
it's a clockgen and cpuz bug, with the n/b strap @ 667
53.09 on my locked barton.
ill up the shot later. i have only 53.31 shot at the sec
http://www.zone.ee/tomz/data/rekordid/pifast.jpg?2
:)
Shido, :p:
Here's my newest one........Pentium4 3.4GHz at 1:1 CPU(fsb) : RAM....RAM= 2 x 256MB Kingston Value Ram PC2700(DDR333)(BH-6 chips onboard) at 269.4MHz(539MHz DDR) with Cas 2-5-2-2 Streat Racer - Enhanced - 4 - Enable - Enable ,on an ABIT IC7 Mobo...
Still climbimg the charts...
It took me a Vmod to do it. :)
A small update:D
At 262 mhz with Cas 2-5-2-2 Streat Racer - Enhanced - 4 - Enable - Enable ,on an ABIT IC7 Mobo...3.2c and promie r404.
Root i am coming for you...few days left to have 3.4:D :D
Nice Job man:toast:
Nice Hipro5Quote:
Originally posted by hipro5
Here's my newest one........Pentium4 3.4GHz at 1:1 CPU(fsb) : RAM....RAM= 2 x 256MB Kingston Value Ram PC2700(DDR333)(BH-6 chips onboard) at 269.4MHz(539MHz DDR) with Cas 2-5-2-2 Streat Racer - Enhanced - 4 - Enable - Enable ,on an ABIT IC7 Mobo...
The best I ever did on the IC7 was 43.13 and that was more than 100 Mhz higher:rolleyes:
You'r close to Maccis "Nitrogen limit" at 42.78
What is your Ram-Volt at that speed.:toast:
BtW:
Now I have been on top of the Pifast for 3 month:D
Tom....... 16.12.02 til 6.1.03 ca 4 weeks
JCViggen....... 6.1 til 8.3 ca 9 weeks
Capid.......... 8.3 til 24.4 ca 7 weeks
JCviggen......... 24.4 til 7.5 ca 2 weeks
Macci.......... 7.5 til 31.5 ca 3 weeks
Tom......... 31.5 til 10.6 ca 1 weeks
Hipro5............ 10.6 til 12.7 ca 5 weeks
Tom........... 12.7 til 10.9 ca 9 weeks
Macci........... 10.9 til 16.10 ca 5 weeks
JCViggen............ 16.10 til 6.12 ca 7 weeks
Tom.......... 6.12 til ?? WR 3 month
Hey Tom
Amazing time you've held that record so far, when does youre new cascade arrive?
Thx
Stefan
in week 13 M8:toast:Quote:
Originally posted by Pejsen
Hey Tom
Amazing time you've held that record so far, when does youre new cascade arrive?
Thx
Stefan
Change to AMD64:eek: !!
Vmods, don't you just love em?
omg.. my Mobile is right up there with P4EE's and A64 3400+ :D 27th place now.. Not bad for 80 euro chip and 100 euro board. :P
What about your €800,- cooling? :DQuote:
Originally posted by Fewture
omg.. my Mobile is right up there with P4EE's and A64 3400+ :D 27th place now.. Not bad for 80 euro chip and 100 euro board. :P
lol zeus
here a another try with my 3000+
http://kakaroto.ntonline.nl/A64_3000/Pifast_2.62GHz.PNG
With water.... This CPU has little problems with 2600MHz....not a good cpu or the cooling?
great CPU indeed.. Cooling is the problem in your case but nice water job anyway :)
Thanks Tom my friend....... :toast:Quote:
Originally posted by Tom Holck
Nice Hipro5
The best I ever did on the IC7 was 43.13 and that was more than 100 Mhz higher:rolleyes:
You'r close to Maccis "Nitrogen limit" at 42.78
What is your Ram-Volt at that speed.:toast:
BtW:
Now I have been on top of the Pifast for 3 month:D
Tom....... 16.12.02 til 6.1.03 ca 4 weeks
JCViggen....... 6.1 til 8.3 ca 9 weeks
Capid.......... 8.3 til 24.4 ca 7 weeks
JCviggen......... 24.4 til 7.5 ca 2 weeks
Macci.......... 7.5 til 31.5 ca 3 weeks
Tom......... 31.5 til 10.6 ca 1 weeks
Hipro5............ 10.6 til 12.7 ca 5 weeks
Tom........... 12.7 til 10.9 ca 9 weeks
Macci........... 10.9 til 16.10 ca 5 weeks
JCViggen............ 16.10 til 6.12 ca 7 weeks
Tom.......... 6.12 til ?? WR 3 month
The Vmem is 3.55Volts.......
A question.......IF I had a Pentium4 3.4GHz EE , what whould be my score then at the same speed???
did a pifast run myself today:
http://www.voidyourwarranty.nl/image...tc/48.97rs.jpg
http://www.voidyourwarranty.nl/image...tc/48.97rs.jpg
48.97s :)
Athlon64 3200+ @ 2521mhz @ 1.75v (CPU-z reports the vcore wrong)
Gigabyte GA-K8NNXP @ 280mhz
Kingston HyperX BH-5 @ DDR460
I get 44sec with my rig....
But in the future it will be lower (i am preparing my ram kingston with bh-5)
You have 44 sec pi fast with this setup?Quote:
Originally posted by overclockerr
I get 44sec with my rig....
But in the future it will be lower (i am preparing my ram kingston with bh-5)
You mean super pi ?
Once my boards hot flashed ill get into the comps :)
Edit: BTW what is pifast heavily based on?
Quote:
Originally posted by hipro5
Thanks Tom my friend....... :toast:
The Vmem is 3.55Volts.......
A question.......IF I had a Pentium4 3.4GHz EE , what whould be my score then at the same speed???
If you look at FUGGER on 13. place going 43.50 with P4@EE 4496 multi set at 16 compaired to bioblade on 18. place going 45.33 with 3.2@4470 multi 16.
Difference is 1.83 sek. Then if you had a 3.4EE you will go about 41.2 sek:cool: +- 0.1 sek
:toast:
44.5s at 4400MHz
43.7 at 4500MHz
43.5 at 4521MHz
then, I'm waiting for a FX-55 :) :D