moar volts lol, awesome job Dumo
Printable View
moar volts lol, awesome job Dumo
got you !Quote:
Originally Posted by ZenEffect
Thank you
£25 E-Bay GSkill PC3-16000 Pi Series fun :D
C-N - 6:20:500 - 50x100 - 1300MHz - 8-12-7-28-96-1 - Gigabyte UD5H - GSkill 16000 Pi Series 2x2GB - 1.965v - Stock Air
http://i106.photobucket.com/albums/m...PSC6m20500.png
http://i106.photobucket.com/albums/m...0500AIDA64.png
Nice find man!!!
aaah so unfair! Nice find dude!
-working on the subs :D
Bit more LV spanking :D
Sub 6m 20s goal reached so with a bit of luck that will be the last time they get voltage spanked.....
C-N - 6:19:687 - 48x102.1 - 1361MHz - 9-12-12-16-113-1 - Gigabyte UD5H - Team LV2600 2x4GB - 1.99v - Stock Air
http://i106.photobucket.com/albums/m...7206m19687.png
http://i106.photobucket.com/albums/m...9687AIDA64.png
yesss a fellow samsung volter, i love it.
These mems scale bigtime with volts. i wonder if some cooling will help
Cant see why not, I can run the next peg at 5G 2770 ish but have to slacken a little so I'm sure they would hold with a bit of cold.Quote:
Originally Posted by Vivi
Nice! 2v club ftw
and here i am panicking about running 1.86 on air...
Awesome run C-N:up:
2volters club:D
Quote:
Originally Posted by Splave
Ha ha thanks guys thats my take on round 2 :DQuote:
Originally Posted by Dumo
Same settings with my 3570K & CL10 get me 6m 20.265 with 1.795v so you should have sub 6m 20 easy with your 3770K :)Quote:
Originally Posted by AVulgarPicture
Wow, you guys have some bawls to push 2V through that ram! How many beers did it take to try 2V C-N? :D Someone should try cold on Sammies. 1400+ C9 possible?
Ha ha none this time it was cups of tea all the way!!Quote:
Originally Posted by Zeus
I sat down to break 6m 20 CL10 at about 9pm & by about 1:30am I had only managed to gain .350ms. I figured enough was enough let em have it dialled in CL9 & 1.99v & let’s get to bed. I gave it my best wazza & it ran sub 6m20 1st time.
I'm sure someone will show us the way with the Sammies.
hehe nice time C-N! :cool:
2volters club :ROTF:
Not as fast as i wanted but it's gettin better.
Zeus - 6:20:344 -49x102.1 - 1361.9MHz 10-12-12-24-110-1T - Asus M5G - Trident-X 2600 C10 2x4GB - 1.75V - H20 & air
http://i.imgur.com/tnkxz.png
^dram refresh interval can be jacked up to atleast +14000, looking good mate
l0ud_sil3nc3 - 6:20:000 - 47x106.4 - 1276.5MHz - 8-11-8-28-108-1 - Asrock Z77 OC - G.Skill RipjawZ 4x2GB - 1.85v - LN2 (cpu/memory)
http://i.imgur.com/epZpE.jpg
http://i.imgur.com/hDlJw.png
Beat my BBSE :D & Close to sub 19 but no cigar..... this time !!!
C-N - 6:19:047 - 50x100 - 1400MHz - 9-12-12-16-110-1 - Gigabyte UD5H - Team LV2666 2x4GB - 1.92v - Stock Air
http://i106.photobucket.com/albums/m...05G6m19047.png
http://i106.photobucket.com/albums/m...A646m19047.png
More MHz at less volts on the rams? Good job! :up:
New RAM Team LV2666 10.12.12, I could run 2800 with the 2600's but could not keep them tight.Quote:
Originally Posted by Zeus
Awesome run C-N:up:
2800 C9 on air is amazing! Well done C-NQuote:
Originally Posted by C-N
Quote:
Originally Posted by Dumo
Thanks guys things are starting to look good with this new high speed ram.Quote:
Originally Posted by owikh84
Everyone given up with this thread??????
Job done :D Tightened up tWL & tRTP & slackened tRFC then gave them more juice but in all honesty I think it was just a better run rather than the timings/voltage tweaking... Anyway I'm happy to get into the 18's
C-N - 6:18:984 - 50x100 - 1400MHz - 9-12-12-16-114-1 - Gigabyte UD5H - Team LV2666 2x4GB - 1.95v - Stock Air
http://i106.photobucket.com/albums/m...05G6m18984.png
http://i106.photobucket.com/albums/m...8984AIDA64.png
Another awesome run C-N:up:Quote:
Originally Posted by C-N
I will play with 2666 kits, just gotta find time off from work:)
Thanks Dumo, I'm still having great fun with 32M :)Quote:
Originally Posted by Dumo
Cool I'll look forward to your runs & ye I'm in the same boat ATM work wise this is the first day off I've had in almost a month.
Aristidis - 6:16:579 - 46x108.7 - 1304MHz - 7-10-6-18-1 - ASUS Maximus V Extreme - G.Skill RipjawsX 2x2GB BBSE - 2.0V - LN2
http://www.hwbox.gr/images/imagehost...b6e4ef12d0.jpg
Nice run Aristidis:up:
fantastic work aristidis!:up:
great stuff.
:eek2: holy cow Aristidis, very nice to see BBSE flying cold & fantastic 2V club entry too :D
Holy crap, nice one Aristidis!
no tweak win7 U 64bit,on my gaming PC
I7 3770K @ 5GHZ
ASUS Maximus IV Extreme
G.skill 2x2GB RipjawsX F3-17600CL7D-4GBXHD CL7-10-10-27 2T 2200MHZ 1.65v @ CL9-11-9-31 1T 1.665v 2400MHZ
http://www.gskill.com/products.php?index=374
32m 6m 36.943s
Attachment 130436
nice time Aristidis :clap:
Insane run Aristidis! :up:
Thanks a lot guys :) It was a good run, but we didn't have more LN2 to try even harder and push for 1st place. BBSE are awesome :p:
if you have the right one, of course :D
nice runs aristidis and c-n :)
Thanks but what do you mean if i have the right oneQuote:
Originally Posted by angoholic
...if you own the right ones. Very nice sticks indeed :)Quote:
Originally Posted by aristidis
After we got this heroic run with aristidis :D, we took a screenshot - what a thril that was :D Amazing run :up:
http://www.hwbox.gr/images/imagehost...b6fd5d1711.jpg
Aris looking like a BOSS!!!
Splave - 6:17:515 - 49x102.1 - 1326MHz - 7-10-7-25-1 - ASROCK OC Formula - G.Skill PI 2300 2x2GB PSC - 1.96V - LN2/SS
http://i.imgur.com/2SizZ.jpg
Limit of cpu 1354 fails immediately even 8-12-8 XD my luck with 3770k is so garbage :down:...will try a new one tomorrow. Board is efficient as hell.
Glad to see this thread so lively again:)
beer missing there !!! how come guys ? or its in the thermo hidden lol :confused2Quote:
Originally Posted by George_o/c
Quote:
Originally Posted by aristidis
Quote:
Originally Posted by Martin.v.r
Great run guys !!!Quote:
Originally Posted by Splave
Oh come on splave, push the ram to 1354 7-10-7 then XDQuote:
Originally Posted by Splave
It is hidden in thermo LN2 bier :hehe:Quote:
Originally Posted by andressergio
Here's a full video of the 6m16.579s run too :D
http://www.youtube.com/watch?v=GZsBRgLXGHI
Epic music guys!
Christian
Been playing with this today...... will have to test some older BIOS's as I couldn't get 2933 to run properly for some reason!!! Maybe my poor little chip has had enough :D
Looks like anyone with a decent IMC that can run 2933+ would be in business.
http://i106.photobucket.com/albums/m...A646M19375.png
Beastly Imc man. This on air?
Its better than most I have seen but you always want more!!! I've seen Dumo post a 3000 32m run over in the Gskill 2800 thread & would love to see someone run a tight 3000 in this thread.
The chip is on the Antec Kuhler 620 in my sig & the RAM is using the GSkill fan I got with my BBSE.
+1...Quote:
Originally Posted by youngpro
chance of good frequency chip over 6.9ghz 1%
chance of good IMC 3100mhz+ 1%
chance of getting both on the same chip -10000000000923%
frustration level over 9000
I Have 2 binned imc chip' one 3300 and one 3260Quote:
Originally Posted by Dumo
Non of them can pass 5.0ghz cpu ( air , ln2 ) when ram is tight timings i have reboot on one cpu and imc error on other one when run 32m
When loose timing i can do easy 5ghz cpu and +3000 mem ( air, ln2 ) but just need touch each of secondary or third timings same problem like before.
Not easy find a cou can do all , i have psc here can pass 32m at 2760 7-11-7 with ultra tight sec,third timings, but no cpu to match with them, also got +2600 cl6 bbse too.
Sent me some of them :DQuote:
Originally Posted by hiwa
One of them is rma chip but other one costs like 1k, didnt buy pretested but tried a lot of chips and sold craps with 80/100 chf lower than what i paid.Quote:
Originally Posted by aristidis
No not chips but memory :D
I protect my gskills like how i protect my ballsQuote:
Originally Posted by aristidis
if someone touch them is like bullet in my balls lol.
:up: :rofl:Quote:
Originally Posted by hiwa
Im sigging that..its just so funny.:rofl:Quote:
Originally Posted by hiwa
:wasntme: nice but only that bbse's 2600+ cas 6 nothing more :D
I just wanted to add my overclock the mix. I did not mess with ram timmings as I don't really know what I'm doing with ram. But this is what I can do.
http://imageshack.us/a/img84/2813/ivyat5ghz.png
Windows 7 64 bit.
HIWA fancy putting 2v to your balls?Quote:
Originally Posted by hiwa
Dude if u want doing it well, u will need +2.2 sometimes but need more hot lolQuote:
Originally Posted by M.Beier
I know that contest already ended but as lately I've been tuning my system for pi32m and used as reference values for this thread!!
So mi score is full air with asrocket! I think i can improve a little more...
http://imageshack.us/a/img248/2539/6m18s656.jpg
^^ Awesome run with bbse there Billy:up:
that's a great run
Would be interesting to know which mems on which voltage were used... maybe I know the kit :rofl:
Yap you know this kit :P (G.Skill Trident 2000mhz 9-9-9-24)1,92vQuote:
Originally Posted by websmile
Good to see they are still alive and do their job :D
Needs some work. Having a hard time getting higher memory clocks and it won't boot with anything over 1.82v set in bios.
Mikecdm - 6:21:765 - 50x100 - 1200MHz - 8-10-7-22-1 - Asrock OC Formula - G.Skill RipjawsX 2x2GB BBSE - 1.82V - Air
http://i.imgur.com/NdcXN.jpg?1
I got a bit better the score, this board has power inside!! :P
http://imageshack.us/a/img62/3755/6m18s375.jpg
Can someone tell me how much is the difference between 3570K and 3770K at identical clocks? thanks.
mtech - 6:18:875 - 47x106.4 - 1383MHz - 9-12-12-26-112-1 - Asus Maximus V Extreme - Corsair 2400C9 4x4gb/Samsung - 1.88v - cpu@cascade/mem@air
Attachment 130799
Great run mtech 2400C9's are so niccce :up:
Attachment 131006You liked that buddy ? How about this :D ?
6M 18.750 @full air
2800 9-12-12-21-1T,Corsair dominator 2666 sammy@1.9V. Cpu is a :banana::banana::banana::banana:hole,very hard to maintain stability@5ghz,pretty good&tight imc though.There is room for improvement,maybe 1s i guess,very hard to estimate when you get a reset once every 2 runs... :mad:
Anyone tried samsung@sub-zero,do they scale with temperature?
Nice :up:Quote:
Originally Posted by Alex-Ro
Did you give up with the 3570K?
Yes,it had bad imc,only 2722 and very unstable.
Good looking i7 :up:, awesome run Alex
@Alex-Ro
very good run
how much secs you cut with waza?
As gungstar, i would like to know which score do u have with no waza, for sub 6,20min .
Thnaks guys
I did not test without wazza,i always use wazza.As i said,there is room for improvement i guess 17 s is doable,i'm waiting for cold to arrive,cpu more stable in cold air @5ghz and more fun :)
Ok thanks! Could u run a simple test with no wazza plz? Will help me a lot to understand my os efficency :)
Thansk a lot
Alex
Mafio - 6:19:250 - 50x100 - 1399.9MHz - 9-12-12-21-110-1 - Asus M5G - Corsair Platinum 2666c10 2x4GB/Samsung ? - 1.92v - stock air
http://mafio.host56.com/imagehosting/?di=7914
first time I play with Ivy and 2x4GB RAM, still have to learn how to tweak the system properly.
p.s. Asus, we need more VDIMM, 1.92 volt limit is ridiculous...
You think they would scale abouve 1.92?Thank you for the screenshot,it seems like trwsr and trwdr are IMC related,i cannot run 4 on these as it give me not exact in round.
Very nice results here guys:)will join you soon...how much is 3770K more effective then 3570K? I saw C-N results and they are great with 3570K
BBSE time
Mafio - 6:18:906 - 108.7x46 - 1304.5MHz - 8-11-7-22-72-1 - Asus M5G - G.Skill RipjawsX 2133c8/Elpida BBSE - 1.86v - stock air
http://mafio.host56.com/imagehosting/?di=BHFD
p.s. AIDA64 score is messed up, read should be around 28500.
V nice BBSE & run there Mafio :up:
thank you C-N :)
l0ud_sil3nc3 - 6:19:079 - 108.6x46 - 1303.5MHz - 8-11-7-22-88-1 - Asrock Z77 OC Formula - G.Skill RipjawsX 2133c8/Elpida BBSE - 1.87v - cpu LN2 / memory air
http://i.imgur.com/0opu1.png
still not efficient for the clocks, need a better CW
Nice one! :)
nice run loud :)
Thanks Dan, I can not for the life of me get below 6:19:xx on this setup.Quote:
Originally Posted by Don_Dan
I will be trying a different OS tonight.
tRFC 72 and you are there :DQuote:
Originally Posted by l0ud_sil3nc3
Not sure if its ur os, my guess is better cw, try 2500 single file cd dc ( copy ) cd ( cut ) or use ramdisk and do one time cdQuote:
Originally Posted by l0ud_sil3nc3
ok so a new run with the exact same settings, just tweaked cw (657, 32, CDT) and no ram disk yet, working on that atmQuote:
Originally Posted by hiwa
http://i.imgur.com/aEX5o.png
I will also try a manual cw and see if that is any faster than OCX spi tweaker.
This is getting really fun now:D
Manual is always faster if u find the right cw for ur system.
Good to know so just a 2.5Gb rar file c>d with ramdiskQuote:
Originally Posted by hiwa
or
2.5Gb c>d d>c?
Setup eram and found this: http://img99.imageshack.us/img99/373...0003xa5mt1.jpg
for cw with eram do you go from ramdisk to c one time? or just c to d while ramdisk is running on Z?
Quote:
Originally Posted by l0ud_sil3nc3
http://www.xtremesystems.org/forums/...=1#post1630832
U find everything here .