Printable View
I am currently using 1705. I have had no problems with any bios since 1305. For me 1305, 1602 and now 1705 have been the best. I have not had 1705 long enough to know yet but, so far if there has been a best bios for my system it has been 1305. I will tell you though so far I am very happy with this new one. I'll know more in a few days.
WZ
What week and rev CPU do you have?Quote:
Originally Posted by WeldZilla
The frustrating part is that memset 3.0 does nothing. I can change all the settings to as loose as possible, hit apply, but the RAM will still mess up.. or sometimes I can't boot into windows in time to change the timings in memset to what they should be. This is G.Skill GBHZ DDR1000 D9 chips.. supposedly 4-4-4-12 at this speed. It works at lower FSB, but not at higher because I need to change subtimings but I can't because it's not in the BIOS and memset is totally useless.Quote:
Originally Posted by OldGuy
clockgen doesn't work either, I followed the instructions on their website.
I don't want to use clockgen, or memset. I want a BIOS that can handle this. :(
not sure on the actual cfm but its the same cooler that they used for the stock p4s, here are some links to info/performance comparison:Quote:
Originally Posted by Acidpunk_4
http://www.madshrimps.be/?action=get...03&articID=433
(Info)
http://www.madshrimps.be/?action=get...91&articID=519
(Comparison)
Here's my max stable FSB with my un-modded P5W DH Deluxe
http://img87.imageshack.us/img87/310...tablna4.th.jpg
Mine is a week 29 cpu.
I can't read it enlarged, anyone else?
sparx
says 470fsb... and i can read it fine.
its with an x6800 btw.
Rev A or B?Quote:
Originally Posted by WeldZilla
You know I am really liking this 1705 bios it has a nice feel about it. Smooth.
WZ
Where could one download the latest Asus Probe II? I know someone posted a link on this thread but I can't seem to find it.
WeldzillaQuote:
Originally Posted by WeldZilla
I took a peek at your 3d05 scores with your overclock 200 mhz higher than mine it apparently indicates that the video cards are bottlenecking bench scores.
We are at the same set resolution, and I am only at 3.6 but my score is right up there with yours. :confused:
http://img.photobucket.com/albums/v2...x21/3d0512.jpg
sparx
Thank you. :)Quote:
Originally Posted by lawrywild
I tried the latest 1705 bios and manage to boot up at 401 fsb (401x9), whee 1 more point.. :stick:
It seems I need better cooling on my cpu? I have at the moment Scythe Infinity.
What kind of cooling are people using who are at 3.6Ghz or above?
I use the Thermalright Ultra 120.Quote:
Originally Posted by Gascogne
I also have active cooling on the NB (factory) heat sink. Simply a 40 mm Radio Shack fan attached to the top of the HS.
sparx
Where can I get the files needed to setup ACHI properly before installing XP (using F-6) like people are talking about??
I tried this:
http://www.codemonkeyx.net/node/22
I copied the txtsetup.zip file at the end of the post and unzipped it on a floppy...... after F6'ing the four drivers show up, but when i select to install the Intel ACHI driver.... it says file not found.... insert another disk....
Whats the easiest way to get my istall in ACHI and then fix the unknow devices in device manager?
you need thisQuote:
Originally Posted by cdelong
http://downloadfinder.intel.com/scri...12094&lang=eng
well I tried 1705, and for me is the same s...
I mean, should we give up with this mobo, and the trfc thing?
Thanks dude!!
Me too. 1705 make absolutely no difference.
Quote:
Originally Posted by monza1412
So what vid card are you using sparx? I don't quite get what you are getting at. My score is just the limit of my card. 3D05 is not a good indicator of bottleneck nor is 3D03. 3D01 and Aquamark are much better indicators.
03 and 05 are way more graphic card dependant.
WZ
thanks for the info it was quite interesting to read thatQuote:
Originally Posted by UZ7
Who has tried PC8500C5D with P5W DH using these settings?
Performance Mode: Standard
PCI Express Frequency: 100
PCI Clock Synchronization Mode: 33.33
Memory Voltage: 2.25V
FSB Termination: 1.4
MCH Chipset Voltage: 1.65V
ICH Chipset Voltage: 1.20V
Anyone can help me... I'M getting a major wall when putting my fsb above 300 even by disabling Hyperpath 3... I crank up the voltage a bit nothing exceptional vcore between 1,35 and 1,40, vMCH at 1,50 or even 1,55, vICH at 1,05 and I tried 1,20 and my Ram is not the problem... I'm running atm 300x9 with my E6600 and everything is stable 10 hours orthos without a problem... My temps are fine too even running with stock fan... the problem is really at 300 fsb no problem but 301 fsb the computer won't even turn on :(
I need help!
Wow can you believe i switched to the Intel stock cooler and my Max load temps on orthos as far is 51 for the cpu and 56 for each core id say i shoulda used it from the start
Well i use those settings pretty much on my PC8500C5 Ram sticksQuote:
Originally Posted by Eastcoasthandle
just a little lower with the mem volt set to 2.2v
When i use those settings i run my pc stable at 333mhz*9 and Ram at 1000mhz
its rock stable
though you can go higher i had it at 350 aswell and it works ok just not as fast as the 333