Live MB OC Report :: ASUS Rampage Extreme

Printable View

Show 100 post(s) from this thread on one page

11-29-2009, 10:14 AM
MTP04

Sorry to hear about your loss Zeus.:(

Hopefully the cpu is still alive and kicking though.:)
11-29-2009, 10:57 AM
Zeus

Quote:

Originally Posted by MTP04

Sorry to hear about your loss Zeus.:(

Hopefully the cpu is still alive and kicking though.:)

Thanks man.

I tried the cpu in a P5W DH deluxe and although that board doesn't officially support 45nm cpu's it didn't boot.

Now that doesn't look good at all. :(

We'll have to see when the new RE comes in.
11-29-2009, 12:59 PM
zsamz_

Quote:

Originally Posted by Zeus

Thanks man.

I tried the cpu in a P5W DH deluxe and although that board doesn't officially support 45nm cpu's it didn't boot.

Now that doesn't look good at all. :(

We'll have to see when the new RE comes in.

damn:mad:
hopefully you didnt lapp the cpu
11-29-2009, 01:01 PM
zsamz_

Quote:

Originally Posted by kamieldehond

cant get my 4x1gb d9 stable above 500 fsb

i cant get my hypers to 2000mhz so we even:rofl:
my board not likin 4x1 hypers either:(
11-30-2009, 11:44 AM
MTP04

Quote:

Originally Posted by Zeus

Thanks man.

I tried the cpu in a P5W DH deluxe and although that board doesn't officially support 45nm cpu's it didn't boot.

Now that doesn't look good at all. :(

We'll have to see when the new RE comes in.

Are you sure?? Cause I am pretty sure that there was a bios update to support the E8600.
11-30-2009, 01:34 PM
Zeus

Could be but i haven't updated the bios on that board for ages. :D It has an E4500 running in it and that works great. With my E8600 in it there was no post whatsoever. :(

The cpu isn't lapped but i don't know if it's still under warrenty, it's over a year old.
11-30-2009, 02:28 PM
zsamz_

Quote:

Originally Posted by Zeus

Could be but i haven't updated the bios on that board for ages. :D It has an E4500 running in it and that works great. With my E8600 in it there was no post whatsoever. :(

The cpu isn't lapped but i don't know if it's still under warrenty, it's over a year old.

update bios to make sure its dead
oem is 1 year retail 3 EU is different ?
no matter still try rma;)
12-01-2009, 10:59 AM
subzero 1979

my mobo rampage extreme is dead
and my retailer dont have anymore this motherboard
how i can to have a replacement from asus?
thank you
12-01-2009, 11:11 AM
Leeghoofd

mail tech support, prepare to ship the mobo, and hope you have at least 3-5 weeks patience to get a repaired one

but normally ya vendor should take care of that the first two years...
12-12-2009, 08:02 AM
kamieldehond

would this F3-12800CL7D-4GBECO memory work on the rex?
12-26-2009, 11:06 AM
Jor3lBR

E8600@5100Mhz

I'm really enjoying this board. First stability run's:

E8600 Q820A727 5100Mhz + Super Talent Project X DDR3 1800 D9GTR (haven't tested lowest vcore yet, just quick stable run):

http://img710.imageshack.us/img710/1...0stable.th.jpg

http://img94.imageshack.us/img94/598...stable2.th.jpg

Code:

Extreme Tweaker Ai Overclock Tuner [Manual] OC From Memory Level Up [Auto] FSB Frequency [537] CPU Ratio Setting [9.5] * CPU clock skew [Auto] * NB clock skew [Auto] FSB Strap to North Bridge [200] PCIE Frequency [102] DRAM Frequency [1790] DRAM Command Rate [1N] DRAM Timing Control [Manual] 1st information CAS# Latency [7] RAS# to CAS# Delay [7] RAS# PRE Time [7] RAS# ACT Time [21] RAS# to RAS# Delay [Auto] REF Cycle Time [68] WRITE Recovery Time [Auto] READ to PRE Time [Auto] 2nd information READ to WRITE Delay(S/D) [Auto] WRITE to READ Delay(S) [Auto] WRITE to READ Delay(D) [Auto] READ to READ Delay(S) [Auto] READ to READ Delay(D) [Auto] WRITE to WRITE Delay(S) [Auto] WRITE to WRITE Delay(D) [Auto] 3rd information WRITE to PRE Delay [Auto] READ to PRE Delay [Auto] PRE to PRE Delay [Auto] ALL PRE to ACT Delay [Auto] ALL PRE to REF Delay [Auto] DRAM Static Read Control [Auto] DRAM Dynamic Write Control [Auto] > DRAM Skew Control : DRAM CMD Skew on Channel A [Auto] DRAM CLK Skew on DIMM A1 [Auto] DRAM CLK Skew on DIMM A2 [Auto] DRAM CTL Skew on DIMM A1 [Auto] DRAM CLT Skew on DIMM A2 [Auto] DRAM CMD Skew on Channel B [Auto] DRAM CLK Skew on DIMM B1 [Auto] DRAM CLK Skew on DIMM B2 [Auto] DRAM CTL Skew on DIMM B1 [Auto] DRAM CTL Skew on DIMM B2 [Auto] Ai Clock Twister [Auto] Ai Transaction Booster [Manual] Common Performance Level [7] Pull in of CHA PH1 [Disabled] Pull in of CHA PH2 [Disabled] Pull in of CHB PH1 [Disabled] Pull in of CHB PH2 [Disabled] (-- Manual --) EPU II Phase Control [Auto] *** Please key in numbers or select voltage!*** CPU Voltage [1,61250] Load-Line Calibration [Enable] CPU PLL Voltage [1,5773] FSB Termination Voltage [1,39...] CPU GTLVref(0) [+40] CPU GTLVref(1) [+40] CPU GTLVref(2) [Auto] CPU GTLVref(3) [Auto] NB GTLVref [+30] North Bridge Voltage [1,69] DRAM Voltage [Auto] NB DDRVref [Auto] DDR3 Channel A Vref [Auto] DDR3 Channel B Vref [Auto] South Bridge 1.5 Voltage [1,57...] two or three step up for your RAID South Bridge 1.05 Voltage [1,09...] two or three step up for your RAID ****************************************** CPU Spread Spectrum [Disabled] PCIE Spread Spectrum [Disabled]
12-26-2009, 11:35 AM
zsamz_

Quote:

Originally Posted by Jor3lBR

I'm really enjoying this board. First stability run's:

E8600 Q820A727 5100Mhz + Super Talent Project X DDR3 1800 D9GTR (haven't tested lowest vcore yet, just quick stable run):

nice pl7 @ 537fsb
i guess you likin the 200 strap:p:
12-26-2009, 12:31 PM
Jor3lBR

Quote:

Originally Posted by zsamz_

nice pl7 @ 537fsb
i guess you likin the 200 strap:p:

Yes zsam very stable strap! Thanks for the pointers :up:
12-26-2009, 12:42 PM
radaja

nicely done Jor3lBR,looking forward to more results from you with this board:up:
12-26-2009, 05:37 PM
zsamz_

Quote:

Originally Posted by Jor3lBR

Yes zsam very stable strap! Thanks for the pointers :up:

enjoy the board buddy
you doin great on it
makes me wanna build a 3 stage unit:D
12-27-2009, 09:20 AM
Jor3lBR

Quote:

Originally Posted by radaja

nicely done Jor3lBR,looking forward to more results from you with this board:up:

Quote:

Originally Posted by zsamz_

enjoy the board buddy
you doin great on it
makes me wanna build a 3 stage unit:D

Hey guys, thanks!

Anyone know the ropes to boot stable with low volts at 600x8.5 2001Mhz DDR3 cl8?

I tried a lot of stuff but it just needs a heck of more volts to get into Win7, like 1.75nb and 1.7vcore etc...

What kind of settings I have to look at to get that 600Mhz working good?
12-27-2009, 10:19 AM
Leeghoofd

Maybe give 333 strap a go mate, with it I need only 1.55NB voltage and 1.35ish VTT to get 600FSB and 1920Mhz C7-8-7-20 fully stable on air, however I PL is 9 and clock twister set to Moderate. but very nice clocks for daily use. For benching most use the 266strap with 2:3 divider for high +600FSB clocks

For benchign turn off Loadline calibration when pushing high volts !! (at least that's what everyone told me to do to not waste the Samsung chip on the backside )
12-27-2009, 10:32 AM
Jor3lBR

Quote:

Originally Posted by Leeghoofd

Maybe give 333 strap a go mate, with it I need only 1.55NB voltage and 1.35ish VTT to get 600FSB and 1920Mhz C7-8-7-20 fully stable on air, however I PL is 9 and clock twister set to Moderate. but very nice clocks for daily use. For benching most use the 266strap with 2:3 divider for high +600FSB clocks

For benchign turn off Loadline calibration when pushing high volts !! (at least that's what everyone told me to do to not waste the Samsung chip on the backside )

Hey Leeghoofd,

I guess you are right the culprit is the 200 strap. I was getting Memtest #7 errors no matter the volts.

I was able to fine tune some settings that I never touched before to get lest errors on Memtest #7:

nb skew from auto to 100ps
nbddrref from auto to +50mv

I guess the key to stability lies on those settings for each setup.

I tried to fine-tune the other settings like cpu skew and ddrchA and chB with no luck it keep giving me more Memtest #7 errors.

I still have a lot to learn here.

Strap 333 made all those errors go away :up:
12-27-2009, 12:59 PM
zsamz_

Quote:

Originally Posted by Jor3lBR

Hey guys, thanks!

Anyone know the ropes to boot stable with low volts at 600x8.5 2001Mhz DDR3 cl8?

I tried a lot of stuff but it just needs a heck of more volts to get into Win7, like 1.75nb and 1.7vcore etc...

What kind of settings I have to look at to get that 600Mhz working good?

its been a while i remember priming 600x7.5 and a run @ 600x8
i do remember nb @ 1.75 333-400strap
i bumped sb +.05
i got a set of 2x2 adata2k cas9 comin in hopefully they will be hypers
12-27-2009, 01:13 PM
radaja

its been awhile for me as well but i have this SS with voltages.
maybe it can help.i think my ref voltages were all on auto.
http://i25.tinypic.com/95ugqu.jpg
12-27-2009, 01:17 PM
Jor3lBR

@ZSAM AND RADAJA

Thanks guys,

I'll give 600fsb a try problem is when you are using 8.0 to 8.5 multi is a hole different story on cpu-vtt-pll adds a lot of pressure to the OC. I'm discovering some interesting things on some settings, too bad I don't have much time to test stability on this board, it needs to go freeze fast :-)
12-27-2009, 01:40 PM
Leeghoofd

what 8 and 8.5 multi lol ? 10 is the way to go Joriber :p
12-27-2009, 02:48 PM
Jor3lBR

Quote:

Originally Posted by Leeghoofd

what 8 and 8.5 multi lol ? 10 is the way to go Joriber :p

10x600 on Linx?! Gonna xplode any cooling solution you throw in.

I'll save that for benching under LN2 ;)
12-27-2009, 02:51 PM
Leeghoofd

Stuff Linx, do you think you need that stability for benching ? I only Memtest my settings ( test 5 and 7 ) then test with 7 multi under air and then we mount the phase or pot :p
12-27-2009, 03:19 PM
zsamz_

Quote:

Originally Posted by Jor3lBR

10x600 on Linx?! Gonna xplode any cooling solution you throw in.

I'll save that for benching under LN2 ;)

linX you crazy it would :explode: even @ 500x9 gets damn hot
linx so much harder n hotter than prime
you dont need no prime for benchin neither lol

Show 100 post(s) from this thread on one page