Right now I'm testing CPU @445x9=4005 and RAM @534/5-5-4-9 - all (sub)timings the same sa given few posts aboveQuote:
Originally Posted by Origin_Unknown
Everest memory performance looks like this
http://img409.imageshack.us/img409/4618/x382xy0.jpg
Right now I'm testing CPU @445x9=4005 and RAM @534/5-5-4-9 - all (sub)timings the same sa given few posts aboveQuote:
Originally Posted by Origin_Unknown
Everest memory performance looks like this
http://img409.imageshack.us/img409/4618/x382xy0.jpg
i took out my mushkins with d9gkx to test out a pair of kingston value d9ghm
2.2v
i finally broke 11000 lol
with a little tweakin should get better
my new 24/7:D
cpu 1.54v
vdmm 2.1v
woot nice one zsamz_
zamz nice work, is that your normal 4 gmh sticks but with performance lvl 7 and whats the NB voltage and phase settings still eaeee eaaee
I was looking in the DFI manual and it said that PCIE 1, 3 and 4 are all x16. I'm wondering if there would be an impact on performance if I run my single GPU in slot 4? In case anyone is wondering why, my OCZ xtc ram cooler won't fit with the GPU in slot 1 and my SB waterblock blocks slot 3.
slot 4 is a 4x electrical pci-e1 slot so i wouldent use it for grafix, but slot 3 works great
and u dont need a water block on the SB it barely needs a heat sink
no bud its my crappy kingston value pc2-667 lol "d9gmh"Quote:
Originally Posted by zanzabar
i had to go performance level 8 @ 535fsb lol but phase settings are eaeee
i got another pair in my hr-07s:D
my 2 sets of ballistix 8500 been put away for a rainy day
i put my mushkins that couldnt go past 1155 with 2.32v into my old p35 now they doin 1200+ with 2.22v
i wasnt happy with those d9gkx but my son lovin em now
since i broke 11000mbs my next goal is to break 12000mbs:D
takin a break soon i will see how high i can go lol gonna try 2.32v next
now i really cant wait for my block to arrive so i can flash to the x48 bios on a new block and keep my original intact
Quote:
Originally Posted by zsamz_
:rofl: mine is still something like 7800mbs
Hmm..ok. I got mine yesterday and I set the Vdimm to 2,35v, which is the intended volt at 1150MHz, and I ran them at 1280MHz fine. Will try higher clocks and I'll post screens later on.Quote:
Originally Posted by zsamz_
man i thought you had it already biosdepot is quick n cheapQuote:
Originally Posted by zanzabar
took 5 days for me to get mine i'm in canada :rofl:
i paid 24$ for 2 chips shipped:D
i miss the days when it way 5$ for a damn chip
my sons pc was @ 8500mbs:rofl: now he happy with 10200:p:Quote:
Originally Posted by Origin_Unknown
i just tested mine in p35c-ds3r n they did 1226 with 2.22vQuote:
Originally Posted by Effet
i couldnt do 1055+ with 2.32v in the x38
New BIOS for the 'bold' ones:
http://www.dfi.com.tw/Support/Downlo...FLAG=A&SITE=US
If you flash it to x48,can you flash it to x38 again?
Anyone tried to flash a x38 to x48 with the 03/20 bios? Results?
Yes, zsamz did:
http://www.xtremesystems.org/forums/...postcount=2531
It's still working. X48 is just a binned X38.
So did felix bg:
http://www.xtremesystems.org/forums/...postcount=2536
Ah sweet, might flash aswell.
Btw http://img90.imageshack.us/img90/3228/mem1254rk2.jpg
Was able to boot up at 1300MHz, but as soon as windows started to load, BSOD ruined the fun =/
2,38v is at the edge of doable for me, 2,4 > is quite risky.
I'm not that familiar with the GTL settings. How's the impact of increasing/decreasing them? When is it effective to increase/decrease them?
dont worry i gonna try it verry soon and will report backQuote:
Originally Posted by Jor3lBR
edit:ok i loaded it i see nothing different in performance over first bios
btw i used winflash was lazy lol
edit2:i dont like the new bios system reboots n posting code errors
Quote:
Originally Posted by zsamz_
Which hr-07 did you pick up? I'm trying to decide between the older one and the dual. I like the old setup because of the fan mounting and the extra surface area.
the ones i got were the highriseQuote:
Originally Posted by PhilDoc
you gotta get the lower ones to run 4 stix
Quote:
Originally Posted by zsamz_
So you got the H ones? I'll only be running 2 sticks. Trying to decide between the H/L series or the original.
whatever you do get the ones that come in a kit of 2 the singles cost moreQuote:
Originally Posted by PhilDoc
i like em high they get more air "no i not smokin"
you gotta get 2 low n 2 high to run 4 stix not 4 high lol
so did i, and proof that itÄs the same thing isQuote:
Originally Posted by t_ski
a) the flash works
b) the bios says x38/x48 series on the logon screen, so they dont even differ between x38/x48
Performance increase with X48 bios i'd say is wishful thinking....or as eva2000 said probably because NB voltage-table glitch is still in the bios, resulting in dangerously high NB voltages for all "made in china" boards selecting certain NB voltages, resulting in better stability at tighter timings (yeah, running NB at 1.76V, much luck with that :)
I personally dont think the X48 bios is worth it:
a) old bugs are sitll in there (still resetting to default cmos values with 8x multi and certain straps on otherwise stable settings)
b) dangerous NB voltages bug might kill china boards
c) no real performance increase (IMHO)
Yeah, I know. Can you put a fan on the H/L series. I know the singles cost more, but you can mount a fan easily and it has more surface area to cool. I haven't seen any reviews to see witch is better and the cost is only about $4 higher. I'm only planing on running 2 sticks anyway. Maybe I'll just flip a coin, lol.Quote:
Originally Posted by zsamz_