Printable View
Have you tried bumping VTT/FSB Term, and maybe PLL volts?Quote:
Originally Posted by aoch88
Just a small amount though like 1.20v for VTT, and 1.60v for PLL.
This may be whats needed since your having to push higher FSB frequency
on a e8200. Also you may need to play around with your GTL Ref voltage.
http://i44.photobucket.com/albums/f1...table44ghz.jpg
Hey Guys just got a spanking brand new E8500 from tigerdirect yesterday. this thing is stable at 1.5V load 4.4ghz...can prime @ 4.5ghz, but it fails @ 30 minutes, and can boot into windows @ 4.6ghz and play games or run benchies. has been running prime so far for 12+hrs. will call fully stable once it hits 16hrs. and oh i need 1.29Vcore to run stable @ 4.0ghz. i think i got an average chip...considering its an E8500. my 24/7 overclock will be 4.0ghz at 1.29vcore.....:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:
what is your vid shown on core temp and batch so ?Quote:
Originally Posted by Motivman
your ram is running too fast/tight without VDimm to support the FSB? Small FFT's works, but Blend Fails...Quote:
Originally Posted by aoch88
mine degraded again.
That sounds promising for a sweet 24/7Quote:
Originally Posted by Motivman
I want to try one of these E8500s
Very nice!:up:Quote:
Originally Posted by giorgos th.
I got me a Q807A050, tray version, today.
Seeing some good results with Q807 batches, I was expecting some from it.
Guess I have a dud.
Only does 3750 at 1.296V, what a POS.
At 3800 and 1.296V, Prime crapped out after 10 seconds.
Just tested it for 1 hour, as it wasn't worth wasting my time on it.
Got my E8200 back in.
Whatever, better luck next time. :D
Too bad. I was thinking about going down to the shop tomorrow since they just got a bunch in and digging to see if I could find a good batch....:(Quote:
Originally Posted by Jupiler
It was the only Q807A i found (by luck).
Checked in 4 stores and most of them were :
Q802Axxx (3 tray versions, 2 boxed)
Q805Axxx (about 5 trays)
Q808A120 (2 boxed)
Also found a couple of Xeons 3110.
Q805A165
Q806A227
think I might give a Xeon a try.
That sucks.. :p: I can imagine how happy you was, when you found that Q807..Quote:
Originally Posted by Jupiler
I love my Q807! It runs like hell. Finally sub 10m 32M, and still some potential left! :up:
http://www.abload.de/img/9m53s_32m_4700mhz_1.6xy.jpg
Most impressive, xxx (damn', I forgot your name :D )
4700 with only 1.480V, :shocked:
I'm still angry at myself for not getting one of those from HPM.
But as usual, it's a crapshoot. I might have gotten a dud one too, you never know.
But I still have my nice E8200, hehe.
alo
here is mine E8400 after some tests:
E8400 @ 4662mhz 9x518
P5K-E @ 1012
TG Elite 2x2GB e @ DDR1036 2,10v
http://img90.imageshack.us/img90/820...ub10spimx4.jpg
http://img90.imageshack.us/img90/762...4700mhzuu6.jpg
nothing special but not so bad at all either :p:
Thanks but Foxconn Mars does not have such settings.Quote:
Originally Posted by CrazyNutz
What'dya think fellas? Try for higher OC? :up:
My 1st quick try, meager compared to others, but an improvement on my e6850 @ 3.8 that gave me ~13s 1M SP. And at $480 for the cpu ($220), mobo($60), ram(50), hsf(55), and psu(95), I'm pretty happy so far.
e8400 Q806A320 1.1125v VID 1.3625v BIOS 1.328v idle 1.312v load
ga-p35-ds3l rev. 2.0
corsair dominator 2x1Gb 1066
zalman 9700 led
ocz gameXstream 700w
temps around 37C / 46C idle 42C / 50C load (core 0 / 1) and 23C ambient
11.672s 1M
18 hours ORTHOS
19 hours Prime
No... your good. Nice low volts. You dont want to ruin that. I never got my 1.375 back after messing around trying to go higher... but if you are like me you will want to max this sucker out and see what it can do. I did suicide runs with 1.6v 3dmarking trying to break my own record. It's fun! :up:Quote:
Originally Posted by resyn
My Orthos Beta always give me a wrong speed way off. For example if i'm at 3.8 it indicate 4.5 ghz ... very weird..
Orthos and windows will give a whacked speed as they always see the default multi. If you run 8.5 by 400 say, they will report 9x400 speeds.Quote:
Originally Posted by GOZR
Larry
Well, I couldn't help myself, so last night i went 525 x 8.. Here we are :
Gonna keep orthos running for awhile longer, that 1.340 is with 1.3850 set in the bios. First vCore I went with after upping from 450 x 9..
Think that's the best chip here at XS atleast :)
what a golden one!
Got My P5E and E8400 running at 4005
All stable on 1.39 bios say 1.45
Decided to push my E8200 (Q740A621) a little more and see what it would do.
So far, it doesn't look that bad at all.
Ran Prime Small for 6 hours at 4300Mhz and 1.344V, Prime Large is running for almost 3 hours now.
The custom package will be ran afterwards.
4300Mhz, 1.344V :
http://www.abload.de/thumb/4300_smalltests38.jpg
Prime Large at 4300 seems ok too.
Off to bed now, more testing tomorrow.
http://www.abload.de/thumb/4300_largetest6yx.jpg
Golden!
I'm getting new ram next week, can't wait to see what this thing can bench :yepp:
http://i151.photobucket.com/albums/s...m1/4ghz121.jpg