has anyboday used F5a yet?
F4a was very unstable, constant bsod 124
I can't believe that there has not been one decent bios released for this board yet, I am on F3h and it is ok but all of the bios need work imho.
Printable View
has anyboday used F5a yet?
F4a was very unstable, constant bsod 124
I can't believe that there has not been one decent bios released for this board yet, I am on F3h and it is ok but all of the bios need work imho.
F5a , for ud7?
where can I download it?
I agree, gigabyte support suck!Quote:
Originally Posted by l0ud_sil3nc3
yes hard to believe from gigabyte sitck with F3H best so far...Quote:
Originally Posted by l0ud_sil3nc3
do u guys use turbo boost when OC ? i never touched it its still enabled...
BIOS rule... the POST will display the highest clock configured in BIOS (including turbo ratio).
i told you all gigabut gonna slack off on bios support lolQuote:
Originally Posted by andressergio
hopefully they get their heads out of the sand by the time i get back my board from rma
but i doubt it :rofl:
So far F4 been good to me:)
Imo, its all depend on how good your Sandy is
As long as bios boot at 100 BCLK and cpu's max multi then ramped up with easy tune to cpu max. mhz.
Reboots with C1 twice still happened often, but it will post windows after a few try
This went all night long:)
http://img835.imageshack.us/img835/3...enshot032c.jpg
amazing chip Dumo !Quote:
Originally Posted by Dumo
cheek 5,5Ghz@1,45vcore :shocked: I think you want me to sell this one :rofl:Quote:
Originally Posted by Dumo
great chip buddy :up:
Wow Dumo, and i thought that i had a high binned one.
Now try 8 threads and LinX with AVX :D I'am curious what you're chip does than.
I squeez't this out today, gonna do a 20 run for the linx stable club later.:D
http://i.imgur.com/jOdBkl.jpg
GA-Z68X-UD7-B3 - F7h
-Fix Touch BIOS
-16.Jun 11
CPU-Z 1.58 Beta
http://www.fileden.com/files/2010/4/...-32bits-en.zip
- AMD FX "Bulldozer" processors family.
- Intel Sandy Bridge-EP processors preliminary support.
Edit:
Still bug ,
show VTT voltage on Gigabyte Z68X-UD7 (maybe new BIOS?).
http://i7.aijaa.com/b/00304/8229568.png
http://i10.aijaa.com/b/00346/8229711.png
All Z68 series official BIOS updated.
CPU-Z 1.58
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-setup-en.exe
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-32bits-en.zip
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-64bits-en.zip
- AMD FX "Bulldozer" processors family (K15).
- AMD Llano processors family (K12).
- Intel Sandy Bridge-EP processors preliminary support.
Quote:
Originally Posted by stasio
Any love for P67's?Quote:
Originally Posted by stasio
Would be nice. Haven't seen a damn thing for them since Z68's came out.
Any way thanks stasio.
Quote:
Originally Posted by Dumo
:D
http://www.shrani.si/f/23/13J/2cMFgDQr/pi.png
that isn;t totally true, there is this boot loop that will restart after less than 1 sec, and then it keeps going. you gotta pull out teh 24 pin connector and clear CMOS and then it works fine.Quote:
Originally Posted by Leeghoofd
:clap:very nice work, that is a great chip, max multi x57:up:Quote:
Originally Posted by cole2109
and great memory speed/timings. keep it up.
This "forgotten" UD7 B3 stuck with F4 bios. Lol
Even with those new Z68 boards stole the limelight, its still going:)
http://img28.imageshack.us/img28/838...enshot099p.jpg
Have to dust off my old 4890 top...
http://img200.imageshack.us/img200/1...enshot043u.jpg
http://img594.imageshack.us/img594/7...enshot095c.jpg
One more run before gpu go cold...Gotta chase that E8600 @6.5Ghz!:)
http://img837.imageshack.us/img837/1...nshot104ff.jpg
Almost there, nice run.
Thanks Tom:)
Got it with CF
Next will be 1X 5870...chase that MIVE @ #1:)
http://img856.imageshack.us/img856/5...enshot108l.jpg
2220 6-9-6:clap:Quote:
Originally Posted by Dumo
great job and killer chip, so close to 59xx:up:
great run dummo :up:Quote:
Originally Posted by Dumo
wish I had a nice cpu like that ... in fact I'd me more than happy with a x55-x57 chip ... but luck was not on my side this time
keep up the great work :)
Thanks L_SQuote:
Originally Posted by l0ud_sil3nc3
Probly maxed for this ram and so far 5850Mhz 4C/4T for this chip under SS....it won't run Vantage cpu and wprime 4C/8T @ max. wall though
More cold probly help, but I doubt it
Thanks kagula, its pure luck and quantity really helpQuote:
Originally Posted by kagula323
Testing '05 4890 CF
No bios refresh, still F4, probly Giga can pull a MIVE ones...New P67 UD7-B3 bios specifically for '01:)
http://img840.imageshack.us/img840/5...enshot049a.jpg
Great score Dumo! GT1 and GT2 scores are awesome.
Quote:
Originally Posted by Dumo
sick score man! great work!