First Look: Teamgroup 2x512MB PC4000 BH-5

Quote:

---

Originally Posted by s7e9h3n

Hmmm...that's quite odd for old school bh5's. IMO, playing with TRFC values seems much more of an issue with the UTT/New BH5's built on the BP PCB's.

---

actually only utt ch5 have a problem with trfc below 14. all BH5 ive seen can do trfc 12 but they may gain a few MHz with a higher trfc.

As long as my pair has been critized as hand-pick, and s7e9h3n would probably like to see, let's see and play:D..think about if I have someone's all alumium ultra-D or venus(well Oscar promise me but now he regret)...basically,that performance is NOT what he wanna discuss about what type of ram can be adjusted or improved; those MFs are just wanna secure their name on this forum, shame on them..period.http://www.ocxtreme.org/onepagebook/tu.gifhttp://www.ocxtreme.org/onepagebook/tu.gifhttp://www.ocxtreme.org/onepagebook/tu.gifhttp://www.ocxtreme.org/onepagebook/stupid.gifhttp://www.ocxtreme.org/onepagebook/stupid.gifhttp://www.ocxtreme.org/onepagebook/stupid.gif

I have told steve, this ddr560 pi set I have been working on for a long time ago, it's dang hard and still there, for me , it 's not gonna make any sense if your life is just wanna get some WR back, I know I can, just don't wanna put my name with those who only know how to do the :hump: with their master.

16m and 32m still work on...

http://www.ocxtreme.org/onepagebook/...5ddr560/1m.jpg

http://www.ocxtreme.org/onepagebook/...5ddr560/2m.jpg

http://www.ocxtreme.org/onepagebook/...5ddr560/4m.jpg

http://www.ocxtreme.org/onepagebook/...5ddr560/8m.jpg

Awsome,

Crazy Awsome, make my 250Mhz 2-2-2-5 HP3200 UTT Mushkin look Bad.:cool:

Good work:D

Quote:

---

Originally Posted by 4Qman

Awsome,

Crazy Awsome, make my 250Mhz 2-2-2-5 HP3200 UTT Mushkin look Bad.:cool:

Good work:D

---

oh ya, friend sent me a pair of old school muchkin, 338wf, for me, I would say cpu rules all memory parameters.;)
there are only two secondary timings between ultra-D and expert in terms of a64tweakers table "appearance"; expert not really faster than ultra-d
if you are using "right BIOS"; this is truth unless you try; ask Steve;).

http://img474.imageshack.us/img474/2...562pi8m3pg.jpg

Quote:

---

Originally Posted by Onepagebook

oh ya, friend sent me a pair of old school muchkin, 338wf, for me, I would say cpu rules all memory parameters.;)

---

snap, a week too late for me :p:

Quote:

---

Originally Posted by ozzimark

snap, a week too late for me :p:

---

Look like somebody got some new/old Kingstons (right)?

Quote:

---

Originally Posted by s7e9h3n

Look like somebody got some new/old Kingstons (right)?

---

actually, i'm the original owner of these babes, got em back in the winter of 03 iirc. pc3200, 2x256mb kit. never really pushed em too hard cause i'm not a huge fan of the higher voltages... they've actually never even been past 3.2v in this ultra-d. i should give it a go sometime though, but not now ;)

Quote:

---

Originally Posted by ozzimark

actually, i'm the original owner of these babes, got em back in the winter of 03 iirc. pc3200, 2x256mb kit. never really pushed em too hard cause i'm not a huge fan of the higher voltages... they've actually never even been past 3.2v in this ultra-d. i should give it a go sometime though, but not now ;)

---

Kingston Bh5's can be good:

http://img435.imageshack.us/img435/8...x280bh56mb.jpg

i'd agree. i messed with one of the sticks back in my s754 days back beore i really had any clue what i was doing, managed this with either 3.5 or 3.6v.. forget which :slapass:


http://eclipseoc.com/phpwcms_filestorage/1/1_174.png

Quote:

---

Originally Posted by Onepagebook

As long as my pair has been critized as hand-pick, and s7e9h3n would probably like to see, let's see and play:D..think about if I have someone's all alumium ultra-D or venus(well Oscar promise me but now he regret)...basically,that performance is NOT what he wanna discuss about what type of ram can be adjusted or improved; those MFs are just wanna secure their name on this forum, shame on them..period.http://www.ocxtreme.org/onepagebook/tu.gifhttp://www.ocxtreme.org/onepagebook/tu.gifhttp://www.ocxtreme.org/onepagebook/tu.gifhttp://www.ocxtreme.org/onepagebook/stupid.gifhttp://www.ocxtreme.org/onepagebook/stupid.gifhttp://www.ocxtreme.org/onepagebook/stupid.gif

---

kinda lost here......who was that directed at hehehhe

Quote:

---

Originally Posted by Onepagebook

As long as my pair has been critized as hand-pick, and s7e9h3n would probably like to see, let's see and play:D..think about if I have someone's all alumium ultra-D or venus(well Oscar promise me but now he regret)...basically,that performance is NOT what he wanna discuss about what type of ram can be adjusted or improved; those MFs are just wanna secure their name on this forum, shame on them..period.

I have told steve, this ddr560 pi set I have been working on for a long time ago, it's dang hard and still there, for me , it 's not gonna make any sense if your life is just wanna get some WR back, I know I can, just don't wanna put my name with those who only know how to do the :hump: with their master.

16m and 32m still work on...

---

Very nice sticks you got there :toast:

Quote:

---

Originally Posted by ozzimark

snap, a week too late for me :p:

---

ha:D
now, if and only if I can get it back when I accidentally sold it ; the only old school bh-5 placed on the bp808;)

http://img113.imageshack.us/img113/1597/340wf6xv.jpg

Quote:

---

Originally Posted by Onepagebook

ha:D
now, if and only if I can get it back when I accidentally sold it ; the only old school bh-5 placed on the bp808;)

---

:confused: !!!

though that got me thinking. technically, it should be possible to remove chips from one PCB and put them on another... :D
too bad i've only got enough chips to make one 512mb stick, and none of the tools to do the work properly :(

though that's something that is very definitly new to me... i guess some mfg held onto a few of the bh-5 chips for a while. i wonder who :p:

The OCZ 3500 Plat.LE BH5 I'll be testing within the next few days were cherry picked bh5 chips on a bp808 pcb. ;) That's sexy...

Quote:

---

Originally Posted by EnJoY

The OCZ 3500 Plat.LE BH5 I'll be testing within the next few days were cherry picked bh5 chips on a bp808 pcb. ;) That's sexy...

---

sweet stuff that is my 2x 512MB OCZ PC3500Plat LE BH-5 one stick does 277mhz 2-2-2-5 at 3.67v but other only 269-270mhz 2-2-2-5 at 3.71v lol

OPB guess it ain't that hard with all the ram ya got to accidently sell off the wrong modules LOL

hmm, look what i found :D
http://www.tankguys.biz/team-xtreem-...00-p-1539.html

Team Xtreem in the states for the win. :cool:

Quote:

---

Originally Posted by ozzimark

hmm, look what i found :D
http://www.tankguys.biz/team-xtreem-...00-p-1539.html

---

That was fast :D

Just an FYI to everyone: We're currently only running drop ships from Teem, so availability may be sketchy for a bit. I've requested some evaluation modules from them (we'll see if they comply) so that we can do some internal testing as well... hopefully they send some over so we can check them out.

If they do well and we're happy with them, we'll try and stock a bunch of thier stuff, and expand our listings.

Quote:

---

Originally Posted by ozzimark

hmm, look what i found :D
http://www.tankguys.biz/team-xtreem-...00-p-1539.html

---

uh pc3200 :stick:

Quote:

---

Originally Posted by Lastviking

uh pc3200 :stick:

---

i know, but it's a start ;)
http://www.tankguys.biz/team-m-62.html

i'm waiting for my micron based cronus to show up. they have the samsung version

Quote:

---

Originally Posted by TankGuys

That was fast :D

Just an FYI to everyone: We're currently only running drop ships from Teem, so availability may be sketchy for a bit. I've requested some evaluation modules from them (we'll see if they comply) so that we can do some internal testing as well... hopefully they send some over so we can check them out.

If they do well and we're happy with them, we'll try and stock a bunch of thier stuff, and expand our listings.

---

Can you get the 4000's?

Quote:

---

Originally Posted by njkid32

Can you get the 4000's?

---

I'll talk to him about those. Ben's a good guy and open to selling whatever the enthusiasts desires. :)

Quote:

---

Originally Posted by njkid32

Can you get the 4000's?

---

I'm working on getting them all listed.

Part of the problem is that Teem only has certain modules even available in the US right now... as an example, they only have the Samsung Cronus modules in right now. There's basically only one version from each model line (Cronus, Proseidon, Zeus, and Appolo) (Oh, and that's thier spelling, not mine ;) ) available in the US right now.

I've got all the ones that are physically available listed, as well as some which are not. I just put up the Micron based Cronus modules up, but I haven't got an ETA for them. I imagine there will be a fair amount of interest in them, so if you guys are chomping at the bit, either toss a post up on our forums or shoot us an e-mail via our website so that we have an idea how many to order.

Like I said, it's going to be a bit hairy in getting these for while, since Teem is just getting a foothold here. We'll do the best we can though.

Quote:

---

Originally Posted by TankGuys

I just put up the Micron based Cronus modules up, but I haven't got an ETA for them.

---

<3 :D

Quote:

---

Originally Posted by ozzimark

<3 :D

---

Yea what can I say, we took your live-help request pretty seriously :)