Printable View
Guys, what's about Toledos of 0601 (4400+). Won't it be a mistake for me to take one? As far as I understand, those few weeks (before NewYear and after) were devoted to the selection of best chips for FX-60? Am I right? The cause of my disturbance is that I won't have the possibility to exchange the sample. While I hope to get 2.8GHz on my LanParty NF4 SLI-DR
update on my X2 3800+ LDBFE 0614WPMW
http://i3.photobucket.com/albums/y90...rime3800x2.jpg
wr prime it is sure hot this time off year
http://i3.photobucket.com/albums/y90...r/DSC08044.jpg
setup like it looks now
http://i3.photobucket.com/albums/y90..._ripper/26.jpg
little pi run under mach2
http://service.futuremark.com/compare?3dm05=2099823
3.3ghz @ 1.71vcore
thats for now
just got a new x2 3800 LDBFE 0608 RPBW, hope this one is a goodie.....hopefuly ill have it up and running by the weekend, just waiting on the egg and atacom to ship my new hardware
I just got a new 4400.
These are the specs:
CCBWE 0609 DPMW
Batch C 60341
Do you have some informations about the stepping ?
http://valid.x86-secret.com/show_oc?id=108682
http://www.xtremesystems.org/forums/...16#post1615316
Max so far was 2850mhz benches shown in link. Will try to get a validation of the suiside 3ghz shot again. Stupid Cpuz cus it was out of date the 1st time.
well i picked up a cheap 4800
http://valid.x86-secret.com/show_oc.php?id=108860
ccbwe 0602 bpmw
stable at 2.92 gig @1.6v ihs removed under water so far 4 hours.
i needed 1.64v for a 3g ss,i cant get it stable at all.
I have the same stepping and I'm curious as well, although after a systool find max FSB run it seems to top out at 2500:mad: even with LDT = 3, VCORE 1.45, and 1/2 divider...strange thing is SYSTOOL also crapped out at 2500 with stock VCORE, LDT = 5(?), and a 1:1 divider:confused:Quote:
Originally Posted by Shakermaker
I'll be back later, I only spent about 1.5 - 2hrs poking around.
Quote:
Originally Posted by h@RRy
I have the same stepping...and mines crapped out at 2475....i think i can do 2500 but the temps got really high.. 52 or so...what are your temps?
X2 3800 Toledo:
ADA3800DAA5CD
LCBIE 0618EPMW
Vcore: Auto (BIOS)
http://img465.imageshack.us/img465/8...312vzo7.th.png
:slobber: 2.8ghz at stock volts 1.35v?? Is that the real voltage?Quote:
Originally Posted by davidian
Picked up X2 4200 for $185. LDBFE 0619WPMW Seems about average. 2.7ghz @ 1.485v Runs hot though, I might have to take off the ihs. With a big typhoon, I'm getting temps in the mid 50's. Probably could get 2.8 with more volts. Still, I'm happy with this, been running rosetta for about 10 hours now.
Yeah, it's real voltage. We have three CPU's from LBCIE 0618EPMW series (forum.purepc.pl), and each do 2800Mhz @ ~stock voltage.Quote:
Originally Posted by Tictac2
Yeah, BI mem controlled x2's are good to date :banana: 0621/0625 VPMW & WPMW's are also pulling the same results.
Got a LCB1E 0619 RPMW @ 2.75Ghz stock voltage for now.
Heres the beginning of the initial 2.7Ghz run, 10 mins after it was installed :D
http://img206.imageshack.us/img206/9775/sdyf6.th.jpg
Will update you guys with the max I achieve once new PSU etc arrive.
BTW, I would be interested to know the TCaseMax for the cpu's you BI guys have :toast:
2.9Ghz @ 1,36v
http://img272.imageshack.us/img272/3...360vfh4.th.png
Sorry for my noobiness:slap: but will a LCBIE 0618RPMW be the same?Quote:
Originally Posted by davidian
Pretty close.Quote:
Originally Posted by Tictac2
Counter CD has one, pulling fairly similar results. He got up to 3.1Ghz. (Link)
I have mine all up to 2.9, but for an everyday overclock i settled for 2.7, even though i can have it at 2.8, but i do believe it will only last 50% of the time if i stick it on full throttle 24/7 :slapass:
I have mine all up to 2.9, but for an everyday overclock i settled for 2.7, even though i can have it at 2.8, but i do believe it will only last 50% of the time if i stick it on full throttle 24/7 :slapass:
I got one yesterday from MicroCenterQuote:
Originally Posted by davidian
LBCIE 0618EPMW
batch 0686
2800mhz@stock volts 3hrs+ dual prime so far :banana: :banana: :banana:
1.575@ 3000mhz core1 craps out ~40 minutes dual prime, Core0 still going strong there:fact:
http://img169.imageshack.us/img169/8...3hrswt6.th.jpg
:toast: :banana:
Just got a LCBIE 0618RPMW x2 3800+ from eBay (for less than what i would buy for it from a shop :) ) so am hoping for great things. ..
These steppings seem to go incredibly far on stock volts, but then not as further as one would think on more volts. . ?
I'm thinking that it should work well with RMClock. . .becuase of the low volts.
(It works well with my 3500+ Venice - 230mhz fsb, x11 multiplier. Down at 1.4ghz when I'm not doing anything intensive and then it ramps up to the full 2.53ghz when I do. IMO, every overclock on stock volts should be teamed with RMClock, I can't see any disadvantage with it.)
I've just bought a Scythe Ninja Plus so I'm hoping that will work well with it.
Does this make the list? On air.
http://img341.imageshack.us/img341/7...board01go3.jpg
LBCIE 0618EPMW update
on air, TTBigTyphoon, ihs still intact:
SP32M@3000mhz
http://img20.imageshack.us/img20/895...p32mxy9.th.jpg
http://valid.x86-secret.com/show_oc?id=110261
SP1M@3100mhz
http://img191.imageshack.us/img191/5...sp1mcp7.th.jpg
http://valid.x86-secret.com/show_oc?id=110263
Well I am extremely dissapointed on my new purchase =(
I recently got a 3800X2 939 Manchester
0623 XPMW not sure of the first 5 letters but its the common ones on here...
Im pretty sure this chip sux and I really wanna exchange it grrr....
its not stable on anything above 2400mhz right now...it takes 1.47 to do that even stable. I tried 1.38v at that speed but BSOD with prime runnin both cores =(.
I verified it wasnt my HTT limit on board, cuz I lowered multi and ram and cranked the HTT to 280+ and I know it does 295mhz with my single core 3000+
I know the drivers are installed correctly I did it per recommendation of first post in this board. I also correctly switched HAL's to ACPI Multiprocessor in device manager. I know it aint that, thats causing the problem...that would be even if it werent oc'd.
My RAM I tried both auto settings and manual settings all below 200mhz...
It wont even do 2.55ghz @ 1.52v =(
My temps are 35C Idle @ 2.4ghz 1.47v load they approach 50C
My motherboard is Biostar Tforce6100-939
Im so pissed ... anyone have any ideas?
Thinkin about just putting my 0517 3000+ APAW back in here which can run 2.66ghz on this board just fine!
HELP!!!
AMD X2 3800 Manchester core
ADA3800DAA5BV
LDBFE 0609XPMW
Liquid cooled - 2800mhz (vcore:1.456v)
http://img82.imageshack.us/img82/443...temsfa9.th.jpg
Work-in-progress
:rocker:
AMD X2 3800 Manchester core
ADA3800DAA5BV
LDBFE 0626 EPMW
So far 250 default prime 1h.....
http://img67.imageshack.us/img67/953/img0804ee0.th.jpg