Printable View
Finally I got 3Ghz:
http://valid.x86-secret.com/cache/38494.png
http://valid.x86-secret.com/show_oc.php?id=38494
1.64vcore
like 20 sec after that the system locked up..
What is max safe voltage for my 3700+ in short benchmarks? 3dmark, superpi etc. I'm on watercooling.
0508EPMW Cooled Water IHS On !!
3GHZ at 1.4 Vcore !!
http://www.forumdeluxx.de/gallery/da..._1_4_Vcore.JPG
3050MHZ 1.48 Vcore !!
http://www.forumdeluxx.de/gallery/da...73050-1_48.JPG
3.1 GHZ 1.52 Vcore !
http://www.forumdeluxx.de/gallery/da...-1_52Vcore.JPG
Neext few Days a go to max OC :)
With my old Sd3700+ make my Ram 2x512mb A-data pc600 2.5-4-3-3 max 305 FSB 1:1 Stable but with this SD is max 312 FSB , but i now this yet since last Test !!
Jep only 2.7 Vdimm
0532 XPAW
Max SPi 1M with Air Cooling:
http://img393.imageshack.us/img393/5...72355wm.th.jpg
Grettings
Atleast this with Air Cooling :D :Quote:
Originally Posted by LANero
0524XPBW
http://koti.mbnet.fi/dani69/DFI%20nF..._5m15s_AIR.gif
Here is the barrier to coldbug :( :( :(
http://koti.mbnet.fi/dani69/DFI%20nF...%20Prime95.jpg
I got a new 3700+ installed, forgot to write down the stepping, but from memory 0533**CW.
It' currently @ 290 x 10 " 1,62v, loadtemps 52C / 45C / 38C.
Still testing.
http://img.photobucket.com/albums/v4...-IGN/27ice.jpg
:D On ice water. Close to 1.9V set in BIOS.
This thread is ONLY for showing results/screenshots. There's another thread for discussions. Thread cleaned!
Thank you.
My final SP2004/P95 results on phase change:
OS - Windows Server 2003
Mainboard - DFI NF4 Ultra-D
CPU - San Diego 3700+ 1MB L2 "CABGE 0515SPMW"
Cooling -
SP2004 (Prime95 GUI) SmallFFT @ 3311Mhz
SP2004 Blend @ 3311Mhz
Sandra benches @ 3311Mhz
First try with new chip. With the VX so i need the divider unfortunately, never ran them on this board/ram and something aint right. Mach (unmodded) is having a hard time keeping temps below zero under load. Quite pleased with first result though :)
http://img.photobucket.com/albums/v6..._oc/33248M.jpg
http://img.photobucket.com/albums/v6..._oc/33701M.jpg
UPDATE:
Still with Thermaltake Big Typhoon, room temp ~24ºC/75ºF
DFI nF4 SLI-DR
4000+ SD
2*512mb Mushkin RL XP4000
SP8M
http://koti.mbnet.fi/dani69/DFI%20nF..._5m02s_AIR.gif
SP32M, fluff :(
http://koti.mbnet.fi/dani69/DFI%20nF...24m53s_AIR.gif
CPU: 4000+ 0505FPMW
MOBO: DFI nF4 SLI-D
MEM: G.skill PC4000 2GB HZ
COOLING: Dangerden TDX, Dtek 50Z and HWlabs Xtreme1
http://www.xs4all.nl/~famchow/A64_40..._SP2004_WC.JPG
http://www.xs4all.nl/~famchow/A64_40..._SP2004_WC.JPG
http://www.xs4all.nl/~famchow/A64_40..._32MSPI_WC.JPG
I thinks the temps are little high, strange this one is hotter then X2 3800 @1.5v..
FX-57 CAB2E 0531RPMW
http://i7.photobucket.com/albums/y29.../Imagem026.jpg
http://i7.photobucket.com/albums/y29...x577800gtx.jpg
3300mhz 275 x 2-2-2-5 Sanmax 339WF
http://valid.x86-secret.com/show_oc?id=41618
here's my KAB2E 0532XPMW
http://venus.walagata.com/thumbs/agunn_3k.jpg
AMD 3700+ San Diego Core
ADA3700DAA5BN
KAB2E 0532XPAW
1303057H50533
2860Mhz 260x11 1.40v + 110%
Air cooled 38C full load, 28C idle
Images Removed... Sorry
Update!Quote:
Originally Posted by toreide
I'm now stable at 2.9ghz with 1.568v. I'm now using ocz vx3200 memory on 5/6 divider @ 2-2-2-6. Gives me better performance than my 4800 @ 2.5-4-3-7 with no divider.
Graphics card is x800xl @ 452/560 mhz
Scores:
Aquamark: 83878 (12054-13783)
3Dmark05: 5902 (cpu 6327)
Sandra mem bw: 7140/7077
Sandra cpu arithmetic: 12189 / 4574 / 5927
Sandra cpu mm: 27642 / 29711
SuperPi 1m: 29,188
SuperPi 32m: 25m 49,125
Tweaked memory to try to improve performance. Settings as in screenshot. Loadtemps are also as seen here as I was running P95 torture test.
http://i20.photobucket.com/albums/b2...e/100_3154.jpg
I have not had the time to run all of these test yet, but updated scores are added.
Scores:
Aquamark: 83878 (12054-13783) --> 84004 (12057 - 13851)
3Dmark05: 5902 (cpu 6327)
Sandra mem bw: 7140/7077 --> 7180/7116
Sandra cpu arithmetic: 12189 / 4574 / 5927 --> 12208 / 4576 / 5930
Sandra cpu mm: 27642 / 29711 --> 27653 / 29763
SuperPi 1m: 29,188 --> 29,109
SuperPi 32m: 25m 49,125
These settings have not been tested for stability. I will update as soon as I have.
Finally completed OCCT test:
http://i3.photobucket.com/albums/y55...mhz-234mem.jpg
http://i3.photobucket.com/albums/y55...9-CPUGraph.gif
I think this temperature is kinda high for my 3700+ on watercooling, or what?
not @ 1.6v just keep it under 40c.
http://s10010001.shackspace.com/Mics/3700stepping.jpg
This is prime stable for +12 hours, I wanted to play some Bf2 after than so I stoped it...
http://s10010001.shackspace.com/Mics/2800MhzSD.JPG
This is shootin for a high, it ran windows just fine, but anything intense like BF2 of prime crashed right away....
http://s10010001.shackspace.com/Mics/3Ghz.JPG
Sorry about the [H]ard|OCP stuff, i orignally posted over there...
http://i20.photobucket.com/albums/b2.../32m_3g_vx.jpg
http://i20.photobucket.com/albums/b2...g_loadtemp.jpg
http://i20.photobucket.com/albums/b2...de/SuperPi.jpg
Not tested for stability yet. Seems very responsive to voltage. Wish I had some eXtreme cooling.....
Some results of my 4000+ SD 0515 SPMW (cpulloverclock SD) on air (XP120 + Enermax UC12FAB 12V) :
max s-pi 1M : http://img62.echo.cx/img62/1372/spibestsd4ec.th.jpg
s-pi1M 28GP : http://img221.echo.cx/img221/4350/spisd28gp3eo.th.jpg
max cpu-mark : http://img270.echo.cx/img270/3883/maxcpumark8hr.th.jpg
max screen : http://img278.echo.cx/img278/9277/maxscreen1pd.th.jpg
2.8Ghz stability : http://img275.echo.cx/img275/8474/stabsd28002ku.th.jpg
Have some problems with my DFI motherboard, probably best results coming soon :D (until I get an opty with CABNE 0528 stepping ... :rolleyes: ).