Wow you guys are having some grest results with these sticks! I was wondering are you guys having better luck with the yellow or orange slots and which bios 510-2 or the Hellfire 510-2?
Printable View
Wow you guys are having some grest results with these sticks! I was wondering are you guys having better luck with the yellow or orange slots and which bios 510-2 or the Hellfire 510-2?
I've only been using 510-2 and the yellow slots.Quote:
Originally Posted by TheMeatFrog
How would you guys say these G. Skill UTT-BH sticks compare to the OCZ Gold UTT-BH sticks? Do they overclock about the same or is the OCZ more hit and miss? I dont plan on using any more then the 3.3V jumper on my DFI board so i'm trying to figure out which would clock the best with that amount of voltage.
Does the G. Skill warranty only cover up to 2.9V? How come they dont support the higher voltages in their warranty like OCZ does?
http://www.newegg.com/Product/Produc...factory=BROWSE
The price just dropped on Newegg to $150.87. I just ordered a set.
$150?! Lucky u. mine cost £140 approximately $252. Doh! :slapass:Quote:
Originally Posted by burningrave101
I had a set of the OCZ gold before the GH. They only went to 251Mhz prime stable. Eva2000 has some good sticks which are hitting 268 with an SD. I have to say, $150 for 1GB GH is an awesome price! I don't know about the warranty on them in regards to anything over 2.9v. I've ran mine all the way to 3.7v but i'm currently using only 3.3v. i'm hoping i won't need that warrany :)
Well, i'd really like to know what voltage their rated up to and how good G. Skills warranty support is in comparison to OCZ.
Ordered me a set of those GH as well... I am anxious to see how they perform like? :DQuote:
Originally Posted by Agent-JCDenton
Mine cost me about 210euro though... Germany's shop trust sucks :(
Overpriced everywhere I found them. :slapass:
Let us know how yours performs as I'm not having any luck whatsoever with my pair. Not even 240 at super relaxed timings (2.5-4-3-7!). I am so very mad, I think I'm gonna stomp them under my feet. Crap! :mad: :mad: :mad:
You dont want to relax the timings like that on BH-5 memory. It will just perform like crap. Keep the timings around 2-2-2-5. How much voltage are you using? You may just need to burn them in or up the voltage more or get some cooling on them.
Yeah, i get all sorts of problems with CAS 2.5, especially with these sticks and relaxing a few other timings tends to give the same results. You want to use 2-2-2-x, find a good tref and optimal drive strength combinations - I'm assuming you're using a DFI nF4 board.Quote:
Originally Posted by burningrave101
Send them to me instead :D (I'd even pay shipping :hrhr: )
Quote:
Originally Posted by jcniest5
No cold boot with this GH :toast: ...
Heres...
http://img195.echo.cx/img195/7760/fx55bn125jc.jpg
http://img195.echo.cx/img195/1835/fx55bn114ex.jpg
DON'T!!!!! You have PM - edited by bachus_anonym.Quote:
Originally Posted by mad mikee
Try with 3.2V@240-2-2-2-5 and if you run with 5V pin mod on your dfi, make sure the psu can supply enough juice...Quote:
Originally Posted by jcniest5
I've been trying that combo for weeks, no luck. The conclusion was that maybe my particular board, a REV.AB0 doesn't like this memory for some unknown reason. I can OC my G.Skill value memory ZX better than this GH memory. AngryGames and RGone are not able to offer any useful hints. I wanted to RMA this board but they said I can't do that just because my board doesn't OC as well as I expected. I'm out of luck, but to sell my board. If anyone is interested in buying DFI board, go here and check out my For Sale thread: http://www.abxzone.com/forums/showthread.php?t=94170Quote:
Originally Posted by Dumo
You should of bought your board from Newegg and then you could of RMA'd it without any problem if you were having issues with it.
Yes, I did buy it from Newegg (the DFI). I tried to RMA it, they said I have to go thru manufacturer on the mobo. It's stated clearly on the sub-description, too.Quote:
Originally Posted by burningrave101
newwegg seems to have taken the F1-3200BWU2-1GBGH out of their catalog.... crap 150$ was a great deal...
Reference post - edited by bachus_anonymQuote:
Originally Posted by gulp35
http://www.newegg.com/Product/Produc...ription=20-231Quote:
Originally Posted by gulp35
Thats strange, i wonder why Newegg no longer has it listed? Do they not expect to get any more in stock?
Quote:
Originally Posted by Onepagebook
Mine ain't :(
Mine ain't even capable of 240 it seems... tried hundreds of different TREFs and driving strength settings...
And I should know how to set it up ;) Furthermore there's enough screenies around (in this thread for example).
I am not impressed I must admit... :nono:
Its back in stock at Newegg for $150.87 now.
I got mine today and i'm currently testing them out at just 2.9V 220Mhz 2-2-2-5. I start getting Memtest errors at 225Mhz at that vDDR.
Let's say @ 2.9V and you could do 220MHz error free in Test 5 that's real good already, not to mention 2.9 at 225 2-2-2-5.Quote:
Originally Posted by burningrave101
BH-5 needs V to fly. My OCZ Value VX (BH-5) does 240 2-2-2-5 at 3.1-3.2 on DFI LP B.
my Gskill GH:
260@3.6V 1.5-2-2-5 1T dual 2x512
Price drop again at Newegg. Their down to $147 now.
What burn-in process are you guys using on these sticks? Do you just set a certain voltage and let Memtest test #5 run 6-8 hours at a time? Do you recommend using low or high voltages to burn-in? I dont plan on using more then the 3.3V jumper on my DFI Ultra-D.