kinda odd way to do it.. maybe a ploy by asus to make sure you have to use their software to get accurate results? I just hope MBM gets updated soon for the nforce2
Printable View
kinda odd way to do it.. maybe a ploy by asus to make sure you have to use their software to get accurate results? I just hope MBM gets updated soon for the nforce2
but their own software doesent report correctly !! it reports the socket thermistor !! MbM will get updated .. they are workin on it !
Indeed they need to get on the ball... and I'm working on getting those readings, I have been too busy using the comp!! No time to shut it off haha!Quote:
Originally posted by Barnaby
kinda odd way to do it.. maybe a ploy by asus to make sure you have to use their software to get accurate results? I just hope MBM gets updated soon for the nforce2
This has to be the best thread I ever read! Thanx!
Another happy customer! Wonderful! :)Quote:
Originally posted by mikedick6969
This has to be the best thread I ever read! Thanx!
Sorry but really can't be arsed to browse through all thread;)
But:
Any way to get rid of the cold boot problem @ high FSBs?
Sysfailur:
New BIOS is out (1001E)
And new chipset drivers from Asus (12/5/2002)
Just a heads up :)
Hot damn... I'm going to sleep now.. (yes, very early). I'll install them tomorrow :)Quote:
Originally posted by Hallowed
Sysfailur:
New BIOS is out (1001E)
And new chipset drivers from Asus (12/5/2002)
Just a heads up :)
Dunno what ya mean... I would suggest maybe slacking mem timings? Perhaps up voltages--there could be numerous reasons.Quote:
Originally posted by Purity
Sorry but really can't be arsed to browse through all thread;)
But:
Any way to get rid of the cold boot problem @ high FSBs?
I don't see that bios.... link?Quote:
Originally posted by Hallowed
Sysfailur:
New BIOS is out (1001E)
And new chipset drivers from Asus (12/5/2002)
Just a heads up :)
Yeah, all 10 pages. Excellent reading! Definately printworthy!Quote:
Originally posted by sysfailur
Another happy customer! Wonderful! :)
That link doesn't work. I'll host a mirror on my site here: http://www.maximumoc.com/files/1001E.BINQuote:
In those pictures that you showed in Page 7...what is that thing on your South Brige controler - The MCP-T. But I'm planing on just doing the Vcore mod. So all I do is ground out that one and it should do...thats it? I see you have mentioned the ground on the Chassis Fan...and I'll do that...but just need to make sure that this is all i have to do in order to have the higher VCores. Look at my pictures for my specs and stuff!
Also...does anyone know how/where to point me on modding my GF4 Ti4200 /128 card?
Hey Sys, why is that BIOS version not on their deluxe page site?
sys,
any input from Asus regarding voltage/temps reading in bios yet?. i hooked up Prommy and not only lost ability to see what temps my cpu is running at, but also can't see voltage rails and such. it's kinda annoying if you ask me. check out my air-cooled score, btw:)
Can I get a MP of 13.5 with a 2400+ and Asus A7N8X Deluxe??
The second pic shows the frequency........ [http://www.valleyhuskers.com/image22resize.jpgQuote:
Originally posted by Mikee
That was the same pix I just posted about, but if you actually save the jpg and look at it in paintshop, the PC Geiger below with his FSB of 190 only shows a reading of "3" it doesnt show "34" like he says. He said elsewhere that he is on vacation until this week when he will do more testing with it.
I have seen it posted a couple of other forums that the PCI is locked, including the indirect reference to other NF2 boards having locked PCI in this ABIT NF2 review shown here. Read the end of the 4th paragraph on the conclusion page. Still, I have not seen what I would call absolute proof, or what happens to the PCI if you crank up the AGP to 80 or higher.
i wish John (candjac) could come up with some answers... after unlocking 2400+, i have lost 13x,13.5x,14x and up.Quote:
Can I get a MP of 13.5 with a 2400+ and Asus A7N8X Deluxe??
I only can change my MP tp 15 and up
But I want MP 13,5 ±'. Someone know how to do it
You can connect to pins on the bottom like on this page http://www.dark-tweaker.com/xp2200_oc.htm or this page might be useful...just a little bit more complex! It's here http://www.beachlink.com/candjac/TbredDecode0.htm
That's my memory variable resistor.... pretty large eh? hehehQuote:
Originally posted by Retupmoc
In those pictures that you showed in Page 7...what is that thing on your South Brige controler - The MCP-T. But I'm planing on just doing the Vcore mod. So all I do is ground out that one and it should do...thats it? I see you have mentioned the ground on the Chassis Fan...and I'll do that...but just need to make sure that this is all i have to do in order to have the higher VCores. Look at my pictures for my specs and stuff!
If the back of your card looks like this, then this is the mod you want: http://www.xtremesystems.org/forums/...5&pagenumber=1Quote:
Originally posted by Retupmoc
Also...does anyone know how/where to point me on modding my GF4 Ti4200 /128 card?
Got me, maybe they don't like us.... this 1001E was from the nforcershq.com forum.Quote:
Originally posted by Mikee
Hey Sys, why is that BIOS version not on their deluxe page site?