Any Nforce4 updates?
Printable View
Any Nforce4 updates?
Does the booster work with the DFI LP UT S754 board ? thinking about 1x OCZ VX + booster..
when will the s939 LP board come ?
Mongoose lost a 9NDA3 board with the booster :explode: early on after the boards were released. I would say that the same holds true for the 8KDA3 as well. They both use the same chip to control mem voltage. The same vmod works for both boards ;)Quote:
Originally Posted by andyOCZ
Incompatability may have to do with vmem being supplied by 5v rail
How do I know if my booster is revision 2 or not? Thanks.
it says it on the left
http://www.xbitlabs.com/images/memor...er/booster.jpg
gocchin: did you install the booster before you put on your xp-90?
i know you told me to put RAM in after i put in xp-90 but what about booster?
EDIT: Just re-read your PM, you said put ram in then booster, both after xp-90 then attach fan, sorry for the confusion!
:toast:
The booster works great but if you put the memory in slot 1 and the booster in slot 3 only one stick can be used. You have to mod the booster or as I have heard you can put the booster in slot one, but overclocking is not as good. I have not tried the booster in slot 1.Quote:
Originally Posted by the_n00b<:o)
Hehe thanks I must be blind... it's just hard to look at it when it's squeezed in there ;)Quote:
Originally Posted by DevilsRejection
Hey guys, just letting you know I posted up a mod guide for the Booster here:
http://www.xtremesystems.org/forums/...ad.php?t=48617
It's mostly pics, but pretty well explains how to make the Booster work on DFI and Chaintech socket 754 boards. It might also help some NF2 guys.
Nice mod Andy, should help a lot of people :D
Added : GA-K8NF-9 support OCZ DDR Booster. So far i can reach 3.4volt vdimm
Asus A8V just 3,1 ... bad ovp ... heh
Epox KDA3J rev 2.2 doesn't work with the booster, tried but the PSU doesn't even power on
What power supply? Some won't work. I am not sure if the Epox has been tried.Quote:
Originally Posted by Millyons
Enermax 460
Ya I read somewhere that the 8kda3 has been tried but the board died, that was iirc on a earlyer rev of the board, so it could be that, even though the vdimm vr are the same on all revs.
I used the booster on an AN7 with the same psu and it worked (kinda, vdimm variated alot)
Working good on Neo2 Plat. 4th slot.
Enermax PSUs have been an issue and are not booster friendly. Try another PSU if you can. Just beware that we don't know if that board is compatible.Quote:
Originally Posted by Millyons
This might be the reason why i'm stuck at 230fsb @ 3.2v. The reading on the booster changes from 3.2 to 3.1 and even 3.0 during gaming and it gives artifacts sometimes. Hopefully my new PSU can fix this. :)Quote:
Originally Posted by andyOCZ
I'm getting a 510 p&c turbo cool deluxe btw.
Anyone know if OCZ DDR-Booster works on the ASUS A8N-SLI?
Quote:
Originally Posted by andyOCZ
I already did the vdimm mod so i don't need the booster on the epox, i just wanted to post that it may be incopatible with the 8KDA series
it doesn't work i heard ...Quote:
Originally Posted by luseruser
modded booster works fine on nf7-s rev2.0
will the ddr booster work on the MSI K8N diamond ???
I have no idea what that board is. Do you mean Platinum, if so then yes.Quote:
Originally Posted by Dynasty
He means the nf4 MSI K8N Diamond
How about Abit KV8 Pro 1.1 s754 board??
I´ve read about Abit AV8 s939, and I suppose that they use the same circuits and IC´s to regule voltages, but I want to hear something about the booster and KV8 Pro, someone had tried it??
I need more Vdimm to buy OCZ VX, but no vdimm mod exists for KV8 Pro... :( :(