1Mohms !!!! you should try 10 inches floppy wire and do the psu mod to adjust man ;)
Printable View
1Mohms !!!! you should try 10 inches floppy wire and do the psu mod to adjust man ;)
I may have to. I'll see what I'm getting on my 3.3v rail tonight.
i measured 10 inches wire with my poor multimeter , it said 1,5 ohm
Here is the back of the 939 gigabyte.
So what cap leg do I connect the atx 3.3 to??
OPP
right there OPP
whats wrong with 3.3v on the BH-6 ?
a circle rather than a black dot that looks like a hole may have been a better idea ;)
Use a thick wire for +3.3 = vdimm, small wires cant handle the amperage.
I'd have used a red dot but I think we get the idea.Quote:
Originally posted by STEvil
a circle rather than a black dot that looks like a hole may have been a better idea ;)
Use a thick wire for +3.3 = vdimm, small wires cant handle the amperage.
pkrew...your X800 XT is on it's way.:up:
Well, I was in a hurry, lol. Thanks Storm, looking forward to it.Quote:
Originally posted by StormPC
I'd have used a red dot but I think we get the idea.
pkrew...your X800 XT is on it's way.:up:
Finally hit 27s on generic winXP
Nice bud! :up: Your ram is kickin a s s! I can only get 264 3D stable, Sandra I can get 268 or so. Lookin forward to your 3D runs once you get your card. 35K will be done very easily with your HTT and ram running the way they are.
very good man :D you've got "THE" rig !
Thanks my friend. That ram has always been good to me esp on giga A64 boards. I tried the 2 x 512 of eb and ran some 3d at the same clock. Was hoping that the 1g of memory would increase my score. Even though I was running 3225 the bh-5 was over 200 points faster clock for clock.Quote:
Originally posted by oc-rookie
Nice bud! :up: Your ram is kickin a s s! I can only get 264 3D stable, Sandra I can get 268 or so. Lookin forward to your 3D runs once you get your card. 35K will be done very easily with your HTT and ram running the way they are.
WTG, pkrew. That's one kick-ass set-up you got right now. :toast:
Do you have your sandra 04 mark scores?Quote:
Originally posted by pkrew
I tried the 2 x 512 of eb and ran some 3d at the same clock. Was hoping that the 1g of memory would increase my score. Even though I was running 3225 the bh-5 was over 200 points faster clock for clock.
What is the point to the Supper Pi?
The Sandra memory score are in the thread. The rest of Sandra is pretty much meaningless IMHO
WOW, just to show the power of 939
This is at 12 x 244, stock card clocks
http://service.futuremark.com/compare?2k1=7967894
This is at 11 x 266 Stock card at 555/610
http://service.futuremark.com/compare?2k1=7968195
cats 4.5
BTW Stormpc, you did a great job with the card, you're my hero atm.
Looks good. Stock cooling still on the XT, right?:toast:
Yes, still stock cooling, vanilla winXP. My copy of win2k is defunct after 5yrs.
Cool!:cool:Quote:
Originally posted by pkrew
Yes, still stock cooling, vanilla winXP. My copy of win2k is defunct after 5yrs.
I just remembered all my benches were with the 3D sliders in default position. I couldn't figure out how everybody was cleaning my clock in Nature!:lol:
I should be able to do closer to 31.5k with no mods or tweaks (OC and sliders excepted of course).
Good job so far.:thumbsup:
Looking good :toast:Quote:
Originally posted by pkrew
WOW, just to show the power of 939
This is at 12 x 244, stock card clocks
http://service.futuremark.com/compare?2k1=7967894
This is at 11 x 266 Stock card at 555/610
http://service.futuremark.com/compare?2k1=7968195
cats 4.5
BTW Stormpc, you did a great job with the card, you're my hero atm.
Those lobby scores are impressive
Pkrew,Quote:
Originally posted by pkrew
WOW, just to show the power of 939
This is at 12 x 244, stock card clocks
http://service.futuremark.com/compare?2k1=7967894
This is at 11 x 266 Stock card at 555/610
http://service.futuremark.com/compare?2k1=7968195
cats 4.5
BTW Stormpc, you did a great job with the card, you're my hero atm.
'grats, man.........that's showin' the FX/939 powaaa', lol.
Thanks charlie, I'll probably be able to top 34k with stock cooling on the card. I suspect someone with cascade will hit near 38k
Wow ! congrats :toast:
This mobo is the winner guys.
Thanks pkrew and misteroadster for sharing your findings.:toast:
I got my FX today, just started testing. Running my Mushkin rock solid at a mild 250 for starts, 2-2-2-5.
Want to test the FX first for MHz before I push the memory.
And check out the temp moniter. This bugger reads just 4 degrees warmer then my Evaporator, very nice.
Finnally a motherboard that reads into the -80s:D
OPP