the fact that the x800pro bios is a .bin and not a .rom doesnt make any diffrence?Quote:
Originally posted by Shroomalistic
exactly, i renamed them too to make it easy. x8xt or x8pro
Printable View
the fact that the x800pro bios is a .bin and not a .rom doesnt make any diffrence?Quote:
Originally posted by Shroomalistic
exactly, i renamed them too to make it easy. x8xt or x8pro
Just make sure that when your typing in the flash command you put x800xt.rom not x800xt.bin.
k just wanted to make sure:toast:
okay. im on the x800pro.bin bios. back up to 510/571
11.6k 3dmark03 with quality driver settings. and my 3500+ at stock
http://service.futuremark.com/compare?2k3=2726655
going to do a 250x10 and 510/560 run of 3dmark01se to see where it falls then i'll try the xt bios.
do you still have your 16 pipelines enabled? You should and most likly do but im just wondering
ooh yeah, great to hear its working for ya.
yup 16 pipes still working. only glitch is now when i enter my motherboards bios, that america blah blah blah detecting screen. Its now bright pink instead of black LOL. i dunno if i'll be flashing to that xt bios tonite or not. will keep yall updated
and its aparently to hot to run 250x10 right now even tho its 2am. Im damn sick of runn'n this stock hsf but ive been assured my V5 and rads have been shipped out. Hopefully one XLR 120 rad will be enough to get my chip out to 250x11 min. Since im fairly sure that the other xlr120 rads going to be cooling a maze4 with a 80w pelt lol. This card WILL overclock or may god strike me dead! i may go for one of those new vga silencers first but its hard to say.
here's my 3500+ at 233x10 3-2-2-8(my 24/7 settings) and my modded x800pro at 507/560. crap car low.
http://service.futuremark.com/compare?2k1=7945909
for comparisons sake here's my 3500+ at 250x10 3-2-2-8 and my modded x800pro at 475/475
http://service.futuremark.com/compare?2k1=7945847
i should be in good shape for well over 30k once i get all my cooling sorted out.
Also could someone do me a favor who has a modded pro or a legit xt thats working perfectly at 520/560 with the stock cooler. Run find max core on ati tool with the overdrive tab from the drivers open. Im hitt'n 75c during ati tools heat up phase at 510/560. somehow i dont think its suppoed to get that high, ive heard that x800xtpe's only hit around 60c loaded. If thats the case i can narrow the cause of my problem to bad contact with the core on the hsf and can attack the stock goop with hope of solve'n the problem.
edit**
well it seems even tho there was a gastly amount of goop used i was gett'n very good contact. i poped off the hsf and cleaned that all away and slapped on some as5. Temps stayed the same. 510/560 stays at 75c full loaded loaded but will sit there forever it seems and not artifact a bit(left it sit for 15 minites and hassnt budged off 75c) but at 515/560 during a 50second heat up phase it will hit 74c and start artifacting as soon as it switches back over to scan. Those temps "should" drop a couple of C when the as5 settles in just like it would on a cpu. I would still like to see some 16 pipe cards at 520/560 temps while scanning for artifacts(puts same load as heat up phase or so it seems) to use as a refrence. I also flashed to that XT bios this morning and didnt gain a single mhz:confused: So im going to have to do a pencil mod to get anything more out of this beast(anyone got a guide for me?).
I wrote down my core number since i had everything off.
R420
215RADCGA11F
GB8832.1
0420AA
and ive got GC16 memory chips naturaly.
Help me plz !
I have a non-VIVO card. ( Coonect3D X800Pro with CG20 2.0 ns ram ) can i mod that, and with which bios ?
Same (+/- 2 degrees) at me ! But, as i posted yesterday (actually it was a question, that still remains unanswered), i`ve connected x800 fan (which has a label 12 V) to an external PSU (mobile phone charger @ 9 V) and managed to achieve 535 MHz core at same temp!Quote:
Originally posted by Mongoose420
Temps stayed the same. 510/560 stays at 75c full loaded loaded but will sit there forever it seems and not artifact a bit(left it sit for 15 minites and hassnt budged off 75c) but at 515/560 during a 50second heat up phase it will hit 74c and start artifacting as soon as it switches back over to scan. Those temps "should" drop a couple of C when the as5 settles in just like it would on a cpu. I would still like to see some 16 pipe cards at 520/560 temps while scanning for artifacts(puts same load as heat up phase or so it seems) to use as a refrence.
So there goes my Q once more: IS THERE STH WRONG WITH THE FAN ? Why doesn`t it spin faster as GPU achieves higher temp? Or is it only my problem?
Add my powercolor to the list.
Flashed it. Restarted windows. New hardware found. Said it was an X800XT Platinum Edition. Checked atitool. 16 pipes. default gpu 520/default mem 560. is that right?
Was that i VIVO or a non-VIVO ?Quote:
Originally posted by eddy
Add my powercolor to the list.
Flashed it. Restarted windows. New hardware found. Said it was an X800XT Platinum Edition. Checked atitool. 16 pipes. default gpu 520/default mem 560. is that right?
My X800Pro just spins at full speed for a few seconds at bootup. Then the fan remains at same speed any time. (My VPU core goes up to 74°C)Quote:
Originally posted by Ralfi78
So there goes my Q once more: IS THERE STH WRONG WITH THE FAN ? Why doesn`t it spin faster as GPU achieves higher temp? Or is it only my problem?
Oh, and Ralfi Welcome to the European Union! :)
allso VIVO ?
yes the vivo version of the powercolor card. there are 2 different versions of the power color x800pro card.
thx, Gruess Gott!Quote:
Originally posted by Goldlocke
My X800Pro just spins at full speed for a few seconds at bootup. Then the fan remains at same speed any time. (My VPU core goes up to 74°C)
Oh, and Ralfi Welcome to the European Union! :)
i`ve marked that already because of prices in stores ;)
Regarding the fan - i`ve measured vlevel (black and red wire) - until temp doesn`t achieve 70 degrees - it`s still 5,1 v, when temp exceeds 70 - voltage goes up to 6,3, above 80 degrees- 7,6v... no wonder that i couldn`t observe my fan spinning faster, as an increase 1,3 v is hard to "hear". I wonder how high temp would have to be to force PCB to give full 12 v ... I think it`s a bug (probably in BIOS), as at 82-84 degrees my card hangs, so fan should operate at higher speed earlier than at 70 deg.
Maybe some1 could fix it...
Regards
wow! your card hit 80+c? damn.
Also i found the pencil mod and removed the sticker so i could check my voltage. its at 1.32v. I'll prolly do that later and bump that up to 1.37~1.4 to see how she does then. only problem is i have never done a vmod before, pencil or otherwise. I guess just lay on 2 or 3 stroked of graphite, plug the card in with the hdd unplugged and check the volts real quick then lay on more or take off some to get to where ya want to be?
Also is the the default gpu voltage 1.3 or 1.4? there seems to be some confusion i guess according to another post. anyone confirm this?
No wonder this card didnt get badged as a XT.
crap forum
Read carefully all previous replys - there is sth bout non vivo, if i remember - no good news to u :(Quote:
Originally posted by KoGeR|Max
crap forum
there was one.. with a non vivo that made the mod, and it work... so i was just thinking... mabeQuote:
Originally posted by Ralfi78
Read carefully all previous replys - there is sth bout non vivo, if i remember - no good news to u :(
Did a 3d Mark 2001 run at 545/625 got 26K
http://service.futuremark.com/compare?2k1=7947199
in 3d Mark 03 I got 12.4k
http://service.futuremark.com/compare?2k3=2729287
woot. well a little bit o' graphite and boom 520/560 stable.
lowered resistance of the r1597 chip from 418 to 402 ohmz and got my voltage up from 1.32 to 1.35(didnt want to get to ambitios)
12.2k x800pro vivo to x800xt(with proper clocks:D ) and my 3500+ at stock
http://service.futuremark.com/compare?2k3=2729447
look about right?
looks good to me, specially with stock cpu.
damn this cursed thing. i cant run 3dmark01se. I can run nature by itself just fine. 260.9fps, but i crash in car low every damn time with my cpu at stock. It runs through 3dmark03 just perfectly fine, not a glitch to be seen anywhere.
any idea's?
okay this is really piss'n me off now. i rigged up my ghetto ass a/c duct and dropped my case temp down to 17c. idle temp at 520/560 is at 36c. Still cant complete 3dmark01se at 520/560.:mad:
is that on a fresh format?
ok. now thats just goddamn WIERD:stick:
aparently i cant overclock with ati tool without booting at those clocks. default of 525/573 lowered to 540/558 crash in car low, 475/478 profile clocked up to 520/558 crash in car low. set a 520/560 profile and set it as the 2d and 3d profile and 3dmark01se runs through without a hitch.
25.1k a64 3500+ x800pro modded to xt at xt clocks with a :banana: :banana: :banana: :banana:e car low(about 17fps low)
http://service.futuremark.com/compare?2k1=7947423
i did a fresh install when i got my card. so its 2 days old and ive got 2 games and 2 3dmark programs installed so far. and aparently that was a fluke. i tried to overclock my cpu to 250x10 thats a easy overclock with this a/c rigged up and the damn thing froze in 3dmark again. tried at 240x10 and 233x10 and again at 200x11 and they all froze.