:lol:Quote:
Originally Posted by TEDY
Not every stick was that great though... I know of some Mushkin 3500 LEs that only did 245 at 3.3... I do not really consider that top-notch :p:
Printable View
:lol:Quote:
Originally Posted by TEDY
Not every stick was that great though... I know of some Mushkin 3500 LEs that only did 245 at 3.3... I do not really consider that top-notch :p:
339wf 2x256mb Mushkin PC3500 LVl2 NF3 ultra DC 2-2-2-5-7-256-1T
3,7volt: Full Stable @ 269
3,9 volt sandrabenchable @281Mhz
damn i look so funny now with only 3.3vdimm :P
you sure do;)
up the vdimm on that ch5 and get some nice numbers of it i can add to the database :D
thx dude :)Quote:
Originally Posted by //mAr
what board was that on? nf2 nf3 875?
i wrote NF3 ultra DualchannelQuote:
Originally Posted by saaya
some 338wf khx3200k2 2x256 do on same rig 275 full stable @ 3,95 volt
my twinmos 2x512 315we do 247 @ 3,3 volt full stable.
if i knew doing vdimm mod :stick:Quote:
Originally Posted by saaya
thx a lot mar!!!! :toast:
and tedy, get a booster! :P
booster on dfi nf2 is a no go :>
Yep. Right... you must have to know how to solder ;)Quote:
Originally Posted by TEDY
But it's not that hard anyway :D
where do you live tedy? maybe somebody else can mod the board for you :)
I have a pair of corsair PC3200 C2 V1.1 which is a BH6 with a stepping of 302WE. Using DFI Lanparty B mobo with a 3.3vdimm can do 250fsb stable on prime95 for 24 hours. It is 24/7 setting for me. :D
Cheers.
slovenija LOL....
Oh :eek:Quote:
Originally Posted by TEDY
Quite a bit away... :(
just got my first BH-5 KHX3200/256
KHX3200/256
9905192-012.A01
1266690-2.6V
ASSY IN USA
230 CPC ON 2-2-2-11 3.1VDIMM so far 4 hours stable moved on
235 CPC ON 2-2-2-11 3.1vdimm so far 3:30 hours stable...w00t :toast:
240 CPC ON 2-2-2-11 3.2vdimm 2:30 hours stable + played FIFA 2005/NBA 2005 meanwhille WEEEEEEEEEEEEEEEEEEEE
i smell 250 :toast:
[ Kingston K ]
Memory Module Properties:
Module Name Kingston K
Serial Number 0123250Bh
Manufacture Date Week 28 / 2003
Module Size 256 MB (1 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC3200 (200 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Highest CAS Latency 2.0 (5.0 ns @ 200 MHz)
OMG it did boot 245 :D
245 cpc on 2-2-2-11 3.2vdimm
245*9 / 1.775vcore
w00t ...my personal record :=)
let see if it's stable for few hours...
KHX3200/512 A01
0328
KHX3200/512 A01
0329&0330
Both do 260 6-2-2-2 2t @ 3.4vdimm.
lithan seems we have similar bh-5 from outpost :>
yours all 2.6v assy in usa ?
both 256mb sticks? thx a lot! :toast:Quote:
Originally Posted by flyboi
cool! good luck man :) let me know when you hit the top and then post the results so i can add it to the database :)Quote:
Originally Posted by TEDY
what board was that on? thx a lot lithan! :toast:Quote:
Originally Posted by Lithan
oh, and what was the exact stepping? can you post the two letters after the week code? i suspect it was we , right?
Quote:
Originally Posted by saaya
yes, they are. :toast:
damn not stable even with
245*9 1.85vcore
3.3vdimm
what should i do ?
1.9vdd
1.8vagp
grrrrrrrrrrrr
i see you all have
XP-M 2500+ on LPB 6/19 at 250x10 1.85V
28.10.2004 11:38 Beginning a continuous self-test to check your computer.
Please read stress.txt. Choose Test/Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
Self-test 1024K passed!
Test 1, 4500 Lucas-Lehmer iterations of M17432577 using 896K FFT length.
Test 2, 4500 Lucas-Lehmer iterations of M17432575 using 896K FFT length.
Test 3, 4500 Lucas-Lehmer iterations of M17115073 using 896K FFT length.
Self-test 896K passed!
Test 1, 5300 Lucas-Lehmer iterations of M14942209 using 768K FFT length.
Test 2, 5300 Lucas-Lehmer iterations of M14942207 using 768K FFT length.
Test 3, 5300 Lucas-Lehmer iterations of M14155777 using 768K FFT length.
Self-test 768K passed!
Test 1, 6500 Lucas-Lehmer iterations of M12451841 using 640K FFT length.
Test 2, 6500 Lucas-Lehmer iterations of M12451839 using 640K FFT length.
Test 3, 6500 Lucas-Lehmer iterations of M12196481 using 640K FFT length.
Self-test 640K passed!
Test 1, 7800 Lucas-Lehmer iterations of M9961473 using 512K FFT length.
Test 2, 7800 Lucas-Lehmer iterations of M9961471 using 512K FFT length.
Test 3, 7800 Lucas-Lehmer iterations of M9837183 using 512K FFT length.
Self-test 512K passed!
Test 1, 9000 Lucas-Lehmer iterations of M8716289 using 448K FFT length.
Test 2, 9000 Lucas-Lehmer iterations of M8716287 using 448K FFT length.
Test 3, 9000 Lucas-Lehmer iterations of M8516289 using 448K FFT length.
FATAL ERROR: Resulting sum was 2127674967953864, expected: 2127675044649709
Hardware failure detected, consult stress.txt file.
Torture Test ran 1 hours, 47 minutes - 1 errors, 0 warnings.
Execution halted.
i don't get it....i hit FSB wall ?
Board is 8kda3j. Heatspreaders are on at the moment so I can't post stepping info. Next time I remove them I will write it down.
Tedy mine are from compuvest. 2.6v ASSY in usa.
Any my mistake its a 1024 dual kit, not two individual sticks. so its khx3200k2/1G
I have a week 12 (312we), Corsair cmx256A-pc3500C2pt (xms3502v1.1) 256mb (2 sticks)
Both Doing a 255 on 2-2-2-11 @ 3.34v
grrrr how on earth you guys get so high fsb with 3.3-3.4
i barerly get stable 240 :(
It's the board... mine does 272 at 3.56V, but I also need that for 260MHz :D Lowering the voltage renders my system unstable.Quote:
Originally Posted by TEDY
i really doubt it's board...hehe