I just don't get it, why is this not sold in EUROPE?
I just don't get it, why is this not sold in EUROPE?
I really can't understand why. Perhaps they will rebrand them and they will be sold in Europe as uber-overclockers memories (+€€€€€). :D
Mine are so near! Just 50 km! I want to receive them today and not monday :(.
LOL, they are here!
http://digilander.libero.it/m4puni/p...rst_try_1s.jpg
Not actually stable!
First stability test:
http://digilander.libero.it/m4puni/p...1780Mhz_1m.jpg
1.58V
Problems AMD?
http://i0.kym-cdn.com/photos/images/...jpg?1296494117
Punisher! Size of the images is quite small, hard to look at. You have bigger ones?
P/S: I mean images with CPU-Z screenshots :D
Ye (copy-paste into browser)
http://digilander.libero.it/m4puni/p...Mhz_1.6V_1.jpg
AMD guys, is my bandwitdh ok?
http://digilander.libero.it/m4puni/p...t_cachemem.png
nope, you gotta up your CPU-NB clock, to around 2650mhz-2750MHz 1,30vQuote:
Originally Posted by Punisher!
CPU\NB is already @2650Mhz+!
Quote:
Originally Posted by Barr3l Rid3r
Sandra seems ok to me:
http://digilander.libero.it/m4puni/p..._1780Mhz_1.jpg
Impressive for that kit.
they are no Hyper or PSC, but they look good for what they are. In line with bad BBSE :p:
Your Everest bandwidth is low for performance but looks in line with your timings.
Sandra bandwidth looks good too, I can pull about 18 GB/s with Hyper @ 1800 6-6-6 on X6.
I know you said 2133 10-10-10 was unstable, can you run 32M though?
Thanks for your reply. What about your Everest bandwidth?
Tomorrow I will try syntetic tests like 32M and get you in touch with them.
Quote:
Originally Posted by BeepBeep2
I have 565BE in my other machine...Quote:
Originally Posted by Punisher!
I've got two machines in the house:
1- signature machine with FX which can't be compared
2-
AMD Phenom II X2 565BE
ASUS M4A89TD Pro/USB3
ATI HD4850
4GB 1600 6-8-6 RipjawsX (PSC)
750GB Hitachi DeskStar
I'll swap my X6 out for the X2 in that PC and run some tests for you with PSC/Hyper.
Ok, thanks a lot mate.
Anyway these babies are low voltage but seems to like it over. To get total stability @890Mhz 8-8-8 they need 1.6V (from 1,35V!).
Quote:
Originally Posted by BeepBeep2
AMazon refunded me $24 to cover the fees so im gonna pick the kit up monday morning - assuming its still there anyway lol.
niiice
Hope so! I have high expectations of them :).
Have some mushkin blackline 10-11-10-28 1.5v 2133mhz to test this weekend to keep me busy (£60 2x4gb kit). G.Skill Ripjaw 2000mhz 9-10-9-28 1.55v kit is a no go for 1T and wont go lower than 9-11-10-30-2T in 16gb config.
I cant find those patriots in the UK unfortunately or i'd have given them a try instead of the mushkin. Not had mushkin ram since winbond BH6 days - blast from the past!
I should have a few kits to compare the Samsungs to if I ever get my hands on them anyway :lol:.
[EDIT : Dont want to spam in too many OT posts so... The Mushkin Blacklines are excellent. 9-11-9-27-1T @ 1.6375v/1.125v Prime stable (7000mb set, 720k min/max repetition). Highly recommended for £30 per stick.]
punisher: make some pics per favore :cool:
deleted the word ;)
Pics of what? Mate, that word is really offensive here.Quote:
Originally Posted by TEDY
See signature for daily.
Wow, I googled that...
Punisher, what does the kit do @ 9-9-9? I think you can get more bandwidth out at ~1950 9-9-9 than 1790 8-8-8.
The problem for 1950 9-9-9 is that I have to lower CPU (and CPU\NB too) frequency to 3700Mhz and bandwidth is then poor (already tried).
Divider @ 4Ghz are 2133Mhz or 1790Mhz!
2133Mhz is a no go (perhaps with more than 1,725V, max I have already tried, but I am not actually ready to put them @1,8V).
Quote:
Originally Posted by BeepBeep2
A strange thing I am noticing:
- sometimes, with low timings especially, I am almost Windows stable (I mean several minutes Prime95) but I get strange corruptions while in BIOS (also during post).
What could be the reasons of them?
that is mem...i have the same problem thats why i quit using them, seems well designed for X79 but hard for other chipsetsQuote:
Originally Posted by Punisher!
Nice to hear that mate. So I am not the only one. When are you having it? Randomly(/cold boot)? Tight timings? Lower(\higher) voltages?Quote:
Originally Posted by andressergio
Thanks.
Goodbye!
all the time i push them i guess its vtt, i tried more and went fine but i dont really want vtt over 1.12 as i use 1.08 and its more than enough for the patriotsQuote:
Originally Posted by Punisher!