Printable View
Quote:
Originally Posted by OC Nub
thank you sir.
have a coolit vantage cooler coming to replace the frio. The frio works great but cant get the 200mm side fan on with it and i want to push some air between the gpu's.
care to share some details on your settings for your 4.5Ghz 24/7?
Here 's my result. Not sure why this chips need a lot of juice??? L042A696 + watercool (F7a bios)
http://img13.imageshack.us/img13/5350/06test1.th.png
very nice wong what volts did you set in bios and with vdroop level one or two, i have noticed at 5.3 mine needs 1.52 plus level 2 vdroop, but 5.4 even with 1.62 plus vdroop level two it booted in once but wasn't stable my temps are similar to yours mine is watercool but i was scared of whacking any more volts in it at that but maybe mines like yours and just needs more , also did your have the cpu pll overvoltage on auto or enabledQuote:
Originally Posted by Wong[TH]
Definitely level 2 but vcore??? I 'll reply tomorrow as my system @ my office.:p:Quote:
Originally Posted by GLENBOY
These are the voltages I have been using for 4.5, all ref's set to auto, LLC1, and the bclk is raised to 1002 to make it read an even 4500mhz in windows.Quote:
Originally Posted by Kingleo
cheers mate yes i might have a go , and cross my fingers, i bet it 1.65 set in biosQuote:
Originally Posted by Wong[TH]
Sorry, you guessed it wrong, it's 1.64....:cool: and with this setting it's just can boot on 5601 with super pi 1MQuote:
Originally Posted by GLENBOY
http://img151.imageshack.us/img151/2...rpi5601.th.png
Uploaded with ImageShack.us
In a few days I'll post what i have running...
Just dumped Asus RampageIII & so far I'm real happy with UD7.
Wow just noticed bios has some bad bugs.
All the bioses released by Gaygay up till today are very slow
Im still stuck at 1866c7 ram with whatever bios never get it booted at 2133c8.
Getting one of these boards in next few days. Going to attempt my first raid array and wondering how you get the raid drivers out of the exe file from the gigabyte site. I have run the exe then gone looking but dont know which files I need, cant find a drivers folder(also tried uniextract winrar and). First time using raid sorry for the noobie question cheers.
Is anybody getting this with their UD7? Sometimes booting the board your RAM will revert back to 1333Mhz when set higher and the system says it has experienced a bad overclock? I find that annoying.
If your installing windows 7 you dont need any raid drivers to install the OS.Quote:
Originally Posted by bluc
Have you tried a different kit of ram? I havent had any issues with 2133 on 3 kits, Dominator gt's at 2133 8 8 8, HyperX at 2133 8 8 8, and Gskill pi's at 2133 7 10 7. Have only tested stability on the GSkill's, the other 2 kits just a few benches.Quote:
Originally Posted by owikh84
So using hardware raid windows 7 will detect it during installation?Quote:
Originally Posted by ProStreetCamaro
I hv DomGT 2000c7 and Patriot Sig5 2400c9Quote:
Originally Posted by OC Nub
I hv DomGT 2000c7 and Patriot Sig5 2400c9Quote:
Originally Posted by OC Nub
8 hours prime blend stable, 5ghz 1,344v
http://img39.imageshack.us/img39/374...lend8horas.jpg
Sorry not been paying attention I take it CPU-Z reads correct now on the UD7?Quote:
Originally Posted by Beatle
Very nice low low volt 4/8 5GHz there, thats got to be the best I've seen :up:
Version 1.56.2 of CPUZ yes.Quote:
Originally Posted by C-N
Thanks, strange it works on UD7 but not UD5.Quote:
Originally Posted by Beatle
I have tried 1.56.2 from a couple download locations but it don't work on my 5 where did you get your version of 1.56.2?
This forum but i don't remember the post.Quote:
Originally Posted by C-N
Edit:
Uploaded from my HDD
http://www.megaupload.com/?d=Y1SZ54JT
The CPUID website has a "Sandy Bridge Reviewer Kit" that includes it.Quote:
Originally Posted by C-N
http://www.cpuid.com/news/36-cpuid_r...dy_bridge.html
I have had the same experience with my Corsair GT 2133mhz 2 x 2gb running at 2133mhz. I assume the higher memory setting's and ram voltage ofQuote:
Originally Posted by Chrono Detector
1,65v is considered to be an overclock?
After a Bios problem or forced restart it revert's back to default of 1333 mhz.
assume a revised bios will ensure this problem does not occur anymore.
At this moment my processor is set at 4200mhz / ram 2133mhz, today Im
going to test some higher multiplyer settings.
:cool:
Thanks i'll give it a try later :up:Quote:
Originally Posted by Beatle
Ye got that but it no work, I heard tale of a special Gigabyte only version but all I have tried failed to read correctly.Quote:
Originally Posted by Forceman
New beta BIOS F7d is out.