[WIP]evil style tube clamps

Quote:

---

Originally Posted by Xilikon

:rofl:

Rice = bling :ROTF:

You can get a Feser DDC top, same thing as chrome spinner rims :up:

---

Rice is great if you're really hungry and want to eat two thousand of something.
-Mitch Hedberg

Yes 5/8th please, 7/16th is still one of the most common tubing choices in any case, however I think it because ? 5/8th when pushed over 1/2 inch barbs so you might want to keep it in mind or do some testing before you make a large run....

Decided to buy at least 22 of your black chrome clamps for 1/2 ID 3/4 OD tubing to my casemod o.o
I seriously hope, you get the production problems straighten out mate :)

Hmm.. I like the special gold version ones.. Think I could get laid alot if I WC'ed the GF's pc with those :p

Quote:

---

Originally Posted by RADCOM

So when are these available. The Gold looks nice enough to get engaged with lol

---

Just make sure you don't tighten it on the finger too much! I would hate to see that happen.

Quote:

---

Originally Posted by Xilikon

:rofl:

Rice = bling :ROTF:

You can get a Feser DDC top, same thing as chrome spinner rims :up:

---

no, rice = tasteless bling on little 4 bangers that wanna look "fast" or "cool" ;)

in the PC world, it is just bling ;)

Quote:

---

Originally Posted by SparkyJJO

no, rice = tasteless bling on little 4 bangers that wanna look "fast" or "cool" ;)

in the PC world, it is just bling ;)

---

Yeah, but some of those little 4 bangers are insanely fast.

Back on topic, those clamps look very nice.:up:

http://evil98.insanity-asylum.com/co...ubeclamp14.jpg
http://evil98.insanity-asylum.com/co...ubeclamp15.jpg

DD 1/2" fitting:
smallest OD .49"
largest OD .5625"
smallest OD w/ 3/4" Tygon R-3603 .7695"
largest OD w/ 3/4" Tygon R-3603 .7895"

DTek 1/2" fitting:
smallest OD .492"
largest OD .57"
smallest OD w/ 3/4" Tygon R-3603 .7755"
largest OD w/ 3/4" Tygon R-3603 .7955"

EK 1/2" fitting:
smallest OD .5"
largest OD .5465"
smallest OD w/ 3/4" Tygon R-3603 .??
largest OD w/ 3/4" Tygon R-3603 .77"

BP 1/2" fitting:
smallest OD .552"
largest OD .575"
smallest OD w/ 3/4" Tygon R-3603 .7865"
largest OD w/ 3/4" Tygon R-3603 .792"

-------

Hey guys guess what UPDATE

ok so these are the only fittings ive got, measurements arent super accurate but it helps me and might help you guys understand what im talking about.

In a list of easiest to hardest its;

EK, DD, DTek, BP

the BP fitting is nearly impossible to get around but it will. the ID of the clamp is less then .75" so it is a bit tricky to get it on the fitting but ill fix that.

as for the seal, i havent tested it in a loop yet but from what i can tell it is looking really good :up:

let me know what you guys think

Whoa, those actually look like real photos!
:p:

Quote:

---

Originally Posted by majestik

Whoa, those actually look like real photos!
:p:

---

really? i thought those were my worst yet :rofl:

HOLY CRAP no evil the bottom one looks real, ROFL.

ROFL... there real Iandh sent me the protos yesterday hhahah

Apart from the tubing cuts looking a little too clean, I actually thought that was real at first glance...

EDIT: Oh you're an ass. :/

i get criticized for renders and i get criticized for photos.. i never win ROFL

Can we say I want some? My wormdrives work great, but something a little nicer looking wouldn't hurt!

I have primarily Dtek and EK barbs in my system, two aquaextremes on my MCR320, so I should be good on fitment.

Maybe to early to ask, but pricing?

Quote:

---

Originally Posted by evil-98

i get criticized for renders and i get criticized for photos.. i never win ROFL

---

That's your fault buddy, probably shouldn't make your renders look like photos and your photos look like renders. :p::rofl:

Quote:

---

Originally Posted by Waterlogged

That's your fault buddy, probably shouldn't make your renders look like photos and your photos look like renders. :p::rofl:

---

lesson learned :shakes:

Quote:

---

Originally Posted by evil-98

ROFL... there real Iandh sent me the protos yesterday hhahah

---

:gay:

:rofl:

awesome work Evil - nice to see that it has been made:up:

Beautiful job Evil! :yepp:

Quote:

---

Originally Posted by Dangals

awesome work Evil - nice to see that it has been made:up:

---

Quote:

---

Originally Posted by Jor3lBR

Beautiful job Evil! :yepp:

---

finally some nice comments, thanks guys :up:

smexy...

Do want in green with black screws....

There is NO WAY that those are renders... they're just too real, they have to be photos...

EDIT: So after reading through the thread (great advice for anyone that doesn't want to make a fool of themselves) I see they are. Nice try evil...







...smartass :p:. You had me questioning myself for a second ;)

Oh, nice job by the way, very sexy (never thought I would hear myself say that about aluminium tubing clamps)

I don't use this one often but

lol

Quote:

---

Originally Posted by .Logic

There is NO WAY that those are renders... they're just too real, they have to be photos...

EDIT: So after reading through the thread (great advice for anyone that doesn't want to make a fool of themselves) I see they are. Nice try evil...







...smartass :p:. You had me questioning myself for a second ;)

---

:spill:

^^^ I almost did that quite literally with a glass of milk. :rofl:

Logic, those are pictures. We just like giving evil a hard time about it.

evil, very nice bud :up: If I used barbed fittings, I'd certainly look into getting a bunch but, unfortunately I don't.