To run my Team Xtreem PC2-9600 I needed:
5-5-5-15-4-30 at 1201MHz
vDimm: 2.27v (2.22 actual)
vNB: 1.45v
I was stable with Orthos Blend. It ran really well.
Printable View
To run my Team Xtreem PC2-9600 I needed:
5-5-5-15-4-30 at 1201MHz
vDimm: 2.27v (2.22 actual)
vNB: 1.45v
I was stable with Orthos Blend. It ran really well.
Hmm thats weird the Tracers now won't boot with the latest 812 BIOS on my P45 DK T2RS, my other Cellshock 1000C4 kit is fine though
Is that with the E8400@500x8 and the memory on the 333/800 strap?Quote:
Originally Posted by doakh
Yes, you got it! I might just sell them.Quote:
Originally Posted by Shiranui Gen-An
I wonder if something isn't wrong with my DFI P35, sometimes with 2x1GB installed in the green slots it will only detect 1024MB single channel; haven't seen that phenomenon with the yellow slots but they can't clock worth a darn. And it seems to be ridiculously picky about the sticks it will clock to 600+; kits that have no issues doing so on my Asus boards give it fits.
no problem here... Team XtreemŽ DDR2-9600 2x 1Gb D9GKX TXDD2048M1200HC5DCQuote:
Originally Posted by Shiranui Gen-An
http://i116.photobucket.com/albums/o...t433MHz2GB.jpg
sorry it's an old file... i don't have my P35 anymore
Team and my Reapers use Kunyu PCBs, the Ballistix use Levin...Maybe my DFI doesn't like BrainPower? :confused:
The DFI P35 T2RS board I tried for 1 day or two didn't like neither my Team Xtreem D9GMH or Cellshock D9GKX and D9GMH kit. Seems to be hard to find good overclocking ram for this board.
ya...but maybe it too has something to do with DFI's RAM slots?:shrug:Quote:
Originally Posted by RPGWiZaRD
I got my replacement Team Xtreem 9600 kit earlier this week, have tried to push it to 1300 but haven't gotten it to pass Memtest x86 so far. At any rate, I don't need anywhere near the rated voltage for it to be stable at 600MHz CAS5, running with about 2.13V real on my Rampage'd Maximus Formula. Something interesting to note is the week/year info in the SPD, who knew there was still any GKX around as late as 1Q 2008?
Just wondering, for those who managed to get high clocks on the DFI P35 boards, did you have to adjust DRAM CLK delay any? Or did you leave everything on Auto, including enhance data transmitting and enhance addressing?
I run 24/7 at 500x8 and I have :Quote:
Originally Posted by Shiranui Gen-An
Enhance Data Transmitting: Fast
Enhance Addressing: Fast
T2 Dispatch: Auto
Ch1 & Ch2 Clock Crossing: More Aggressive
Then I make my memory stable , but some non Micron memory will need to be on auto to be stable.
its not the slots its the biosQuote:
Originally Posted by emoners
I just won this a auction for pc2-5300 Crucial Ballistix
Part#BL12864AA663.16FD2
Batch#CL1121NTM
3-3-3-12 2.2v
Anyone know if these are D9 chips??
Yeah, that is D9GMH.Quote:
Originally Posted by chad
Thank you very much:)Quote:
Originally Posted by MACMAC
Hmm updated to 1003 BIOS, I wonder if my Ballistix will boot now