New Block from Bitspower

Printable View

Show 100 post(s) from this thread on one page

09-30-2008, 06:26 PM
zlojack

Quote:

Originally Posted by RickCain

Actually what ends up happening is the product everyone is waiting to water cool is obsolete before these custom blocks are available.

That can be an issue, though I've noticed that the layout of even the new X58 board is pretty similar. I'm hoping my EK blocks will still be useable if I ever decide to go for one of those.
09-30-2008, 08:53 PM
Waterlogged

Quote:

Originally Posted by NaeKuh

uhh... read my top comment WL. :\

Im dayam patient, but the lag on these parts in the US is almost on par as OCZ promising hydro-z. :X

Vincent i dont want to sound mean or rude, i just desperately need that block.
And at this point, im even calculating if a custom builder could make me my old design faster.

Well NaeKuh, as I stated before, things get thrown off schedule when an unforeseen problem, such as the "broken" rotaries, arise. Fixing the problem instantly becomes your first priority and other things take a back seat. If I had a dollar for all the times I had to re-setup (after taking that setup off only a few days before) a machine to fix someone else's mistake, I'd have quite a bit of cash. Now, I know there is very little chance of these blocks being run on the same machines but, it's pretty much the same thing as your attention gets distracted from what your supposed to be doing to fixing what was already done. When you finally get back to what your supposed to be doing, you get a little gun shy and take a bit longer making sure everything is right the first time. Then things start to flow like they should again and guess what?.....another screwup. It's almost as predictable as Old Faithful. :ROTF:
10-01-2008, 08:59 AM
BP-Vincent

Quote:

Originally Posted by slim142

I thought you said BP was shipping the blocks this week and they were going to be ready FOR SALE next week...

Here we have customer's oders already for those blocks..

But they not only order blocks but others items...We need to ship together with whole order out...

From the list I have on my hand now..next week will have all the blocks out...

Sorry for the long delay...

Quote:

Originally Posted by Waterlogged

Did you guys ever stop to think that with the rotary mess that the schedule got a tad screwed up? GEEZ, freakin' crack addicts. :rolleyes::shakes:

Vincent, might I suggest that you no longer give ETA's on the products to save yourself some of this unnecessary harassment.

We are all doing all the new projects and solving the issue of our rotary models...

I have rejected those products twice time..because the quality was not what I need.....but now all can be closed to...and we will improve step by step.

When our production flow was ready...all new products will come out under control...

Quote:

Originally Posted by NaeKuh

vincent i hate to bother you with this question,

but its been almost a month and no supply in the US.

Can you be frank with us, whats going on? And when will the US expect to have these in stock?

My project is held 1 month waiting for the 780i blocks, and honestly, its taking too long that i just went the DD route as a temp.

But we need an approx ETA. Cuz the guys in US have been waiting a very long time. :[

uhh... read my top comment WL. :\

Im dayam patient, but the lag on these parts in the US is almost on par as OCZ promising hydro-z. :X

Vincent i dont want to sound mean or rude, i just desperately need that block.
And at this point, im even calculating if a custom builder could make me my old design faster.

Well thats not the only thing. As i said, i decided not to have my block fabricated because BP was coming out with them. I thought i could just wait and ride it out.

However.... Look at the creation date, and then the last post. We been waiting a very long time. :P

Once again vincent i dont mean any rudeness, im just trying to meet deadlines.

Please read my reply above...Just need to make sure the first one can be fit my expect and then we can ship out those to all of our customers.

I am very sorry for those blocks be delayed long time..
10-01-2008, 09:52 AM
arnemetis

Hmm. So you ship out Monday, shops get them by end of week, and I can buy on the 13th? (I can dream, can't I?) I can't wait much longer than that, need to install my water cooling in two weeks! Keep up the good work Vincent, and here's hoping no more problems!
10-01-2008, 10:58 AM
skinnee

Thanks for keeping us up to date on the progress Vincent, much appreciated! :up:
10-01-2008, 11:14 AM
NaeKuh

yeah thanks vincent,

once again i dont want to sound rude, so please dont take offense to anything ive said. :up:
10-01-2008, 11:27 AM
slim142

Quote:

Originally Posted by RickCain

Actually what ends up happening is the product everyone is waiting to water cool is obsolete before these custom blocks are available.

Well, when you make a good investment, there is no such thing (at least for a good time).
There is no way Im replacing my Striker II specially when Nehalem proves not to be worth at this time (at least 45nm gen)

Omg, dont tell me Im going to have to delay my project one week! Im so sad rigth now...
10-01-2008, 12:41 PM
shabranigdo

Probably too early to ask this but, EVGA just put out the new 790 FTW digital board (132-YW-E180-A1) and I am wondering if the NB/SB block will fit it? Also it looks like only one mosfet bank on the 790 digital vs 2 on the other boards. Will your current mosfet block fit this board too?
10-01-2008, 06:15 PM
funny

very nice design~ :)
10-01-2008, 06:22 PM
Waterlogged

Vincent, it's good to hear your trying to juggle everything all at once to keep the schedule, prior experience has taught me it's not always the best way to handle it. Hope you don't have any more unfortunate set backs. :up:
10-01-2008, 06:25 PM
zlojack

Good to hear there are some advances.

Looking forward to the rotaries shipping soon! :up:
10-02-2008, 12:54 AM
BP-Vincent

1 Attachment(s)

Quote:

Originally Posted by shabranigdo

Probably too early to ask this but, EVGA just put out the new 790 FTW digital board (132-YW-E180-A1) and I am wondering if the NB/SB block will fit it? Also it looks like only one mosfet bank on the 790 digital vs 2 on the other boards. Will your current mosfet block fit this board too?

If the layout and components are the same with before...We have ready the MOS in digital one...and available at the same time...

It's Black Freezer MOS N79DP.
10-02-2008, 01:21 AM
SaiNRuB

Quote:

Originally Posted by BP-Vincent

If the layout and components are the same with before...We have ready the MOS in digital one...and available at the same time...

It's Black Freezer MOS N79DP.

Very nice, i didnt even know of that board till like 4 days ago.
10-02-2008, 02:48 AM
septim

hmm maybe a good ddr memory water cooler is in order too...
10-02-2008, 11:06 AM
century child

Hi Vincent. Glad to see these blocks coming to market. Can you tell me if they will be available in Germany and, if so, where? The few places that carry bitspower stuff that I have found here have very little and no blocks or fittings at all.
10-02-2008, 11:39 AM
LeeH

Quote:

Originally Posted by slim142

Well, when you make a good investment, there is no such thing (at least for a good time).
There is no way Im replacing my Striker II specially when Nehalem proves not to be worth at this time (at least 45nm gen)

Omg, dont tell me Im going to have to delay my project one week! Im so sad rigth now...

These delays have put me in extreme danger,.

I have had my loop running on a large square coffee table in the living room for several weeks now. My wife is threatening to do unspeakable things to me with the radiator. :eek:
10-02-2008, 12:38 PM
foolio

Quote:

Originally Posted by LeeH

My wife is threatening to do unspeakable things to me with the radiator. :eek:

I am getting worried. Radiators hurt like hell, maybe wear a helmet inside :rofl:

Ok ontopic again:
Hope ya fix the delay vincent i also can not wait till i see some stuff at my supplier. The stuff u guys make just rocks imo.
10-02-2008, 01:52 PM
slim142

Quote:

Originally Posted by LeeH

These delays have put me in extreme danger,.

I have had my loop running on a large square coffee table in the living room for several weeks now. My wife is threatening to do unspeakable things to me with the radiator. :eek:

Like foolio said, I would be wearing a helmet right now. You never know whats going to happen while you are concentrating typing an answer...
10-02-2008, 01:55 PM
LeeH

Quote:

Originally Posted by slim142

Like foolio said, I would be wearing a helmet right now. You never know whats going to happen while you are concentrating typing an answer...

It's not that end of my body I am worried about:p:
10-02-2008, 03:14 PM
slim142

Quote:

Originally Posted by LeeH

It's not that end of my body I am worried about:p:

Well in that case, I would find cover RIGHT NOW! :rofl::ROTF::rofl::ROTF:
10-06-2008, 08:00 AM
arnemetis

So Vincent, any update? :D I hope things are going according to plan and you are shipping the blocks out this week, please let us know!
10-06-2008, 12:56 PM
slim142

Yeah
Because of something that happened, I will delay my wc project 1 more week, but I wont delay it anymore! I hope the block is out by then...
10-06-2008, 07:21 PM
dengyong

Quote:

Originally Posted by slim142

Yeah
Because of something that happened, I will delay my wc project 1 more week, but I wont delay it anymore! I hope the block is out by then...

I still say vaporware.
10-06-2008, 07:26 PM
Kayin

I have learned it's never safe to say vaporware.

Vincent is quite the manufacturer, I think he will pull it off.

He does some things that I have thought of, some things I wished I had thought of, and some things I never would have thought of. I can't say I've ever had to say all of those things about a manufacturer before. He's A+ in my book. Just wish some prices would go down, or a few sponsorships would walk my way.

Amazing work you do. Keep it up.

Show 100 post(s) from this thread on one page