- Nah, tCL5 is the working title for DDR2. ^_^Quote:
Originally Posted by maxine
- Nah, tCL5 is the working title for DDR2. ^_^Quote:
Originally Posted by maxine
I've got some 2x1GB Diablo kit with GTS, and some of the new CEC 1600 kits with somekind of Samsung (HF9H if i remember)
so i will write some oc reports asap :)
D9GTS?
Yeaa for sure,
Does anybody know if this Diablo will do 1800Mhz 6-6-6-18 2T with 1.90vdimm on a 790i?
If not, whats the best that it would be able to run with 1.90v?
:shocked: GTS on 2 x 1GB kit , damned , did CSX changed their chips on retail kit too or is it just a sample one ?Quote:
Originally Posted by Achill3uS
18000 6-6-6 @ 1.90v haha if you will find a kit wich could do this tell me :DQuote:
Originally Posted by slim142
1.9v in cas6? around 1600 i think, but only 2x1GB GTR or GTS from Diablos...
no its retail, GTR is out of, so new 2x1 kits has GTS now :)Quote:
Originally Posted by tomati
yesterday tested a bit with it on P45 (P5Q3) and it goes really well...
1800 7-6-5-18 1.96v memtest stable
Great news,Quote:
Originally Posted by Achill3uS
you have a MP
Sounds interesting about the gts kit Bala, will look forward to see more numbers
Keep pushing it
Yes, my kit is also equiped with GTS chips.
What was I thinking? :rolleyes:Quote:
Originally Posted by Achill3uS
As long as I get more than 12k on Everest Reading with no more than 1.90 I would be happy.
Does anybody know if this are coming any time to US? I had a phone number but the person does not answer :confused:
Ordered 2x1GB kit, i hope they will be good with this Rampage Extreme, the results i see here make me drool. :)
Mine are dying on a Rampage Extreme. They did 2000+ MemTest86+ 10 passes when I got them, now they hardly hold up at 1800..
2nd pair for RMA..
Uh? :(Quote:
Originally Posted by rabor
At what voltage?
Well all the ROG Motherboards are known to be overvolting the RAM, so if u put in 1.90 in BIOS, it really is 1.96. Just imagine if you think you are running your RAM at 2.00....
I ran 'em under factory-specs (2.125V) at 1.98V max 24/7.
The Striker II Extreme overvolted .04 to .05V, the Rampage X doesn't.., it's spot on.
That's what i thought, both the LCD poster and Asus Probe show about the same what i set in bios.
Didn't measure with DMM though,maybe someone can point me to the measure point for Vdimm?
Rabor, did you have active cooling over them?
Well, I know for sure I will put fans on top of them (OCZ RAM Fan)
Also, I will run them no higher than 1.90 (1.84 in BIOS)
This pair is expensive, and we all hate RMAs
I got new, 2GB Diablo3-2000Mhz kit (Micron D9GTS) from CSX.
Thank you Compustocx!;)
This new kit very powerful..:up:
2100Mhz 7-6-6-18 1T 2,262v , screenshot.
http://img352.imageshack.us/img352/2...1t2262vzg3.jpg
2000Mhz 7-6-6-18 1T 2,183-2,196v, SPi 8M
http://img155.imageshack.us/img155/9...2196v8mgr1.jpg
Fantastic result man, can you do 32M 2000 7-6-6 too?
Rampage Extreme and this mem seems 2B the perfect combo! :up:
Hi,
OMG these D9GTS kit are awesome, they seems to be the only one that can bench at 2000 cas7 :slobber:
Tried first some stability on my D9GTR kit
My best so far: 1828 @ 2.1v 7-6-6-18-1T
http://pix.nofrag.com/7/a/1/1bdf5120...d1b2e938tt.jpg
Stability at spec settings was fine too
1828 @ 1.9v 8-7-6-15-1T
http://pix.nofrag.com/b/3/b/6a4e7157...e4721b8att.jpg
2000 @ 2.1v 8-7-6-19-1T worked too
But max cas 7 was a bit disappointed, only 1010 for my best stick ( 1003 for the other one) [7-6-6-15-1T with 2.2v] and not benchable :(
Tested on P5E3 Premium.
its also depending on your board tomati, you need a good board to bench 1g+ cl7
but ya the sticks are amazing
I got my 2 x 1G kit today too ( Diablo 2000 ), but they are with D9GTR :(.
Will test them later.
doesn't mean they are bad m3kk ;)
Try 7-6-5-18 not 7-6-5-15 at 2GHz+. These IC's doesn't like very low TRAS at high speeds. And yes, good board and lots of voltage for MCH is a must for 2GHz cl7.