Project: Cosmos-S-Trail

Is this the same elbow fitting that you used?
http://www.frozencpu.com/products/54...tl=g30c101s746

And if so, I guess all your fittings and tubes are 1/2in and this fitting is the only 1/4in to 1/2 in. Does that constrict the flow at all? I need one but was hoping to find one that was 1/2in to match the rest of my fittings......


Also, where can I find those double threaded fittings you have? (red circles)
http://img301.imageshack.us/img301/536/mlmlen4.png

Quote:

---

Originally Posted by IcepiK

Is this the same elbow fitting that you used?
http://www.frozencpu.com/products/54...tl=g30c101s746

And if so, I guess all your fittings and tubes are 1/2in and this fitting is the only 1/4in to 1/2 in. Does that constrict the flow at all? I need one but was hoping to find one that was 1/2in to match the rest of my fittings......

---

That is a delrin 90 at the bottom of the second gx2 block, yes. It will work with all G1/4 fittings.

The G1/4 is the thread, not the ID or OD of the whole, you're getting thread and ID/OD confused.

OK, what about those brass colored double threaded fittings, I need one of those. Can't find them

How did you paint this part? Powdercoat or spray paint..? Sorry, I'm full of questions, I just love how your build is going....and I'll be starting mine soon

Quote:

---

Originally Posted by coolmiester

http://www.coolercases.co.uk/skull/skull_12.jpg

---

did you make that ram cooler by chance, or did you buy it? i'm sorry if i missed a link somewhere

Quote:

---

Originally Posted by skinnee

That is a delrin 90 at the bottom of the second gx2 block, yes. It will work with all G1/4 fittings.

The G1/4 is the thread, not the ID or OD of the whole, you're getting thread and ID/OD confused.

---

Well put skinnee, thanks :up:

Quote:

---

Originally Posted by IcepiK

OK, what about those brass colored double threaded fittings, I need one of those. Can't find them

---

Male to Male G 1/4 BSPP Nipple

Quote:

---

Originally Posted by IcepiK

How did you paint this part? Powdercoat or spray paint..? Sorry, I'm full of questions, I just love how your build is going....and I'll be starting mine soon

---

That part of the case is plastic so can't be powder coated (well not recommended as powder needs to be oven cured) so its painted along with the plastic side bezel mount things.

The silver bits are polished steel - not recommended unless you got a lot of patience.

Quote:

---

Originally Posted by just a noob

did you make that ram cooler by chance, or did you buy it? i'm sorry if i missed a link somewhere

---

Its a MIP's RAM Freezer 4 modded to fit FB DIMS from earlier in the log :up:

Quote:

---

Originally Posted by coolmiester

Well put skinnee, thanks :up:

---

No problem...I will accept payment in the form of mentoring me on tubing like you did for this build. :D

Nice work Dude

But did you not mount the top handle in reverse ?

Quote:

---

Originally Posted by skinnee

No problem...I will accept payment in the form of mentoring me on tubing like you did for this build. :D

---

For sure, no worries :up:

Quote:

---

Originally Posted by Fumle

Nice work Dude

But did you not mount the top handle in reverse ?

---

I did, well spotted. I do it with all my Cosmos as i personally think it looks better and makes the case look like its going forward rather than in reverse :D

Petras also carries the male\male fitting

http://www.petrastechshop.com/dadenmatomag.html

Quote:

---

Originally Posted by coolmiester

I did, well spotted. I do it with all my Cosmos as i personally think it looks better and makes the case look like its going forward rather than in reverse :D

---

I dont :)

I think it looks weird because the holes in the back are larger then the front ones

"my way" looks better :)
http://momskarrusel.dk/pics/DSC00276.JPG

Just saw this case in the flesh at i34 (UK LAN tournament) and WOW. Finish is increddible and the routing of the wiring/tubing is very neat. Thumbs up!

Great Stuff ,
Now what about you show us some Benchies \ OC ????
I would like to see the Temps in this amazing Case !

Very nice build. Absolutely love the outcome :up::clap:

Quote:

---

Originally Posted by Fumle

I dont :)

I think it looks weird because the holes in the back are larger then the front ones

"my way" looks better :)
http://momskarrusel.dk/pics/DSC00276.JPG

---

Yeah you're right, your way looks better.

Quote:

---

Originally Posted by Extigy

Just saw this case in the flesh at i34 (UK LAN tournament) and WOW. Finish is increddible and the routing of the wiring/tubing is very neat. Thumbs up!

---

Cheers, you should of stopped by and said hi :yepp:

Quote:

---

Originally Posted by lior307

Great Stuff ,
Now what about you show us some Benchies \ OC ????
I would like to see the Temps in this amazing Case !

---

Now that the show is over we'll be working on that side of things once the case gets back ;)

Quote:

---

Originally Posted by Chris1985

Very nice build. Absolutely love the outcome :up::clap:

---

Thanks for the support :up:

It was also nice to see banners with my Cosmos SLR mod on and finally some random pictures from Multiplay i34....

http://www.coolercases.co.uk/i34/i34_30.jpg

http://www.coolercases.co.uk/i34/i34_31.jpg

http://www.coolercases.co.uk/i34/i34_32.jpg

http://www.coolercases.co.uk/i34/i34_1.jpg

http://www.coolercases.co.uk/i34/i34_2.jpg

http://www.coolercases.co.uk/i34/i34_7.jpg

http://www.coolercases.co.uk/i34/i34_8.jpg

http://www.coolercases.co.uk/i34/i34_9.jpg

http://www.coolercases.co.uk/i34/i34_10.jpg

3 of the pics no workey...

Even the CM chick knows which one is the best. ;)

I'd love to 'mod' that booth babe! :eek:

CM yours is by far the best one there no doubt! nice work!!!

I'd love to find out how he made those top bars on the red case, Is that red acrylic? do they light up? :up:


coolmiester , you have any pics with that LCD screen on? I havent seen any yet..

Just to conclude the mod.

Thanks again for all the feedback, its had nothing but high praise from start to finish which really made it all worth while and hopefully i'll have something similar in the pipeline pretty soon ;)

Thanks again and heres a few of the final pictures (lots of them btw) with the black quick release buttons....

http://www.coolercases.co.uk/skull/skull_2200.jpg

http://www.coolercases.co.uk/skull/skull_2210.jpg

http://www.coolercases.co.uk/skull/skull_2230.jpg

http://www.coolercases.co.uk/skull/skull_2250.jpg

http://www.coolercases.co.uk/skull/skull_2260.jpg

http://www.coolercases.co.uk/skull/skull_2270.jpg

http://www.coolercases.co.uk/skull/skull_2280.jpg

http://www.coolercases.co.uk/skull/skull_2290.jpg

http://www.coolercases.co.uk/skull/skull_2310.jpg

http://www.coolercases.co.uk/skull/skull_2320.jpg

http://www.coolercases.co.uk/skull/skull_2340.jpg

http://www.coolercases.co.uk/skull/skull_2360.jpg

http://www.coolercases.co.uk/skull/skull_2370.jpg

http://www.coolercases.co.uk/skull/skull_2380.jpg

http://www.coolercases.co.uk/skull/skull_2390.jpg

http://www.coolercases.co.uk/skull/skull_2400.jpg

do you have those vents on both sides of the case? and if you do is one upside down, or are there both left and right side vents?

Lol @ the Mercedes SLR case... i would be ashamed going to lan parties with that.

Ur case on the other hand... its a beauty!

The SLR is his case too BTW :P

Is the 4" TFT broken? I havent seen a pic with it working yet...:shrug:
http://img352.imageshack.us/img352/3...013b47euz9.jpg

Quote:

---

Originally Posted by Pipi

The SLR is his case too BTW :P

---

Ooops :p:

Well, still wont change my mind.