Thanks. :)
Printable View
Thanks. :)
here is my contribution to this thread with my crappy win installation..
http://i54.photobucket.com/albums/g1...ing/10x398.png
here's mine. not impressive though. :(
It is a fine line (or just a mhz or so) to the next level in iterations.
DDR3 is cheating. :cussing:
bob can you plz rerun at <4001MHz? Some didn't want the CPU speed to be higher.
Final numbers with Allendale @ 4GHz [CPU under DI for that FSB, 2,9VDimm etc]
E4400 444.3x9=3999MHz, RAM 2:3 = 666.5 5-4-4-4
Allendale loves memory frequency so the difference between 500x8 1:1 [1066 strap] is not that small :).
13.688s
http://img338.imageshack.us/img338/4...688sga3.th.jpg
12.625 (result made with only 1GB RAM, Valid little upper)
http://img214.imageshack.us/img214/5...lat4g1mnd8.jpg
More Cas 5 with 4:5
http://img237.imageshack.us/img237/4726/12515mm6.jpg
here is mine, not as good as one of you, but I wanna to improve myself:
http://bp1.blogger.com/_hdbv8BLWrl4/...19.08.2007.JPG
and I would be happy about some comments or advices.
With my news P5K-E
http://img404.imageshack.us/img404/4...48440gpjr1.jpg
:)
P5K
E6850
2x1gig 10th Anniversary sticks (4:5)
Corsair HX620W
My sticks can do 1M CL5 @ 655MHz with 2,33V, with 2,37V they do ~665, but higher voltage doesn't help. I tried upping the NB and FSB termination voltage but that didn't make any difference :(. Any tips?
Anyways I did some quick SuperPI testing on Server 2k3 and here's my result so far:
Attachment 64842
Forgot to switch to mem tab in one CPU-Z :down:
Btw I also had a 12.500 run with some improved timings but it froze before I got to save the screenshot. I tried the same timings again but can't get under 12.515 :(
New run by Team Serbia :) :
http://img169.imageshack.us/img169/3...012500snd1.png
ASUS P5KE3 DLX X38
OCZ DDR3 2x1Gb 1600MHz 7-6-6-24 (micron Z9)
Win sever 2003 :)
12.50 sec
Mine:)
DDR2 is still alive :) :
http://img469.imageshack.us/img469/1...4000mhzxm6.png
Nice :clap:
You really must share some..at least some minor details ;)
http://img104.imageshack.us/img104/9486/pibs7.png
Needs some improvement I think, I have 12.593 @ 4002MHz.
Very very nice job Misko! :clap:
Bout time someone flexed P35's muscle.
looks good so far
this board will be replaced with a quicker X38 one soon :) so look out for some really low 12.xx :)
12.468s :)
http://img409.imageshack.us/img409/6...mhz7651qn5.png
32M SuperPi was ok but i know it can be better still
11m 43.328s :up:
http://img155.imageshack.us/img155/4...4mhz765dh3.png