Putting Idle Cycle Limit to 16 on your RAM will most likely allow you to run the RAM a few MHz higher. ;)
Putting Idle Cycle Limit to 16 on your RAM will most likely allow you to run the RAM a few MHz higher. ;)
Just another lucky guy. That's some insane 3700 you got.
Think you're able to do 4ghz+ ?
congrats and happy hunting. ;)
no... 3821mhz is the absolutly maximum of this chip! :( :)
The OP's right - No way, no how, not a chance that you'd be able to run a sub-20min 32m @ ~3600mhz ;) . I think you guys may be forgetting that Spi doesn't scale linearly with cpu clocks. For comparison's sake, here's a 32m run similar to Gianni's run....Quote:
Originally Posted by massman
http://www.cryo-laboratory.com/uploa...x27032m%21.jpg
..and here's another run.....
http://img163.imageshack.us/img163/4...x26232mxq5.jpg
IMO, this 32m was as close to perfection as ANY 32m I'd had ever run (and that includes my 19.xx minute runs using my Opty) and even then I couldn't break the 20 minute barrier....
@ Gianni: WONDERFUL cpu you've got there :clap: These types of cpu's only existed in my dreams back when I was benching :toast:
Now there's one good SD 3700+.
Happy Hunting for a better one ( i think you couldn't find a better one :D).
Keep up the benching :D
That could be the reason why I'm wrong about the sub20. My first run was 30min with 2.85GHz. Later that day I got 27m30s with 2.7Ghz, just by installing win2k3.Quote:
Originally Posted by s7e9h3n
Wouldn't it be possible to go sub20 (as you got pretty close) with 2*512MB and a little higher cpu clock?
Sub 20 will be very hard, it looks like gianni can´t do that :(
But he need some more good ram to get near the 20 min...
yapp my 2x512mb ram suxx @ 32M.... but i doesn't find no more good ddr1-ram in switzerland :(
Check Here.....Quote:
Originally Posted by massman
This listing contains the top 32m times reported from an individual user (to the best of my knowledge, it's about as complete as you'd find anywhere). Scroll down to ~#30 as that's where the AMD times begin....DAMN CORE TECHNOLOGY :D ! As you'll see, there's only about 12 people that have EVER run sub20 minutes using an AMD rig. In addition to that, you should discount any runs done without SPi v1.4mod or above since those other versions tend to run faster. Now you're basically left with 10 sub20 results. Out of those 10, only ONE was done @ <3700mhz (an incredible run by MickeyMouse). So in short: NO :p: If you think about it, it's actually quite amazing just how much more resources a sub20 minute 32m run requires.......
Steven, looking at it like that you might be right.
No doubt he could improve on that time though, 20 min 25 seconds is definately on the cards at that speed.
i'll try the sub20min with my new fx and ln2 ;) and hopefully better ram...
Absolutely right, BUT ... all the 32M runs that went sub20 were fx-57, except your insane 154, so there isn't any entry that ran above 300HTT. Now if you look a bit further, you'll find Bachus' run with a 3590 opteron 146:Quote:
Originally Posted by s7e9h3n
http://www.clockmehigh.com/cooler/sc...DDR512_32M.png
Look at his settings: 300+ HTT, not really supertight subtimings and only 3590MHz.
I know 50s is A LOT, but if gianni can get his hands on a 2x512 kit like yours (Read preamble 3.0, Max async Latency 6.0 :slobber: ) and use 362x10 with the 150 divider he should be pretty close.
hehe right now i found a 2x512mb mushkin kit in switzerland... 269mhz@3.4V superpi-stable... the same ram runs in the system of an other member @288mhz@3.8V.... :D
Gianni, I almost have my hands on a KAB1E 0614DPAW, do you think it will be similar? I only have air, but if the temps get a little better over here (meaning lower :briggin:) then I could move her up into the attic and have some 0C ambient temp runs.
Man, that thing is awesome you have there!
this stepping ist deffently not so good as mine!
check: http://www.forumdeluxx.de/forum/showthread.php?t=225074
i think it's the biggest prime-thread of sandiegos in the world
Yep, the cold bug prevented any of us to run 32m anywhere near 300HTT. If I had access to multis above x14 on my Opty, I would have easily been able to run 32m @ 3800+ Mhz. :(Quote:
Originally Posted by massman
Re: Bachus' run.....although his subtimings APPEAR to be loose, he more than makes up for them by running TRTW1 ;)
hey, long time no see, s7e9h3n :)
@ gianni, wait until I get this guy, I will OC the holy smokes out of it, with or without IHS :)
words are silver, mhz are gold! ;)
That should do the trick ;)Quote:
Originally Posted by gianni-gt
an other WR from france is history... the 3700+ with Toledo-Core... ;) sorry before... :D (Revision : DH-E6 = Toledo)
http://octs.ripping.org/3700_wr/stunni_wr.jpg
http://valid.x86-secret.com/show_oc?id=154697
before reached 3363.35MHz with -100°C, stunned_guy the new WR with his AIR-cooler ;)
if i get this week also a 3700+ toledo, this WR is also mine :D
Thx, gianni...
The memcontroller should good enough with multi 10 because i coudn´t got so high with the multi 11 and htt 309+.
Hmm, I had boot on AC Freezer at 3300 MHz. Now I have Scythe Infinity. I'm starting to think... alot. :D
GG! :toast:
@stunned_guy: buy/build a water-chiller! :D
hmm... the 1st and 2nd place in pifast @ hwbot are strange or fakes... what do you think:
1st place
http://octs.ripping.org/pifast_1st.jpg
2nd place
http://octs.ripping.org/pifast_2nd.jpg
Give me the hwbot-link in PM (or give our forums a visit) and I'll check it out