Printable View
It's on Orthos, bro. Heavy load. Imho, for the heavily benchmark like Orthos, Prime95 and OCCT, the CPU temp is always raising so much :cool:Quote:
Originally Posted by heikis
and don't forget the room temp in my hometown, Indonesia. Fiuh! No air conditioning, just 'naked' weather, so damn hot.
Fsb 460 (bios set before you clockgen to achieve 486) not stable for Orthos? Maybe you can raise vcore, vmem and vchipset before you loosing the mem timing. In my opininion, if you can't stable @ your screenshoot, 3.4Ghz is useless for the daily use.Quote:
Originally Posted by ssabripo
460 is super stable.....Quote:
Originally Posted by Sadhana
466 is super stable as well...
467 + is where things get hairy.
so, as a test, I increased Vcore and Vdimm slightly, lowered Fsb to 460 from 466 (in bios), and once in Windows, I icnreased fsb via clockgen to 480, 485, etc, and was able to get the screenshot above stable up to 4 hours in Ortho...but then is gave me an error.
I've tried many combinations, including increasing my Vcore and Vdimm, and I don';t know why my system just does not like anything above 466....467 is where things go south. :(
what about chipset voltages?
no way! I'm not touching them!!!Quote:
Originally Posted by Pyr0
I already crapped 3 mobos by raising NB, and I'm not doing that again....:nono:
dont think AUTO is any saferQuote:
Originally Posted by ssabripo
at AUTO it increases the chipset voltage automatically. i bet you cant get it to post at minimum NB voltage (manually set)
Quote:
Originally Posted by Sadhana
BIOS 0801??? the new BIOS isnt the 0804??
regards
0801 exists alsoQuote:
Originally Posted by mascaras
hello. Another first-time-poster :)
I have decided to buy an Intel C2D E6600 :). I have 2 OC goals with it:
1. Get it to 3,6 Ghz
2. Get each core as fast as my AMD64 3500+ runs now :)
The first goals is possible to reach :). The second? I don't know, going to find out :) Or can you tell me if it is possible or not? But is the first goal possible to reach with the stock cooling? Or do I need to buy a nice Zalman also?
Also I see that everybody here tunes his PCI-Express bus to 120 Mhz. On another forum I'm a member off, the keep there PCI-E speed at 100/101 Mhz. Why the difference? What gain do you get out of dat increase to 120? I'm not a gamer (I have an nVidia GeForce 6600EN Silencer now, and I'm not going to replace it). I do have an RAID-controller in my PCI-E bus (an Promise SuperTrak EX8350). How is he going to cope with that increase?
Another detail: you all run Windows. I do not :). I use Gentoo Linux on a daily basis. Do you know any alternatives for Orthos for Linux? I have an alternative for CPU-z: cat /proc/cpuinfo :)
This is going to be my first OC. The 10% I get on my AMD64 3500+ do I get out Asus AI NOS (or something, don't know the exact name :p). I already know I have to read a lot, but I didn't find anwsers on the questions I have now :). I hope somebody is willing to give me the answers.
I dont have Anything in Auto:nono:Quote:
Originally Posted by heikis
I have:
Vcore= 1.35
Vdimm = 2.25
V fsb = 1.45
V NB = 1.4
V SB = 1.6
My Board is FSB 535 1m stable but my CPU only FSB 528....damn :(
http://img220.imageshack.us/img220/3...528ddr2lk0.jpg
its my Hardware under a modded vapochill from an friend, there are no V-mods on the MB.
greetz
from VL125 and Stunned_guy from HWLUXX
Is there any software out there that can read VDimm on this board? I had trouble getting my RAM to work reliably until I had the VDIMM set at "Auto."
AISuite only reports "Auto" for the memory voltage.
I'd like to know where it is set when it is on auto so that I could manually set it to that voltage so that it won't drift at the whim of the BIOS.
Welcome - but according to this post you will have alot to learn. First of all 3.6Ghz might be tough. 3.0 - 3.2 is do-able with more possible especially with stock cooling. You will want to use aftermarket Second even at 2.4 Ghz my C2D crushed my X2 3800 @ 3 Ghz. When you OC you OC both cores you don't OC them separately. So the conroe will crush a 3500 even a E6300 at stock will crush your 3500 overclocked. Set PCI to 120 gives you a boost in PCI-e bandwidth that you'll never take advantage of, I set mine to 101 to ensure the PCI-e lock is working. The P5B-E I use has a PCI lock to 33, so you shouldn't have issues with overclocked PCI bus.Quote:
Originally Posted by cybertinus
No idea about linux software - never used it.
Does it matter?
Set it at 2.15V, thats what mines best at, and most DDR2 sits around 2.1-2.2V
Test around 2-2.3V
What is the max vdimm on the P5B DELUXE? I have the P5B-E which is only 2.1v :(Quote:
Originally Posted by Concorde Rules
2,45v is the max vDIMM on P5B-D, I believe.
2.45v, but real vdimm is arround 2.40 and 2.42vQuote:
Originally Posted by dnottis
thnx :)Quote:
Originally Posted by dnottis
I thought so too :). I have read a few topic already, but I'm still a very big n00b :)Quote:
Originally Posted by dnottis
Ok. But I want to get to the 3,6 Ghz :D. So then I need an cooler. Witch one do you recommend that can cool my proc enough, so I can get to the 3,6 Ghz? :)Quote:
Originally Posted by dnottis
True :). I've seen proof for that in more then 1 benchmark :). What I meant by saying that I wanted to get each core as fast as my 3500+ runs now, has something to do with Linux. When I say cat /proc/cpuinfo in Linux now, I get the following output:Quote:
Originally Posted by dnottis
You see a line "bogomips" there. Bogomips is an number that tells me how much calculations get done is a amount of time. I thought that it had something to do with floating point numbers, but I'm not sure.Code:processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 47
model name : AMD Athlon(tm) 64 Processor 3500+
stepping : 0
cpu MHz : 2420.239
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm
bogomips : 4841.87
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
When I have an C2D in my computer, cat /proc/cpuinfo will have 2 lists. 1 for each core. I want to have each core at atleast 4841.87 bogomips :). Then is each core as fast as my 3500+ is now.
I totally understand that if you rase the FSB or something that it as effect on both cores. I know that it isn't possible to run one core at 3,6 Ghz and the other at 2,4 Ghz :) (why you would want that is also a nice question :p).
ok. Then I think I'm going to use 101 Mhz for PCI-E and 33 Mhz for PCI (33 Mhz was also in the startpost ;))Quote:
Originally Posted by dnottis
Thnx for you anwser Dnottis
ok. Going to set another search for it then :)Quote:
Originally Posted by dnottis
Any idea why they are called bogomips (from bogus)? Because they are not a very good measure of actual cpu performance...
What do I need to use for cpu performance? Mhz isn't a good measure for cpu performance either :)
I need some help getting a higher OC on my P5b Deluxe wifi...
At 506 x 7 I am 9hrs+ Orthos Stable with 1.525v on the CPU.
At 507 x 7 I cannot pass 1 hour of Orthos at any Vcore...
I have the BIOS settings set to the settings in this thread.
I did not change PCIe Freq. and I upped ICH voltage to 1.25
If anyone has any ideas, please let me know... I'd really like to hit 515 x 7 stable. Am I pumping too much voltage into anything to where it could possibly limit my OC?
Thanks!
I have found that heat will affect maximum FSB. So using more CPU VCore may not be the answer. If you haven't done so already, try using 1.8v for SB VCore.
It may be that your CPU can't do more than 506FSB with the cooling you're using. Each chip has a different limit.
Quote:
Originally Posted by sierra_bound
I am trying 1.8v for the SB right now...
I keep my window open so my room is rather chilly. My load temps are anywhere between 52-60*C. I find it odd that I would be so stable at 506FSB yet impossible to get stable at 507FSB. Doesn't this seem like the motherboard?
Its hard not to be satisfied with 3.5ghz, but I really want to reach 3.6!!!
Thanks!
I want to reach 10GHz , but cant reach it, there is a limit.
But i am satisfied at 3.3GHz
Go for 100% oc man.. 532FSBQuote:
Originally Posted by Seufar