ditto.
They have the TFORCE 945P here in the US... why not the 965P?????
Printable View
ditto.
They have the TFORCE 945P here in the US... why not the 965P?????
biostar 965pt
E6600 w28B
g.skill c3 2gb
Nice board , but original bios 914 overhere, maybe try another bios because you cant disable c1e in this one.
when the system doing nothing for 5-10sec the board drops voltage to 1.0v, thats not so nice on 4ghz+ :D
strange freeze on the board to, wil post results later with another bios.
1m max air for now
http://82.173.172.10/Rol-Co/4175.jpg
Validation
nice chip also btw :slobber:
Syngrow is going TOO fast with this board :slobber:
http://valid.x86-secret.com/cache/129933.png
590mhz FSB 1:1 Dual channel 4-4-4-8
And sub 10s SuperPi1M too :slobber:
http://home.hccnet.nl/J_Bongers/SuperPI/9953.PNG
Validation
somehow i find that hard to believe, like impossible,, 576 fsb on a 9x multi ?
on this board ?
so ok who wants to take my money and buy one and send it to me. ?
believe it..!! i did almost 4200 air with those chips, same board..Quote:
Originally Posted by Lestat
nice result syngrow :slobber:
Thats more then water cooling then, the volts looks awful low thoughQuote:
Originally Posted by DaWaN
Cooled by unknown_road cascade. Vcore is 1.96v (CPUz can't read vcore correctly in my setup)Quote:
Originally Posted by 775911
1 model from asus. P5LD2. that was not an overclocking motherboard.... lolQuote:
Originally Posted by harshal
:slobber:Quote:
Originally Posted by SynGroW
You dont do things by halves do you
Seems like I have finally found a nice replacement for my Sempron Tforce 6100 combo :)
I was more than happy with the Biostar boards I owned so far. That S754 Tforce does 400Mhz HTT before the cpu craps out. And the 965 board seems to be a nice board as well. Think I will be getting one with a E6300.
Thanks for the vdimm and Vcore mod. Will do them right out of the box :)
hey guys:-)
just read some pages of this article...
i was about to get a asus p5b dlx but then i saw this....looks crayzee!
#
after 2 GA DS3 died when set ram timings in bios....im about to get this one.
i read you need good rams for max FSB ...
what about Cell Shock DDR800 recommended Vdimm is 2,2??
Anyone knows the cell shocks?? Should be same chips like Gskill GBHZ.
I would like to hit at least 500FSB....
What about cooling? Do i need any special cooling equipment? E.g. for NB or just a fan on it? if so...i would appreciate a silent one...any recommendations?
Is it really necessary to do the vdimm mod? i had the cellshocks on my GA DS3 @ 470FSB with 1,9v vdimm 4-4-4-8.
AND FINALLY:
some guys wanted to get this board...
im from germany and i would buy it for anyone who is interested in it...
as im new in this forum, we could manage it via ebay and payment via paypal...would be no problem, so.... msg me if u intersted.
My main question:
I have a 7950GX2....does it run on this board or not?!? I ready somewhere that it doesnt ...is this true? hopefully not!
THX for answering questions!
i sold my asus p5b dlx for this board and i've no regret. at all. :)
just i'm still waiting for a bios update.. does biostar has their own programmer?
ok im having troubles with this board. Seems like its got less options than a DS3. I don't see any dividers either. Can't seem to get past 333mhz FSB, when i could do 440mhz FSB with my DS3. I'm using kingston valueram ddr2 533 Hynix FP-C4. It could go 440mhz 1.8v 5-5-5-15 with my DS3 but i cant get past 333 mhz fsb with my Tforce P965PT.
any advice for me?
What bios are you running?Quote:
Originally Posted by BryaN.sG
Dividers are in the OC'ing menu but they don't go any lower than 1:1
Thanks for replying so quickly, here's my bios screen.Stock ver. 0914 http://img113.imageshack.us/img113/2865/p1010036oc1.jpg
I'm wondering if there's a need to change the NB hsf.
There are a couple of posts in the beginning of this thread that say they were able to oc a lot higher when they were limited before they changed the NB cooler.
You could post a screenshot of your ramtimings aswell, maybe something is set to the wrong values.
Dividers can be set under the system memory frequency option. IIRC you can set 533, 667 and 800 which corresponds with 1:1, 4:5 and 2:3Quote:
Originally Posted by BryaN.sG
Also it might be usefull to switch to the "The Stilt" bios which is posted a few pages back. I'm using that bios and my board is stable up to 585MHz FSB.
http://www.newegg.com/Product/Produc...82E16813138037Quote:
Originally Posted by Lestat
Thanks SynGroW, I've just updated to Stilt's bios and it works a lot better than the biostar one. More MCH options. Can go up to 396FSB for the time being. Gonna go get a better NB hsf later in the day.
Would a Thermalright HR-05-SLI fit the NB with a Ninja+ on the CPU?
Hell Yeah!!!Quote:
Originally Posted by greenman100
yeah not bad, but i prefer to have sata raid
With the 914 bios YOU WILL have freezes, that's because of the C1E function setting your CPU to 1,1Vcore.
Use The Stilt bios instead, it'll work fine :)
Close, but this is the regular version, not the Deluxe... :slapass:Quote:
Originally Posted by greenman100
Although it "should" clock the same... :)
hmm... i really interested w/ this board... especially the 965pt one... or 965 regular :)
i wanna change my current mobo with this biostar to pair with my prescott 506.
does it really have a good performance like those already posted?
first time i was interested in DS3, but too expensive :(
in Biostar's web listed that 965pt doesn't support DDR533, is it real?