Already tested it on two p5b's, it works perfect :)
Printable View
Already tested it on two p5b's, it works perfect :)
testing it since the hour of the release, it looks pretty good to me.Quote:
Originally Posted by Vric
Good.. I'm always a bit scared since the day of my P4S8X, when Asus released a new bios which was.. corrupted.. So many board died that day [:D]
I have no other bios to compare to. Today is my 1st try on this board and as soon as I installed windows I flashed to the 0509 bios.
is this good?
http://www.xtremesystems.org/forums/...1&d=1157854925
http://www.xtremesystems.org/forums/...1&d=1157854925
yes
WE want clockgen :D , gone test new bios on air ;) .
I'm surprised that this have not come up in all these messages. Didn't anyone try to run RAID on the P5B?
Just a word of warning for those considering he P5B (non-deluxe) as the so call RAID 0,1 support from the JMicron just does not work. It only have 1 internal SATA connector and one eSATA external connector, while theorotically you can use a eSATA multiplier board ($80-$120) to to give you up to 5 SATA connector so you can run RAID. There is an additional problem that once you set the JMicron controller to RAID in BIOS. It knocks out you primary (and only) IDE bus so you can't using any optical drives unless you get a SATA version. It really messed me up my new PC and I ended up having to spend another $70 to get a PCI-E 2 channel SATA II RAID card to get my RAID setup running. Isn't this borderline flase advertising?
i squeezed some juice out of her at the last minute but ram is holding me back.
Seems like I have to get a new board, 2.1v max vdimm just isn't enough.
My system wont boot at anything more than 410 :(
Sure, I could try a vdimm mod, but my soldering skills are crappy and I would most likely make a mess and kill the board. :---P
little test , vcore and vdimm mods ;)
http://i3.photobucket.com/albums/y90.../picontest.jpg
The lack of RAID on the SB is the only real downside to this board. I`m kinda tempted to buy one over the P5B DH, and put the money saved towards a HighPoint or Areca.
See the very first post of the thread. I mentioned it. There is no raid on this board.Quote:
Originally Posted by Wiz33
jup no raid thoQuote:
Originally Posted by Vric
but there's raid on the dlx wifi..the one i'm getting tuesday hopefully :banana:
dos no one has a oc tool for in windows yet ?
will one of u guys check and see if this setfsb works on the p5b vanilla. its a new beta version that came out yesterday and its for the deluxe but it might work.
it doesn't even using "ultra" mode :(Quote:
Originally Posted by natedog420
People of [Tea M-Kart0shka] are working on a new BIOS for P5B ...
Here is the first result : FSB525MHz + no more problems w/Elpida DDR2
BTW.Vch=1.45V,watercooled
In a couple of weeks - the "full version" will be out
how about some freakin vdimm for petes sake! :)Quote:
Originally Posted by TaPaKaH
vmod m8 , did a run today 2.89vdimm :D .Quote:
Originally Posted by trans am
and no the setfsb dos not work :'( tested this morning .
TaPaKaH
nice , gone see what some vmods will do to this bord :D
So far no progress with Vdimm ... added a new option : 2.2V. Setting it - system doesn`t boot ...
Something tells me - vdimm is limited by hardware :(
who could pls post the 309 bios :(
i've forgot to save it and flashed with this crap 509
i can't even be stable at the speed i was running with 309
tia
Using the eSATA and internal SATA would have been fine if it doesn't knock out the IDE bus when you set it to RAID in BIOS. Wish they have bette documentations. :mad:Quote:
Originally Posted by Vric
The new bios really help me with my Ratio problem. I couldn't get my OCZ Plat running 1:1 at anything over DDR570 (it's DDR800). With 0509, working at DDR850 1:1 (FSB 425Mhz)
Big improvement.
But I still have the "false start" bug every time I start the pc. Anything in the 300-425Mhz FSB do this.. Annoying, but I don't think it's too bad (maybe for the HD..)
:( :fact:Quote:
Originally Posted by |SiLA|
send me your email I will post. I have every Bios since 0170