Sapphire X800GTO² T.S.A Edition with 15c watercooling:
http://www.elektroni.fi/Stilt/TSA8696.jpg
Compare
Whole system is watercooled with Nexus products.
I still need those heatsinks for the memory.
Printable View
Sapphire X800GTO² T.S.A Edition with 15c watercooling:
http://www.elektroni.fi/Stilt/TSA8696.jpg
Compare
Whole system is watercooled with Nexus products.
I still need those heatsinks for the memory.
absolutely stunning results. Its this that same card as before?
what is the vgpu and vdd?
Insane score for a GTO2!!!! THAT is tryly Xtreme!!!
It is the same card.Quote:
Originally Posted by MaxxxRacer
VGPU is 1.65V and VDD & VDDQ 2.25V.
whate is a GTO² T.S.A ? i cant find any inof from thate card on the net
Look a page (or few) back.Quote:
Originally Posted by blind_ripper
are the connect3d the only regular x800gto that can be unlocked? so a powercolor would not work?
yes, only connect 3D ones are unlockable, but I think the new versions are not :(Quote:
Originally Posted by Snowman89
PS: Should i re-flash to the X850XT bios with vivo disabled?
Stilt, if that is one of your "average" cards I REALLY want to see what you can produce with one of the above average cards. I forsee ~9k in 05 if what you say about this card being average is true.
is anyone running 1.6v 24/7 for the core on air, zalman vf700 or something simular, so bloody easy to do makes me lazy to solder or draw
Got my first 8k with an unmodded GTO2 :D
8062marks
http://service.futuremark.com/compare?3dm05=1614239
Tin Tin mod thate beast :D , u have a very nice card there give it some v and ul get some nice clocks ;)
TinTin, that is an amazing card.. Some serious potential there.
Sure i will give some more voltage to it :D :toast:Quote:
Originally Posted by blind_ripper
Ok I flashed to the Sapphire X850XTPE bios and now my fan wont turn on on the card...any ideas?
solved nvm
ok so i flashed my GTO2 and I still only have 12 pipe
idk whats going wrong!!!!?//?!
lol your getting help from a ignorant nub like me :p:Quote:
Originally Posted by ZX7891
what do you expect?
we'll go again with the CORRECT bios and flashing tools..
lol
So, i got my GTO2 recently and its abit of a wierd one. ATiTool and Rivatuner say that its R430 and they say that it has 16 pipes from stock. The thing is that it overclocks like a R480 (650 Core / 1.3GHz RAM). Is this normal? I get ~7000 3Dmark05 at ~560/1.2. I'll post results later.
Take a look at the chips :DQuote:
Originally Posted by C Stat B
1° X800 GTO² 16pp (full air) no vmod , no opti -> first Test
Gpu is bad :( , ram roxxor :banana:
http://www.membres.lycos.fr/boblemag...05/7122pts.jpg
2° X800 GTO² 16pp ....
http://www.membres.lycos.fr/boblemag...05/7181pts.jpg
testing my new X800GTO² Dual DVI ...
http://wowgame.free.fr/Opteron%20144...7%207839-2.JPG
fully aircooled stock, no vmods, temp room ~15°C open window :banana:
soon vmodding (probably this afternoon :toast: )
vivo version? :)Quote:
Originally Posted by overcrash86
NICE score :toast:
it's not fully optimized, i can do better, but it's my 24/7 windows, i've killerd my 2k3 3 days agoQuote:
Originally Posted by TinTin
yes VIVO, then with already 16 active pipe stock
nice ill be chasing you with my agp :) :toast:
[IMG]http://img262.imageshack.us/img262/6673/wow4rr.jpg[/IMG]
http://service.futuremark.com/compare?3dm05=1633876
VGPU 1.73v
VDD Stock
Watercooling CPU + GPU
Catalyst 5.13
http://users.skynet.be/pt1t/x800/3dmar05_8128.PNG
these cards still unlocking?
Very nice score Pt1t :clap:
Bah, I need better memory on my GTO.
Its a pitty that My GTO craps out at 660. does 660 at 1.6VGPU, but even 1.75 VGPU doesnt help it one bit.
Whats safe 24/7 on water? I'm assuming 1.7 v should be fine (after droop)....
I'd stick with 1.6v. 1.7 will decrease the life of the chip to levels in which it might die/reduce overclock by the time you want to get a new video card.
Also the gains from 1.6v to 1.7v are superficial at best and will NOT be noticed in every day use.
TBH, I run at 1.49v everyday to keep the temps and wattage down. No sense in pushing it to the max for every day use. Infact, in windows I underclock the gpu significicantly to reduce power usage.
so... are they still unlocking? :stick: or should I get something like this:
http://www.newegg.com/Product/Produc...82E16814102613
next week i hope to get my card back en get go , withe the card on ln² aiming @ 9k 3d05:p:
That is an amazing score, ceep up the god work!Quote:
Originally Posted by Pt1t
Have you flashed your GTO2 with a X850Xt Bios?
I still use the moded GTO2 Bios, and I run it @ 648/648
but still "only'' score 7600 in 3D2005. I wonder what
you have done wright or I have done wrong, any ideas?
Little update .
Vgpu 1.75v
Vddr stock (i can bench @ 651mhz for the ddr3 but not with timming tweak , and it does only ~8030pts )
http://users.skynet.be/pt1t/3d2k5/system.jpg
http://users.skynet.be/pt1t/3d2k5/2k5_8191.PNG
http://service.futuremark.com/compare?3dm05=1647501
No it s an X800 gto² 16pp bios.Quote:
Originally Posted by jackea
nice score Pt1t , vryday my card is back from modding .
hope it will do beter now , if i can get the rdx200 working
My C3D GTO flashed no problems...
God a weird thing going on though, this thing i have had up to 525 core so far no problems, stock cooler was holding me back at like 60c though.
So i put on my zalmann VF700, and temps go WAY up, like 120c loaded, but core still clocks fine, ive checked contact twice, its perfect, the core leaves an imprint on my zalmann. Now, i would just ignore the high temps and keep clocking, but i think the cards got a saftey mechanism of some sort and it shuts off my pc if it runs that hot for over a minute.
is there something i dont know?
Full Air (inside 2/3° ) , no vmod , cooling stock :)
http://www.membres.lycos.fr/boblemag...05/7282pts.jpg
Well ive found my stock max's in ATItool 0.24. Core:627 and Mem:634 i have the ati silencer by the way and my temps are 50/38 in artifact testing at 600/600 for 60min no errors found..is this long enough to get a good idea on the stablility of these settings?.
When i say stock i mean it hasnt been flashed to 16p yet. Im not to sure as to what i should run my vid card at 24/7 i wanna keep it for atleast!! 1 1/2 years.
Do you guys thnk 600/600 is safe? and will my max OC/temps get higher after the flash to 16p?
Just out of curiosity, did anyone's die yet? :D
that doesnt impress me, i get 7650ish at 610/640 on the stock cooler (lemme add a smily as to not offend) :)Quote:
Originally Posted by The Stilt
hey guys,
anywone did a vmod on a connect 3d gto? i didn´t find one...
3D Gto is a regualr X800 PCIE. go to www.techpowerup for the guide.
hi, i allready looked there....
now i saw my gto has the pcbs & chips like x800xl & x850
Yes, u need the same guide, as for the X850 PCI-E. :)
yes, i did the pencil vdd mod yet, now with only 2,04v 570 is possible instead of 550
2,2V on Vdd and Vddq shot be the sweet spot. :)
with 2,13 i can run 3d mark @ 600 / 600
the vgpu mod doestn´t work, it gives me no more mhz :(
U messured the Vgpu?
I havent done the VDD mod, but when i checked the voltage, it said 2.08 v.......weird....
Quote:
Originally Posted by funkflix
yes i did....
600/600 opteron 170 @ 2850 tccds 1:1 2,5-3-3 i get ~ 7700
Maybe u need the Igpu (OVP-Mod), too.
the resistor for this mod is NOT at the card....
i often heard that some resistors are missing @ gtos
Now have bios: Sapphire.X800GTO2_16P.Samsung16.bin
I want try from TinTin bios
Which changes it have? memory timing and someone yet?
Which command for DOS is right ?? :
flashrom –f –p 0 DEVKA.bin
flashrom -p 0 DEVKA.bin -f
http://img263.imageshack.us/img263/3408/73502ih.th.jpg
catalyst 5.3
XS TIMINGS
full stock (stock cooler and stock voltage
ambient temp 22°c
Xp90c+SE2 for cpu
no comment ::banana::banana::banana::banana::
http://wowgame.free.fr/Opteron%20144...0%208023-2.JPG
Way to go :toast:
I just got my Sapphire Gto2 that also is 16 pipes out the box :woot: Hope for similair results :)
Quote:
Originally Posted by overcrash86
9000pts for this week end with an single core cpu :banana:
I just finished testing of my Sapphire X800GTO² card, this time cooled with R507 compressor.
The score is way too low since the 3DMark05 doesn´t like too much of Intel P4 cpus. I´m also running with Windows 2003 Server OS, so with Dothan or Athlon 64 cpu and Windows XP the score would be few hundred points bigger.
Anyways I achieved 106% overclock for GPU with Vapochill LS cooling.
I was able to run all tests through at 816MHz GPU speed with 1.78V vgpu voltage.
Unfortunately this is the "production" version of the card, so the highest available VDD & VDDQ voltage is 2.25V. With tight ("Eshbach") timings the memory maxed out at 645MHz.
http://www.elektroni.fi/Stilt/GTOMounting.jpg
http://www.elektroni.fi/Stilt/Mark05-9006.jpg
http://service.futuremark.com/compare?3dm05=1661036
OMG!!! :clap: :clap:
9k broken!! Way to go mate!! :) :banana:
Anyway, i had to do a clean install of windows, and now i can only go past 600 MHz on the core with ATi tool, not through tray tools. Any idea why? before, i could :stick:
http://img.photobucket.com/albums/v6...7949/atitt.jpg
Also, i tried the VDD mod. At stock, my memory wil do 615 MHz, s i raised it to 2.2 v, but then it wouldnt even do 615 MHz :stick: even 570 MHz caused artifacts :stick: . I removed the mod (pencil) and 615 MHz was fine. any ideas why the mod wont work?
wow.......9k for a GTO2 :clap: :clap: :clap:Quote:
Originally Posted by The Stilt
The memory or it´s power cirquit is probably running too hot.Quote:
Originally Posted by K.I.T.T.
Enhance the cooling and you will probably see higher overclocks.
You used custom drivers taht you named Sapphire X800GTO T.S.A Edition based on 6587, that are non WHQL, may we learn more about them ?Quote:
Originally Posted by The Stilt
It is just a normal Catalyst 5.13 display driver from ATI website, with changed device name for 5D52/1600/1002 gfx.Quote:
Originally Posted by Ebola
ROFL man.. that is nutso... You do know that 7800GTX's get around this score at stock.. funny stuff. absolutley amazing score.
very nice the stilt , i have killed my x800gto² .
gone try rma it ;)
:nono:Quote:
Originally Posted by blind_ripper
;)
dammmmmmn, i have killed my gto2 a short while ago
http://img323.imageshack.us/my.php?i...5mark761oe.jpg
now this is history for me
whase oc'ing 8k 05 with cpu @ stock 2.2ghz :) 681mhz core no artifacts :p:
hm, then mine is nothing
OT nice score this was my score b4 i torn down system for s mb sale that fell through so i well put back together and see if i can get u :) :)
btw its a agp x800 so dont go to fast .. and u just solidified my choice to use 2 x850 in CF as x1800 to expensive 4 me
[IMG]http://img262.imageshack.us/img262/5318/gfgf9ee.th.jpg[/IMG]
:woot: 3 gto2 burned in 2 days , Overcrash , boblemagnifique and you.Quote:
Originally Posted by blind_ripper
Sucky week for it !
lol :DQuote:
Originally Posted by Pt1t
this sure is an odd card.. the thing crashes before it startrs artifacting lol, i got temps down to around 45'c with my zalmann, and itll run rught up to 591 just fine, 600 crashes without artifacts, so its got to be heat.
anyways, im going to try and mount an old AXP thermalright SP-94 onto it. That should do the trick hehe.
this is a 16pp C3D Gto BTW...
Would flashing to the C3D X800XT Bios be a good idea?
no it isnt temp , you have not enough voltage on gpu to it 600mhz , it s all :pQuote:
Originally Posted by Revv23
random lockups during overclocking means that the gpu is not getting enough volts or that it is just clocked too far, or both.
For some reason newer ATI cards will not artifact on the gpu, they just hard lock and u have to restart.
My card restarts my comp at 627 gpu and i get artifacts for memory at 637. So for the gpu i have to raise the voltage?!?!? to get it higher....hmmm ok is there anyway to do this without vmodding? like through windows/dos or somthing? and whats the stock voltage this card runs at..Quote:
Originally Posted by MaxxxRacer
nope, sorry, only multimeter+soldering/pencilQuote:
Originally Posted by $JG Money$
u have an x800gto2?
Yes yes i do :D
not only new wannes , think its the drivers .Quote:
Originally Posted by MaxxxRacer
my x800pro , and gto² have bothe hard lock up :p: whene the oc' is not stabel
i just bought a gto2 from overclockers.co.uk
the card is a vivo dual dvi card with r480 core 16 pipe enabled stock
out of the box max gpu 515 higherst ram i have tested 600.
flashed with the modded techpowerup bios and still the same.
i have a vgpu mod but the lowest it will set the vgpu is 1.49 it will go past 530 gpu but is stil unstable. gpu temp showed 62C but the whole card as realy warm ram was almost hot to the touch.
i think with better cooling it will go higher.
still very happy with the performance at 500 / 600 for the price.
by new, I mean X800 and later. So that will include all the X cards.
oh i see, im coming from a 9800p so this is a whole new world of graphics, either way, ive got my old 'SP-94 on it, 400g of heatpiped copper works in my favor either way i figure... out to do well with a 92mm panaflo, i cant do the vmods until next weekend though hehe.
Hello :)
My Sapphire gto2 was 16 pipes out the box :D
It does 640mem 590core on stock cooler/volts but locks up in 3d tests. 580/640 is stable :D
Would flashing to x850xtpe raise voltages maybe give me higher core ?
Would i make things worse with it already having 16pipes open ?
Whats the best bios to use ? :scope:
Thx for any advice :toast:
I just got GTO2 and I flashed it to X850XT PE.
Then I overclocked to about 580-590/640 is my maximum.
So I think it's because of cooling, so I changed it to water cooling.
The temperature drops a little bit, so I try to overclock it again.
And it's can go only 590/650, if it goes just a little higher, the screen is going to be frozen and it just shuts down.
What about you guys??? Do you have the same problem???
Or this is the maximum that this card can go???
yes. same here.
imo no solution. try mod?
Yeah I think it's able to go higher but I don't know how????Quote:
Originally Posted by webwilli
Dang, i guess the new dual DVI cards didn't came any good to oc when compared with the the non-VIVO.... Lockup at > 560MHz :(
3DMark05 - 7334
Wow nice score.. how come i only get 7030 on my 053dmark? 2.8ghz(opty144)
and 600/600 on vid card with 16p enabled. And only 29233 in 2001se? WTF!!! such a big difference in 2001se score? what am i doing wrong...id love to be that high and i kno it can be done:(
29233 @ 2k1 se isnt enough with rthis clock.Quote:
Originally Posted by $JG Money$
I do more than 30K with Gto² at stock under winxp sp2
http://img460.imageshack.us/img460/8...tock9zm.th.png
My results with a gto2 ... low clock for the GPU :(
Here mine, Maximum at 580/640
My card started balcking out in CS: source.
ran at stock, same, anyone else have the problem?
Quote:
Originally Posted by Pekkie
as said on the page before this one, newer ati cards dont artifact, they just lock up, its not temps, its volts, you need more.
Hi
Have Sapphire X850 GTO² 12p @ 16 p
actually running 540 Core and 600 Mem (So 1200) (ATI Tool 0.24)
Both GPU and VGA ram modules are on water.
Issue is :
When running intensive games, i get some strange little artefacts :
Demo NFS Most Wanted
Far Cry 1.3
BF2
Halo 1.2
x-plane 8 also....can't run it 1280x1024 full details with this set...A64+X800 GTO² modded :(
I think those are due to heat or a lack of voltage....but the entire water circuit won't go higher than 44° overall temp....minimum fan level ;)
I've read that other members have this issue.
Bad serie R480 chips?/Bad ram modules??/??
Keep it coming :rolleyes:
Impressive Cooling.
What are your temps?
I konw the cooler...Thermalright??;)
Is your rig silent??:D
Will post some updated 3dmark 03/05 scores caus' Dual core is on the way :)
P.S. : Would you use Catalyst 5.12 or 5.13......:confused:
Maybe Omega drivers.....?
yup thermalright SP-94... IMO much better then an XP-90... but less compatible ;)...
my rig can be dead silent but i turn fans up just a bit for gamin to keep cpu cool, have a TT BT on the way to fix that though.
anyways in ati tool with 580mhz it gets to maybe 38c under artifact scanning. This is about 20c cooler then with a vf-700 for me.
edit -most up the time my OCZ PS520w is louder then the rest of my rig... someday ill end up with a seasonic i guess.
edit 2 - personnaly i always use the latest cats...im not that hardcore though.
hey guys!
i ned the stock mem timings of a x800xt, x800gto (2) or x850xt.....
i din´t found anything....