i just got the chip today i plan on trying to burn it in at this speed here even if it crashes now and then as long as i can prime a few hours at a time i think i can make it run this speed. where do i get the new max t screen prg at?
thx perc,
Printable View
i just got the chip today i plan on trying to burn it in at this speed here even if it crashes now and then as long as i can prime a few hours at a time i think i can make it run this speed. where do i get the new max t screen prg at?
thx perc,
http://www.thecoolest.zerobrains.com...topic.php?t=83
Download here.
my 144 is 63c ;)
mines a 67 i thought all these 0530APMW CABNE chips were the same? so i take it that the max case temp is diff even with same stepping and all that?
peace perc,
3000Mhz 1,36Vcore Prime Custom FFTS In Place 15min for over 5H 35min still running!!!Aircooled like in the Sig!!!!Ambient Temp was 15,5°C-17°C.(Roomtemp)
http://img441.imageshack.us/img441/8...om5h4ez.th.jpg
http://img433.imageshack.us/img433/4550/bild10mz.th.jpg
http://img433.imageshack.us/img433/2029/bild40ku.th.jpg
Dude....your ambient temps are down in the single digits :rolleyes:
Id have to agree on Vapor on this one, where are u rufus? It must be awfully cold there for your hardrives to be running so cool. I imagine you must have an air-con unit strapped into your case, or your benching in temps belowe 0, in a freezer maybe!!Quote:
Originally Posted by Vapor
Please tell us all your details, so others trying to stabalise their chips on air now the facts.
Ditto.
Lukü/Lukue = aircoolingQuote:
Originally Posted by dogsx2
Wakü/Wakue = watercooling ("tripple" stands for tripple radiator of course)
Kokü/Kokue = cooling with a compressor (eg. Mach/Prommie)
Thanks volvic, welcome to XS. :welcome:
Quote:
Originally Posted by mongoled
the screenie he has above shows air temps where you seeing the single digits at? im looking but i dont see what you guys are talking about.
peace perc,
HDD temps
He must keep his harddisks in the fridge. :D
Guys just bought a Thermalright SI-120 with 120mm Panaflo L1a 69cfm @ 30dba, that's going to be good enough for these babies right? :)
Hey guys, how are you going to bruin your Opterons ? c'mon tell me your methods ;)
I guess what FCG does works....run P95, restart when it crashes over and over...it'll eventually go a lot longer between crashes.
I can get hold of an AMD Opteron 144 Tray ("Venus") S939
OSA144DAA5BN Stepping 0536 VPAW
Does that sound alright? :)
Quote:
Originally Posted by Richdog
Where from?
Edit: I see now. How much is postage?
CABNE 0530 APMW 3ghz 1.4v
:stick:
CABGE 0536 VPAW 3ghz 1.9v
It s a big difference between 6weeks
+- same temp ...
SAME TEMP :eek: :eek: :eek: :eek: :eek: :eek:Quote:
Originally Posted by Pt1t
Wow that's a lot of difference in voltages...
Any other recommendations ? Like high/low vcore, high/low Mhz or high/low Temp ??Quote:
Originally Posted by Vapor
At it's max....it'll lower the voltage needed to run at that clockspeed and might even add a few MHz with extra volts.
I would like to disagree with this figure....I run my CABNE at 3.15GHz with 1.65V and am not getting terribly high temps (I'm on crappy water cooling with 22-23C ambient). Running the CABNE for a while at higher volts drops its temp A LOT, people just haven't done it yet apparently. On top of that, I've been running the Ricky Tweak (yes, on crappy water, too lazy to get rid of it frankly) which only adds more heat.Quote:
Originally Posted by Pt1t
So have the OSA144DAA5BN Stepping 0536 VPAW not been doing too great then? Has no-one hit ~3gh with ~1.5v?
OK guys, here's the guy who has multiple 144's READY TO SHIP on Ebay, I just bought one from him... damn i'm good to you http://cgi.ebay.co.uk/Neu-AMD-Optero...QQcmdZViewItem
All I ask is that no-one please buy multiple CPU's so that everyone who hasnt got one gets a fair chance, there's a lot of guys who haven't got one at the moment and were late pre-ordering, so spare a thought for them. :)
:woot: :toast:
As Dinos said, look at HD temps,Quote:
Originally Posted by Perc
Hey Vapor did u say increasing the voltage to such a high amount resulted in less heat being given out??? And running prime over and over again does make the CPU more stable, my small FTT's started failing after 2hrs, then 2hrs 45min, then 3hrs 15 min, I just got back from work and this time it failed at 3hrs 57min.
So prime95 will continue
:toast:
Quote:
Originally Posted by Richdog
never , it s a CABGE ... , 3ghz Stable with ~ 2v :nono:
Are they that bad? :(
+ - the same of a good venice with 1Mo L2 , but you need a lot of volt !Quote:
Originally Posted by Richdog
same step : http://users.skynet.be/pt1t/144/SPI32M_2901.PNG
When I first had my processor...my load temp was 54C or so for 3.15GHz 1.65V, now it's down to 44-45C with nothing else changing (well, it sat on my desk for a few days :rolleyes: ). I had 44C load with 3.1GHz 1.45V before going to high volts, at which point the temps were VERY high but worked their way down. No doubt it's still a HOT processor (my 4400+ @ 2.75GHz 1.62V runs at 46C load for comparison) though.
BTW, good to see the burnin working for ya :D
:banana::banana::banana::banana:... has NO-ONE got a good clock with them at lower volts?
What? The CABNE or the CABGE? CABNE has been doing quite well with lower volts (though there CERTAINLY are gains at higher voltages if you cooling can handle it).
CABGEs on the other hand....
for 1MQuote:
Originally Posted by Richdog
http://users.skynet.be/pt1t/144/2922_1,792v.PNG
Oh well who cares, if I can get 2.8Ghz on around 1.6v that will be fine for the moment, then ill just sell in on Ebay and buy a new one. I just need one NOW as the rest of my parts are coming over the next couple of days. :D
And that's about .4V out of the 'low-volt' spectrum....Quote:
Originally Posted by Pt1t
hehe , It s Far ...Quote:
Originally Posted by Vapor
this also : http://users.skynet.be/pt1t/144/CPUMARK_393.PNG
Maybe an Axp core :confused:
I 'll test it tonite with beter cooling.
With some ice.
http://users.skynet.be/pt1t/144/CPUMARK_394.PNG
Good god, that's some voltage these later steppings are taking, looks like a totally different CPU.
Here's my CPUmark99 result:
http://www.xtremesystems.org/forums/...id=38397&stc=1
Is this stepping any good?
CABYE 0536 GPMW
Hoping to get one of these!
Hoping for a 3ghz on air one :slobber: :D
Quote:
Originally Posted by cool_dude
Try it and you will see. Make youre hopes come true. In the Air tonight. :)
Hey Rufus7,Quote:
Originally Posted by Rufus7
r u going to answer our questions regarding your ambient temperatures?????
Is saw that one to, on an other site. Waiting for results :toast:Quote:
Originally Posted by cool_dude
Look at my Post today. theres a pic with 16,5CQuote:
Originally Posted by mongoled
It was between 15,5-17,5°C.
http://img80.imageshack.us/img80/5294/bild15oc.th.jpg
http://img334.imageshack.us/img334/5956/bild33gv.th.jpg
So how come your hard drives where at least 10C below the temp you r showing on your thermometer??Quote:
Originally Posted by Rufus7
Quote:
Originally Posted by mongoled
I have a 120MM Fan insisde the Case before the Harddrives!!!
Shoul ic make some Pics with the webcam know? It take only a few minutes to make the pics..ok? I have Samsung SP1614N harddrives they are allways cool!!
http://img334.imageshack.us/img334/5956/bild33gv.th.jpg
http://img439.imageshack.us/img439/7811/bild45zt.th.jpg
http://img439.imageshack.us/img439/444/bild58rk.th.jpg
Well i dont really need pics, just very curious abt the hd temps!Quote:
Originally Posted by Rufus7
no matter how much airflow, something cannot go below ambient without some trickery. either it's colder, or your hard drive is misreportingQuote:
Originally Posted by Rufus7
Rufus7,
You have broken several laws of physics if you aircooled HD temps are 10ºC lower than your ambient. ;)
There's something weird going on with your temps.
Or Everest is not right!!!.Hi Speed Air cools very good!And the Temps on the Floor are always lower then on the Desktop.
http://img434.imageshack.us/img434/5...fter6ps.th.jpg
I think Rufus deserves a break, his mobo and CPU temps were about normal i'd say, his overclock very good despite Prime erroring out.
Just found out why OCCT didn't complete while Prime did... had to set read preamble back to 6,5ns and it just finished. :)
So the 146 and 148 are going to have the CABGE stepping too? Has anybody received one to confirm this?
And tonight when we have so around 16°C Ambient i will try this to complete tonight for a few hours on Air. 1,328Vc and 2980Mhz.
Heres the Screen when i failed.
http://img219.imageshack.us/img219/3...core2ro.th.jpg
the Ambient on the Screen was higher then 18,5°C.
Load i had over 45°C and Idle was 35°C of the CPU with Aircooling.
Weird temps my friend. Still a good show.
Temps are falling in my ambient around 16,8°C now its time for Prime testing.
looks like our first 24x Opteron 144 CPUs ordered over at OCAU may be that stepping...one user confirmed that this morning.....CABYE is a good stepping.....let's see what it does.......if they turn out to all be that stepping there will be 24xCPUs being overclocked in the next few days ;)Quote:
Originally Posted by cool_dude
Quote:
Originally Posted by dinos22
What mobo you planning to use?
in sig...if i get time i'll test on Asrock's new mobo as wellQuote:
Originally Posted by LexDiamonds
i've got the damn Expert on order as well but it seems there will be a delay damn it
OCAU guys will have mixed mobos....most DFI but few Asrock, Abit, Asus, MSI and few others as well......i'll update some results here when they get posted.....so far we've had only a few 0530APMW 146 CPUs and they all seem to do 2.9GHz comfortably which is to be expected......weather is kinda on the hot side so won't help too much with high end OCs but should be good regardless
wow, just wow... just finished reading all 40 pages... with my venice @ 2920, i've tasted 3092 and am slightly annoyed that i can't get any higher than 2920 stable...
lovin my 3500 venice, but just bought a 146 from oc-uk :D
the plan is to put my 3500 in my neo2 rig with the xbl, and then let the 146 loose with the gskill on the ultra-d... maybe they can have a race! :lol:
Hi all. Opteron 148 came today - it's a CABNE 0528GPMW!!! I am so not worthy. Wanted to give everyone a heads up - ordered it from Compumusic.com. I ordered late last week, so there are likely some left from the same batch.
Anywho, could someone tell me where I should be posting my results as they come in? This thread? Elsewhere?
Initial results: 2900@stock, OCCT stable, Spi 32M stable, 31C idle, 39C load. Will prime overnight. Seems like I've got a fair amount of headroom.
CABNE= :DQuote:
Originally Posted by ixtapalapaquetl
Post your results here with the rest, what cooling?
XP-90 + Vantec + open case + 19C ambient. Now motivated to save up some scratch for a good WC system!Quote:
Originally Posted by dogsx2
Big jump from your sig. :) Nothing like a little speed to make your day. :DQuote:
Originally Posted by ixtapalapaquetl
hehe, looks like they're out of stock at compumusic now ;) sure hope my order from last Friday from there is a CABNE
Quote:
Originally Posted by ixtapalapaquetl
How hot are optys?
1000+ posts in this thread in 16 days. :woot: :woot: :woot:
These chip really get the oc juices going. I've had more fun with these optys then any other cpu I've owned.
Keep posting those results and any secrets you may have uncovered while oc'ing.
amazing this cpuQuote:
Originally Posted by dogsx2
:banana: less than 3m :clap:
http://img416.imageshack.us/img416/9...er2m59s4nm.jpg
lol man you are not lying i have no idea how im going to bring my self to put my 4400x2 back in. ill probly have to kill this cpu before i stop using it. i may as well just sell my 4400 cause i dont see me using it any time soon....
peace perc,
Your really cooking with gas. :DQuote:
Originally Posted by NISCO PT
And thats the result of the session tonight.2980Mhz 1,328Vc Ambient 14.9°C -16,8°C
http://img129.imageshack.us/img129/4...tom4h14.th.jpg
http://www.xtremesystems.org/forums/...id=38436&stc=1
Lovin these new Opterons. Cant wait to get mine- UPS needs nightime courier service!!!
yup my 2x 144 are part of that 24x cpu batchQuote:
Originally Posted by dinos22
both
OSA144DAA5BN
CABYE 0536GPMW
pull out that FX57 dude....forget memtesting and get stuck into these suckers......fingers crossed.......that they turn out OK :rocker:Quote:
Originally Posted by eva2000
so we now see CABYEs in 144s, so far thats the first i've seen, they show up in the 148s
those seem like the middle ground between the golden CABNEs and the average CABGEs
Ive never had a X2 so it is funny for me to see you saying u are having some much fun with the Opty u have. Care to explain why? Ohh and get some results up ;)Quote:
Originally Posted by Perc
first CABYE 0536GPMW under zalman 7000...just a quick one from OCAU user mute.......you have to click on image and refresh in browser it works ;)
Quote:
Originally Posted by mute
Looks pretty good for just slapping it in. Temps should come down after use. Glad to see there better then the CABGE. Who knows, may be as good as the CABNE. Let's see more results from them.Quote:
Originally Posted by dinos22
Was going to look at your forum, OCAU, but couldn't reg. as I use hotmail.com. :( I will just have to get info from you.
When my 146 turns up (GOD I hope I get a goooood one) looks like I shall be in the same boat, my X2 3800 is by far the best buy I have ever made and just sooooo smooooooth, but if my 146 can cruise along @ 3Gig then it will be very hard to choose :confused: :DQuote:
Originally Posted by Perc
yeah you need to use a non-free email to sign upQuote:
Originally Posted by dogsx2
Quote:
Originally Posted by mongoled
well man for one i have just set my highest 3dmark 01 score with this cpu wich i couldnt do with my x2 nor with any other cpu inclucding my fx-53 so yeah this chip rocks! right now im just trying to burn this thing in a little then ill go for some results but for now heres a couple tests ive run but keep in mind this is for burn in not testing for stableness...
peace perc,
Looks good, I love 2k1, know it by heart. You probaly got at least another 100Mhz in it. My 146 for now tops out at 3110 on TT BT. Let see some more 3D action.
Wait, I forgot your on phase. You got alot more. :D
Guess I won't ever see it then, not going to pay to see a forum.Quote:
Originally Posted by ArcTan
yeah well my memory tops out around 310/320htt so at 1:1 i dont expect much more then 3200mhz anyways atleast not at 1:1... anyways heres a super pi run at 3gigs. i found that just by changing idle cycle times from 256 to 16 my score went down by 1sec... ill be getting more aggressive with this chip as it burns it.Quote:
Originally Posted by dogsx2
peace perc,
hey guys so you sayin the best method here for the burn in i will need to do is to just push it high and hard... say 2.9 with as high voltage as i can tolerate.... and keep runnin p95 kinda thing? if it fails start it again? and then at what point do you find that you can lower voltage/raise clocks?
you don't get email addresses from your isp?Quote:
Originally Posted by dogsx2
I just used my isp's email
are there already some new weeks???
you know you should be pulling out your FX57 and putting in one of your opterons :slapass:Quote:
Originally Posted by eva2000
I will be getting a Week 30 Opteron soon if my friend manages... :banana:
Hopefully its the FX line. And anyone got that link about the Opteron steppings? :)
CABYE 0536 GPMW received this morning.
Using:
Stock heatsink
Asus A8N-SLI deluxe (max vcore is 1.55v :( )
Looks like I'm a bit unlucky. Maximum stable clock I can get is around 2.75GHz.http://www.xtremesystems.org/forums/...chmentid=38453
I can get an CABNE 0528GPMW 148 from UK, but i dunno wether it's worth it. My 4400+ does 2600mhz with very low volts.
Could i easily hit 3ghz on a XP90c? max Vcore mobo has is 1.5 i think.
good news, my mobo is back.. i can get to work again :toast:
as a side note, it's R.AC0
Wait for your result!!! :DQuote:
Originally Posted by ozzimark
My DFI board Rev is R.AAO, I've had the FSB up to 370mhz stable with stock volts, Haven't tried higher so I suppose this is a good board.
my CABYE 0536 GPMW :banana:
Cooling = Big Typhoon
Mobo = DFI-DAGF
http://img273.imageshack.us/img273/6313/328x90ym.th.jpg
Nice Overclock ken, those CABYE are defantly better then the CABGE.Quote:
Originally Posted by ken
Quote:
Originally Posted by Hugo van Dijk
well if that voltage cpuz is showing is right, thats not that great, how hot is it under load with air and that voltage (if that voltage is right)
yup, the voltage showing is right, thats y i got the :banana: sign :(Quote:
Originally Posted by Millyons
temp is OK though, 45 underload using Prime
Looks like the CABYE is a "tweener" in the steppings line up so far. With air:
CABNE ~3ghz ~1.45vcore ~50C load
CABYE ~2.95 ~1.65vcore ~45C load
CABGE ~2.85 ~1.65vcore ~40C load
Someone should probably start an official s939 opty o/c stepping thread. ;)
I would, but I can't even get my hands one of these very elusive gems. By the time I find a source, they've sold out. :(
What wrong with 1.632V, yes compared to the CABNE its alot indeed. But compared to the CABGE its good :)Quote:
Originally Posted by Millyons
CABYE is a nice stepping, if you can,t get a CABNE.
i've done a bit of testing on mine last night
CABYE 0536GPMW
I can suicide on at least 3.1GHz......didn't try higher but see no issues
http://img411.imageshack.us/img411/3050/cpu30997vv.jpg
1.36V 2.7GHz 1M SPI
http://img431.imageshack.us/img431/7...ider1pt.th.jpg
1.36V 2.7GHz 8M SPI
http://img382.imageshack.us/img382/1...ider1ma.th.jpg
1.44V 2.8GHz 1M SPI
http://img372.imageshack.us/img372/3...ider0ml.th.jpg
1.44V 2.8GHz 8M SPI
http://img372.imageshack.us/img372/2...ider1sm.th.jpg
1.5V 2.9GHz 1M SPI
http://img434.imageshack.us/img434/1...ider9pn.th.jpg
1.52V 2.9GHz 8M SPI
http://img434.imageshack.us/img434/5...ider9xz.th.jpg
i can only reach 2970MHz 1M SPI.....i am going to be tweaking for 3GHz tonight