Tommy, time to waste some more money on Hr-09s!
Printable View
Tommy, time to waste some more money on Hr-09s!
http://img4.shareavenue.com/getimage...7aeefc52b3a9e2
Ultra-120 extreme soon I hope :cool:
here's my current rig, aircooled with an Ultra-120, HR-03, and NB-1C inside a Lian Li PC-62B case
http://www.mac-owner.com/sneaky/my_rig.jpg
Nice rig there... have never seen the 62B before... is it a good case?
And did you have to modify your cardholder to fit the HR-03?
Yeah, maybe i'll buy one next week ;)Quote:
Originally Posted by cyberspyder
http://img292.imageshack.us/img292/3623/img5951rd0.jpg
only a bit dusty, nothing else other. today my system ist cleaned by my vacuum cleaner. :toast:
It looks like you put your laundry in your case to dry, and that poor HSF collects the lint :p:Quote:
Originally Posted by deepsilver
:owned: .......... :wierd:Quote:
Originally Posted by ChaosMinionX
Thermalright is everywhere http://img517.imageshack.us/img517/7...ufel028an4.gif
http://img520.imageshack.us/img520/1070/dsc00676bm8.jpg
That RD600 board is looking like teh Cex
Very nice with the thremal right stuff tommy
My setup, air cooling :D
http://img.techpowerup.org/070512/DSCN1467.jpg
hah nice you got the P5K alreadyQuote:
Originally Posted by xs64
This is a new set-up for a friend. Due to the size of the HSF, i couldn't get 2 of the sticks of RAM in, so I put the fan on the far size blowing through to the back. The fan that was on the back is now down in the front.
Specs...::
e4300 @ 2.2
4x512Mb of 5400 C4 (they didn't have 2x1Gb)
8600 GT
320Gb
DVD-RW
Gigabyte i945-DS3
Seasonic 430w.
Scythe Infiniti
Temps are 37* at load.
http://img300.imageshack.us/img300/1797/65729285gv1.jpg
http://img524.imageshack.us/img524/2245/35786727rt6.jpg
http://img522.imageshack.us/img522/39/62141940vo2.jpg
my actual rig (specs in sig):
http://img252.imageshack.us/img252/5791/pict0001xx0.jpg
@ xs64: nice system, but why you don't have an fan on the back??
Omfg!
SaII: thanks :)
deepsilver: i did have, but not install yet
My new Vreg-cooler is here :D:D:D
3-times bigger than the Stockcooler :D
http://img511.imageshack.us/img511/4525/31661119uu0.jpg
http://img526.imageshack.us/img526/2628/59965286zg5.jpg
Looks great :eek:
http://img511.imageshack.us/img511/4986/73756715th2.jpg
Any Scythe Ninja or Infinity users here?
my DFI board has a different layout so I dont know how it will be when I have either Towers mounted and would like to see before I buy
Nice! Where or how did you get it?
It's a Vreg-cooler from the new AC Accelero S1 ;).
Here is mine. Simple and clean.
http://jflogerzi.freepgs.com/Forum%2...res/rig006.jpg
Quote:
Originally Posted by Tommy_Hewitt
OK, THX! Good to now. :)
so what is best
thermalright ultra 120
tuniq tower
sycthe ninja
?
None of those, its the Noctua NH-U12 with all 120mm 1200 Noctua Fans.:)Quote:
Originally Posted by pie_uk
Quote:
Originally Posted by pie_uk
Quote:
Originally Posted by vengance_01
thermalright ultra extreme = teh w1n
yes true, but I bought this long before the Ultra 120 was out, let alone the extreme version.Quote:
Originally Posted by Origin_Unknown
Couldn't be said better :woot:Quote:
Originally Posted by Origin_Unknown
hey guys, new to the xtreme forums, but here is my rig!
http://www.overclock.net/gallery/dat.../computer7.JPG
thermalright ultra 120 extremeQuote:
Originally Posted by Origin_Unknown
thermalright ultima-90
tuniq tower 120
Scythe Ninja B (Plus) new revision
Scythe Infinity
the scythe beat all of them because its rated Silent PC .. check out silentpcreview.com cools + silent .. im gonna get a scythe ninja b + silenX 120mm fan 74cfm 18dba ..
Heatsinks don't make noise, fans do..
Hey! That would make a good bumper sticker!Quote:
Originally Posted by lawrywild
:clap:
http://img522.imageshack.us/img522/1463/pchn9.jpg
TT120 on the CPU, NV Silencer 6 on the 7900GT
Hello.
I have thermalright ultra 120 extreme is a good cooling with fans Sycthe 1600rpm and too have cooling for memory thermalright hr 07.
Here some pictures:
http://img244.imageshack.us/img244/8...tadonq8.th.jpg
Greetings!
I'm gonna order the Scythe Ninja Plus rev.B easy installation
Six 120mm fans (not including the PSU Fan)
two 80mm Fans attatched to a pci slot card holder to flow onto the Graphic card
http://i104.photobucket.com/albums/m...2/DSC00755.jpg
Temps run very cool. Stock Cpu at idle is 31C, the Graphic card idles at 47C. What do you guys think? :)
Me thinks you should get a Thermalright Extreme. Get rid of the fan by your hard drives---it isn't doing anything due to the small holes.
Brendan
i agree with the first bit....Quote:
Originally Posted by cyberspyder
BUT for the 2nd bit - just remove the gaps between the holes ;)
http://i104.photobucket.com/albums/m...2/DSC00753.jpg
(older pic of my case, before i did a bit of cable management)
My thought was because of the fan in the very front of the case blowing on the harddrives that it was probably not getting a lot of air so i thought to add another fan on the other side of the harddrive cage to help force air from one side to another.
I will look into the thermaltake extreme. Is that the full name of the heatsink? Or is it extreme volcano?
:shocked: :shocked: :shocked: YOU SAID THE T WORD!!!!!!! It's THERMALRIGHT Extreme, not T*********eQuote:
Originally Posted by WITHTEETH
Quote:
Originally Posted by cyberspyder
Forgive him. ;) He seems to be new to the game. :D
Some pics of my latest build for a friend:
The case has zero options to hide cables, so it doesnt look that clean, but I am very happy with the airflow. All components are in sime kind of airstream and the noise isnt really noise.
my new fileserver:
http://img398.imageshack.us/img398/4209/img6892jk9.jpg
^^ Neet
ask him to install the cables and lets see if neat will still be the best word for it ;)
fr3ak which case is yours?
:ROTF:Quote:
Originally Posted by WITHTEETH
I'm glad you didnt repeat that ;)Quote:
Originally Posted by cyberspyder
Quote:
Originally Posted by celemine1Gig
No, No... PitchForks at the ready lads!! :eek:
The case in the pictures is a Thermaltake Matrix VX.
The case I am using is a Antec Super Lanboy, but I am in the process of getting a new big tower to fit 2 watercooling loops in it.
That thermaltake case was kind of okay. I wouldnt have bought it, but the owner of the PC liked it. The front fan is kinda noisy, because its humming, the rest of the case is solid and I like the meshed and open front which allows good airflow.
Pull out the metal plated behind and it will be better.
I want to figure out how to hide the cables on my antec 900 ..
I dont know which other case 17.5-18.8" inches tall i would of gotten because there were really none that beat the flexibility. HDD Cages made me get this case really .. otherwise I would of prob goten the TT MidTower Armor. but anyways the Aurora was on my list until I saw the price.
Those Tuniq look sick.. they weigh like 2lbs or 4lbs ? I forgot
I gotta start looking for prices on the scythe ninja plus rev B
Behind the MOBO.
You will likely have to cut the wires and extend them.
Here is my rig:
http://img124.imageshack.us/img124/9...8xs5ac6.th.jpg http://img48.imageshack.us/img48/933...1qo9su0.th.jpg
C2D E6400
Asus P5B Deluxe
1GB OCZ Gold
XFX 7600GS
that boxedcooler. :slapass:
I know:doh:,but i will be moving to water soon:p:
water is good and cool. :up:
am i seeing ur top hard not installed correctly cause it is interfering with ur vga ?
Its installed right, but the PCI-E slot is low so i gotta put the HD at an angle for all 3 to fit heh.
Just bought the Lian Li expansion bay tho, so im gonna move the drives up to the 5.25" bays.
@ espionix: one xbox 360 next to the system. :slapass:
What? I have one next to mine too, a Ps3 as well :up:Quote:
Originally Posted by deepsilver
Today i decided to follow some advice of Highland3r and take my pc out of my case (that and my coolermaster atcs-201 is 5 years old and its showing its age a bit (4*80mm fans))
Here is the results
http://img14.imagevenue.com/loc741/t..._122_741lo.jpg
http://img9.imagevenue.com/loc1093/t...122_1093lo.jpg
http://img23.imagevenue.com/loc872/t..._122_872lo.jpg
some *shudder* SilenX fans blowing air over pwm's and RAM
http://img121.imagevenue.com/loc916/..._122_916lo.jpg
ive since added a 80mm fan to the side of my 120mm fan on the TR HR-03-Plus to cool the pwm's and anthing else that isnt covered by the 120mm.
http://img18.imagevenue.com/loc952/t..._122_952lo.jpg
All in all, ive shaved off 5-7 degrees off the full load temps!
Roll on TR IFX-14 and the lapping of the base / cpu
ive also just ordered two silverstone FM121's. one for cpu and one for gfx :D
i don't hold so much of this type, well i'm only a pc-gamer. ;)Quote:
Originally Posted by ChaosMinionX
Hehe, it's pretty much a Gears of War exclusive console :P
^^ What a hunk of crap.. :)
http://img528.imageshack.us/img528/6991/img7179ls4.jpg
my system with an 7800 gtx top from asus. :up:
here's my pc (if you can make it out :ROTF:) thermy armor case
http://img169.imageshack.us/img169/6167/dsc00135db5.jpg
custom silenxtrememaxlinetrio4000z™ fan mounts
http://img181.imageshack.us/img181/3696/dsc00132zc8.jpg
http://img53.imageshack.us/img53/2842/dsc00119ye3.jpg
Not just me eating at my PC :lol:
:mad: Not.. I had nothing but problems..Quote:
Originally Posted by deepsilver
just got my Scythe Ninja Plus Rev.B gonna take some pics :) + SilenX IXtrema 120 90cfm fan =)
http://img90.imageshack.us/img90/4160/apr290001zj4.jpg
http://img361.imageshack.us/img361/581/apr290003lk1.jpg
http://img240.imageshack.us/img240/4...n010005we7.jpg
http://img240.imageshack.us/img240/5...n010006vc3.jpg
http://img240.imageshack.us/img240/5...n010007pi5.jpg
http://img391.imageshack.us/img391/576/jun010008ap8.jpg
http://img479.imageshack.us/img479/3...n010009ht3.jpg
Silenx... *shudders*
Silenx... *shudders*Quote:
Originally Posted by lawrywild
what does this mean? good or bad?
It mean's that alot of use don't like Silenx very much... and thats putting it mildly
+1.Quote:
Originally Posted by Origin_Unknown
bad
my mess
http://shrani.si/thumbs/img010411rdg.jpg
http://shrani.si/thumbs/img010511rdh.jpg
suggestions? :D
why don't you face the infinity in line with the exhaust fan instead of the psu ? you can move the rams to the black slots instead of yellow for space. cable management needs work. what fan is on the infinity ? if its the scythe stock fan it will be sleeve and be weak to push air upwards horizontally.
yeah stock fan...
"why don't you face the infinity in line with the exhaust fan instead of the psu ?" well it's the way retention module is....
My Stacker:
http://img294.imageshack.us/img294/4683/panoramamk6.jpg
http://img294.imageshack.us/img294/9305/img0154py2.jpg
http://img171.imageshack.us/img171/1821/img0200sa0.jpg
Abit AN8-SLI
A64 Venice 3200 @ 2.6 (260x10 @ 1.5v)
Evga 7900GS
2x 1024Mb Patriot DDR500
ThermalRight XP-90 - AS5 (May lap CPU\HS sometime)
Zalman VF700-CU - AS5 (HS doesnt need lapping)
Stock Abit OTES Chipset cooling - AS5 (May lap the contact plate, add AS5 Epoxy to the plate\heatpipe connection)
Mods:
-Placed Plexiglass in bottom and side vents to prevent noise and dust buildup.
-Added aluminum rail onto ETX hole mounts, Used for cable management.
-Added holes in Motherboard for cables
-Painted Interior with textured black paint, texture is like 800 Grit sandpaper.
All fans are 5v / 7v
Its VERY quiet. I'm ~1 Meter away from it right now, And I can only hear my HD clicking every so often.
prospect: does that foam helps to lower noise and vibrations etc...
@ kevinbo03: realy nice uv-effects. :)
@ _Prospect_: is your case not a little bit too small?? :D
Here's mine -
These pics are with my previous mobo (P5N32-E SLI).. now i have switched to a DFI P965-S Dark, so i'll update some pics when i get time to take them =P
but here they are~
http://i98.photobucket.com/albums/l2...frontangle.png
http://i98.photobucket.com/albums/l2...inside_gfx.png
http://i98.photobucket.com/albums/l2...side_whole.png
http://i98.photobucket.com/albums/l2..._frontside.png
http://i98.photobucket.com/albums/l2...kbox_front.png
custom made 90degree angled power connectors~ oh yeh! =D
http://i98.photobucket.com/albums/l2..._optical_2.png
nice man, really clean comp you have there
wow, spooks does your pc actually look like that or is it some photoshoping?
lol nah its not photoshop. the photos just ended up like that maybe cause of my unsteady hand and the effect of the uv's =)
and also my :banana::banana::banana::banana: camera.. LOL =)
Very nice! Powdercoating or spray paint?
thanks mate! haha its just normal spray paint~ sanded my case back after i finished modding it, primed then painted away~ =D
@ spookz: realy nice uv-effects. :clap:
spookz
Very nice
Simplicity ;)
thanks mate! ;)Quote:
Originally Posted by bauer
Hi Im new to this forums!
My Air Cooled Stacker 830
http://i25.photobucket.com/albums/c5...4/IMG_1082.jpg
http://i25.photobucket.com/albums/c5...4/IMG_1083.jpg
http://i25.photobucket.com/albums/c5...4/IMG_1086.jpg
http://i25.photobucket.com/albums/c5...4/IMG_1087.jpg
http://i25.photobucket.com/albums/c5...4/IMG_1088.jpg
http://i25.photobucket.com/albums/c5...4/IMG_1089.jpg
Intel Core 2 duo e6400@ 3.0GHZ, Soon to be e6850
Zalman 9500AT, Soon to be Zalman 9700 NT to match the green theme
MSI P6N Platinum 650i motherboard
2 GBS Buffalo FireStix Memory @ 4-4-4-12 1t
2) EVGA 7900GT KO with Zalman vf 900's
Western Digital 500GB HD
OCZ 700 GameXStream Power Supply
CoolerMaster Stacker 830
BenQ 19in 2ms LCD monitor
please resize ur images specially since they are not very good looking due to bad camera
EDIT:
Thanks for the resizing and now we can figure out the look of ur system much better
i adore the 830
but an update from 6400 to 6850 is not the best bang for buck, i guess getting a Q6600 will be better or keep ur 6400 longer
Quote:
Originally Posted by SaFrOuT
Yes, that's true. Also helps for the ones that don't use a broadband connection.
But the system looks good, IMHO. Nice setup you got there.
I'm generally not much into looks of a system, but rather focused on its function and overclocking potential, but this does look nice IMHO, like many other systems posted here.
Welcome to the xtreme. :D
Nice rig spookz :clap:
Quote:
Originally Posted by SaFrOuT
I went into a deep thought, I built systems for the purpose of gaming. I play games online and need performance. I heard too many terrible cons of quad core on old and like new games. If games later on this year, take advantage of it, then I will certainly upgrade to it.
Maybe I will go with the e6750 for the 4mb cache. But the q6600 at $266 USD will be a great value.
My current rig that most I did on 1.4 vcore was 3.2 stable, without touching northbridge, link or any other voltage.
Oh BTW, sorry for the large pics, Its a Old Canon 4mp, my canon 8.1 is in used:(
Thanks for the comments.
http://i71.photobucket.com/albums/i1...-/SA400492.jpg
Nothing special, i'm not a handy photographer either sorry :P