Wow 42 C priming??!! Those phenom II cpus must run a lot cooler than i7...
Printable View
Wow 42 C priming??!! Those phenom II cpus must run a lot cooler than i7...
They do.Quote:
Originally Posted by cobra_kai
or SD might be cheating :D
Congratulations SNiiPE on the completion of Flow. Very professional, with a high quality finish at every level and an excellent video too. Looking forward to your next creation.
Finally got the Video to load - it was worth the wait! Very nice, Ian.
And - re the PII temps he reported - not cheating, that's just how cool they run with decent cooling. Only downside I see is no Hyperthreading, but that's not an issue for most applications.
can u post the vids on youtube?
I am having difficulties viewing them on the link you posted.
thx.
Sorry, I dont have them on youtube, but the high res version is a download, you shouldnt have any trouble with that :confused:
i had trouble at first. Below each video, is a link to the download. If you click it you should be able to just save it to your PC ;)
Well I think here is the best place to ask.
I would like to know which programme do you use to sketch your builds?
Or... just pencil and paper?
Thanks and sorry for the OFF.
for the initial design I used solidworks 2008 :)Quote:
Originally Posted by Osterman
for the Fan controller I used Pro/engineer , but I dont recommend that program unless you are very experienced.
Ahha ok Thanks!!.
I will see if I can get it, also I will try to get Autodesk Inventor. I was told that it is a good one also.
Also one last question, because I've just figured it out to my future mod. How large is the space you have between the mid plate and the motherboard inside of flow?? Taking the mirro I think you use there consideration and without it?
Because the case I want to get is pretty similar to yours, I want the PC-A20
youve got a little more than a half inch there, its not much but there is space to work with.
Flow has now been featured on Casemodblog.com by Bill Owen :)
http://www.casemodblog.com/?p=1236#more-1236
cheers Bill and thankyou for the kind words in the intro :up:
Hi mate you got any tips for making my own res?
You made an amazing job Sniipe, really :up:
In the A20, there's actually a bit less space - about 3/8".Quote:
Originally Posted by SNiiPE_DoGG
Where did you get SolidWorks from Sniipe? I've just recently tried Google Sketchup after having used SolidWorks all through highschool and my single year at college and came away utterly frustrated. Google Sketchup sucks. :shakes:
I got solidworks from my university ;) I have a friend who knows a hack for it but I dont have the info at the moment.
:yepp: I have a CAD program called TurboCAD7 from IMSI, it's a bit older (bought it in '97) and a free 3D game modeling program call GMAX which is also a bit outdated, both are still better than Sketchup IMO.Quote:
Originally Posted by W34513
the whole "bought" part is something i would like to avoid... :yepp: i have Solikworks 2007-2008, but its part of their programming that they quit working after one year...Quote:
Originally Posted by Waterlogged
I have TurboCAD15 that I picked up for 24.95. It's a nice program.. tons of options.. just trying to learn them all. The manual is like 200 pages thick.Quote:
Originally Posted by Waterlogged
Put the system up in the TPU case mod gallery :toast: I love the function and system this uses :up:
http://www.techpowerup.com/gallery/2315.html
Video on youtube :)
http://www.youtube.com/watch?v=WhqwUOmlKcU
This is the most impressive case I have ever laid eyes on...you attention to detail is beyond belief :up:
Nice Video ;)
Wonderfull work :up:
thanks miahallen :up:Quote:
Originally Posted by miahallen
thanks raceface :toast:Quote:
Originally Posted by Raceface
I got the new video card in the machine today and everything is working wonderfully, now to work on the CPU and get this beast benching :D
when are we going to see this at mdpc?
you wont see this at MDPC, the supreme council of sysprofile and their german biased membership has spoken :rofl:
Ian,Quote:
Originally Posted by SNiiPE_DoGG
Any specific reason why not? I really think this is worthy of MDPC, just seems better to me than tons of stuff on there. But of course, my word don't matter.
dont ask me, I didnt make that decision and there seems to be a lot of really odd decisions made as to why it will not be posted.... Currently I am writing up my Bit-Tech front page worklog though, I will post it when it is finished :up:
Looking forward to that ;)Quote:
Originally Posted by SNiiPE_DoGG
It's becasue they're working on a new site called "Billion Dollar PC" (bdpc)...and this project will be the first featured there :yepp: :p:Quote:
Originally Posted by Chicken Patty
:up: good thinking. How did I not figure that out ;). To me it should be on a BDPC if it was to exist. Like I've said, this build rocks my world!Quote:
Originally Posted by miahallen
i guess you need to have an mdpc sleeve in order to get accepted there :)
SNiiPE_DoGG
Excellent work Ian, I mean, really excellent! I am really impressed with flow!
I cound not resist to add your work gallery to my website: http://www.compinfo.ge/index.php?are...images&galid=9
And ofc I'm looking forward to your new concept ;)
Well not to take sides or imply that my opinion is valid.
Also taking away attitude or "bashing" from the perspective.
What flaws does this build have that doesn't live up to MDPC? The only thing I could think of was the wire management behind what you see. But I went and looked and most of the computers on there don't have pictures of their management behind the scenes. To me this build has innovation, something different.
I'm not trying to be mean or sounds cruel but is it because it doesn't have sleeving? I realized that all the wires in snipes build don't have actual sleeving(MDPC Sleeving), they have a different - out of the box - idea. Maybe thats why?
I don't know. I can't find any flaws in this build, everything from the photos to the presentation is beyond what I could ever do.
I don't think it could have been said better. Ian might not care, but we would like to know what he could have done to get it on MDPC, other than what you stated in your post, if that is ok to share with us Nils.Quote:
Originally Posted by Armitage
I don't even understand what the huge deal is about mdpc. Yea, there are some really cool and nice computers on there, but there are plenty of others that are just as nice that are not featured there. This project is clearly one of the latter, seeing as I have yet to see a negative comment about it and it is winning all kinds of awards on other sites. People should stop worrying about MDPC so much and just enjoy the awesomeness that is this project!
The main things were the easy ones:Quote:
Originally Posted by Chicken Patty
Bar-code and similar "non-aesthetically based" stickers on GPU, Pump, PSU. (super easy to fix, but if a person does not like to do it, because the photoshoot can't be done a second time, what can I do? Live with such unneccessary compromises that anyone can fix? Keep a system for a lifetime on a frontpage just because of a day of extra work that wasn't done? ... All other modders took the chance if they had one, because they did not feel attacked, they felt helped and they asked for opinions, not made their opinion themselves about how perfect they are)
The quick & dirty cut (and therefore not very beautiful) in the back of the tray. Another thing that could have been easily fixed by a highly motivated modder.
The rest is just a matter taste and therefore doesn't play a role in decisions, as long as it's not obiously ugly.
Any new rig just needs to be compared with the level that was shown in the last 2 systems. It was a great system, but it has these little things that could have been corrected easily. I guess everyone who turns his brain on a little bit will agree. And even the "first-day modder" would have been able to change it. And if he does like the stickers and hole, because it looks better than without / corrected, so be it. MDPC is a free site and if it doesn't motivate to go for "no-comprromise", then it's not me to be blamed I think.
Case closed for me.
big mistake nils, PMs are not allowed posted in the public forum.
I am sorry my life (going to college, couldnt retake the photos because I am ~200 miles from my home) got in the way of removing some pieces of paper that are barely visible. If I was a photo-shoppin man I would have just removed the stickers in the computer, you wouldnt be able to tell, but hey I leave the imperfections AND the PERFECTION for people to see.
Cant you ever take the high road and realize how completely insignificant a few serial number bar codes and power labels are? considering everything I have done in this build you are slamming it down over such a trivial thing.
As I have said before, I dont care, I have bigger things to do than a site like MDPC now. I have my own opinions about the whole situations that I wont post in the public, but needless to say, I would rather not show my work there in the future.
EDIT: lastly I did fix the cut on the back of the motherboard, I disassembled the entire build to do it too, I just never took a picture....
I am a bit up in the air about removing the barcodes as if something did happen, there is no way to RMA the part. Seeing MDPC is no compromise and the elite few, I guess i can see that being taken into account.
Anyways, It seems the decision has been made. No matter if this made it on MDPC or not, it is still an awesome build. Good luck with classes Ian. :up:
IMHO, Ian you have a build on MDPC atm. I think Nils is looking for more just like he was when Charles completed Daniel's Murderbox. Daniel's Murderbox was nitpicked as well. The concern has been put forth that Nils was showing favoritism for Charles. I believe he foresees you being able to add more builds to MDPC as each of your builds has been outstanding. Therefore, he wants to make certain that there isn't a chance for anyone to call favoritism on your builds.
Those are just my :2cents: :)
17. Private Messages (PM)
PMs are just that, private messages. Any member posting a PM to the boards without express prior written permission from the site owner(s) will be immediately dealt with, and the post will be deleted. Spamming to PM boxes is earn you a permanent ban.
Let's not derail this great build-log with squabbling. Please handle this in PM and keep it in PM or agree to disagree and leave it at that.
Beautiful work done on that case, especially that front door. Any chance it'll all be consolidated into one post or a link to such post if it is available?
yes, I am working on that now, you can see it at casemodblog.com though where I wrote up a 1400 word build description :)Quote:
Originally Posted by [XC] gomeler
Sniipe.... Are you coming to the gxl!?!?!?
I wanna see this beast up close during the case mod competition.
http://www.thegxl.com/index.php?
amazing job!
Hi
Well, sorry Ian but IMHO this build doesn't deserves the MDPC.
I also own a V2110 and for sure the cable magnament its a PITA, but i think there were more elegant solutions for the power cables on the GPUs and the dual pumps.
A 120.4 rad would look better than the 140.3.
The tops on the DCCs should be acetal or plexi, not mixed.
You should put some sleeving on the fans
Also the cover on the back of the 5.25" bays breaks the no compromise rule.
And the most noticeable thing, the stickers on the pumps, GPUs and PSU.
I know this are just little details, and many of them are subjective, but it isn't perfect, what MDPC claims for.
But damn, even not being on MDPC this is still a very great and innovative system.
Congrats Ian :up::up:
I am signed up! and I do want to bring it down, but the fact that it is on haloween weekend is a big deal for me... thats one of our largest parties in the fall on sat and also one of our largest fundraisers for charity (we turn the fraternity house into a crazy haunted house and hundreds of people ususally come to see it), very important to me, but we will see.Quote:
Originally Posted by drizzt5
First, I believe that Ian's build was outstanding and have said so multiple times.
Second, what needs to be considered here is that MDPC judges builds at its sole discretion and owns the right to display any select PC that it wants. None of us have any right to tell Nils what he should and should not let into MDPC. It's his idea in the first place, and his idea is largely responsible for some of the amazing builds that have been presented here recently. If anyone wants an absolute "fair" judging panel then take your project somewhere that the deciding factor doesn't come down to a single individual and his close peer group. Enter your rig into a contest where the judging is based strictly on public voting instead.
Third, as much as I hate to say it (because I do believe that Flow was a great accomplished work of art and far better than anything I have ever done,) there were compromises on this build that were made public. The nibbler job on the motherboard tray, although I respect Sniipe for being up front and honest in showing it, was a major distraction from the rest of the build which was approaching flawless. So was the initial wiring job. There were obviously factors such as the time that Sniipe had to work on it, but Nils shouldn't be chastised for these things because they are not of his concern. He's clearly stated what his objective is, which is "no compromises," and if someone does not follow that advice to be advertised on his site, then on what basis do we lay blame at him for following through with his objective?
Fourthly, if you're trying to get your rig displayed on MDPC, then it's probably not a good idea to get yourself in petty spats with the site owner like Sniipe has done on a few occasions. Tends to create a little friction and may impact future decisions that are made.
And lastly, although I respect MDPC and its intent, a build is not a failure if it doesn't make it on there, and some of us need to realize that. If by chance I build a PC that makes it into several blogs and magazines, as it appears that Flow is, then I myself would consider that a great accomplishment and just move onto the next project.
Sniipe, Flow is truly the most incredible build i have ever laid eyes on. I guess some people just fail to think about the time constraints that you had, and the fact that you fixed the "flaws" afterwards.
All in all, i thoroughly enjoyed following your log as you build this masterpiece and hope you continue to share your skills with us in the future. :clap::clap::clap:
Ah, I understand. If your not too busy I'll chat you up on steam about some stuff.Quote:
Originally Posted by SNiiPE_DoGG
Quote:
Originally Posted by dualbrain
Thank you for the information Nils.
Let's keep MDPC discussions out of this thread. Thanks.
um sorry to resurect but has anyone seen snipe lately ?
he said hed help me with some things :/
Send him a PM. I believe he is back at university, so probably a bit busy. I have seen him post from time to time though.Quote:
Originally Posted by pingpong1455
just saw FLOW in CPU magazine this weekend. Congrats man on the placement. It was located in the write-up for the Noreaster LAN.
i pm'd him friday i think, and he got back to me in like 5 minutes. so, he's around. just not really out in the open, lol. Sniipe's skulking around XS somewhere... :rofl:
I am only on at very limited times lately and if you PM me when I am sitting at the computer with time then you might get lucky and get a response....
Sorry to sound like an ass, but I have a life, responsibilities, and school to deal with right now. I wish I could help every person with every build and work on designs but as of right now I do not have the time to give away as charity. I dont even have time to design my own new build right now never mind any others.
thanks to all who have complimented me and followed this build, as I have said before you can keep an eye out for it in CPU magazine (maybe as a mad reader mod with the cover) and at the bit-tech.net front page :) otherwise this is pretty much finished up.
IF I can get my design going sometime soon, you will see a worklog pop up for my next build ElementX
Once again thankyou, and peace out from Project Flow
-Ian
No worries Sniipe, we all understand. :yepp: Life sometimes takes time away from our hobbies and activities. Thanks for taking the time to share your mad skillz with us.
Isn't responsibility fun? :rofl::rofl::rofl:
CPU Mag feature for winning the mod contest - still might be on the cover for mad reader mod if I get selected
http://img24.imageshack.us/img24/5236/cpumag.jpg
Congrats on the CPU Mag. :clap: That was certainly well deserved.
Tell us, how does it feel to win an i7 with an AMD rig? :p:
:rofl: :ROTF: :rofl:Quote:
Originally Posted by faster3200
~Bex
so they comment on the 24pin being sexy and the nickle plated ram but they dont give a pic and there is all of that white space
Saw the rig in CPU mag! Looked great on there Ian, the jpeg doesn't do it justice!
Quote:
Originally Posted by SNiiPE_DoGG
+1 :)Quote:
Originally Posted by W34513
So I have a very unexpected :woot: to finish off this thread!
I just got an email from Crucial that they sent out 8gb of Blue Tracer ddr3-1600 c8 ram for Flow! I honestly didnt expect it but I will try to get some sort of media (hopefully video) up of the RAM in action :rocker:
:up: sweet dude, congrats on that and I'll be waiting for the vid :p:Quote:
Originally Posted by SNiiPE_DoGG
that's sooo friggin awesome about CPU mag and the Crucial RAM S_D! :clap:
Every time I think this thread couldn't get any better, it keeps on truckin.:ROTF:
Wow, very cool. Congratulations, Ian! :clap:
Congratz! I know you are busy but I still hope by some miracle you are able to make it to theGXL :up: I wanna see it myself tbh.
Would ElementX features Striped tubing by Rit Dye? :p:
Great build, great worklog, and awesome video mate :)
Congrats on the CPU coverage, and the RAM!!
Hello Sniipe
I just finished reading the whole worklog .... and i'm out of breath .. this is just amazing -
I have posted your rig on our french forum and peeps are also stunned
Congrats again - i hope to have time in a second life to do the half of your work
Merci beaucoups pour votre felicitations Cubensia
Est ce que vous me donnez la link de site web vous avez affiché ma ordinatuer? Je parle un peu de francais, et je voudrais li les remarques :) Merci :up:
Starting from here
http://forum.hardware.fr/hfr/Overclo...7.htm#t1936756
You know what ? I'm in love :D
tell them I give them great thanks for the compliments :) nice thread you guys have going there :up:
french is tough for me, but i read better than I speak ;)
Hey Snipe :D How is college?
Hey Nat, long time no see! College is great, I love living in the fraternity house and my room is awesome :p: got a physics II test tomorrow that requires quite a lot of studying :ugh:
How's Flow running? Got the replacement 4890 installed yet?
Eww Physics! What are you studying? :)
old news, bro
*cries*
Hi guys :sofa::toast:
I have ideas brewing, they've been brewing for a while. We'll see what happens in the next few months but I am starting to design again.
Good to see you back dude. :up: Can't wait to see what you got cooking.
looking forward to it :)
+1 :up:Quote:
Originally Posted by jordan-com
featured your build for today's #fridayflashback, https://www.facebook.com/Mnpctech/po...29946323752732
Super cool build
Thanks Bill and Lead Head,
Sad that all the pictures are gone, I dont think I even have them anymore...