best super pi times?

Printable View

Show 100 post(s) from this thread on one page

09-18-2004, 12:31 PM
cetoole

1 Attachment(s)

Athlon XP-M 2600 SP-97+Tornado
09-18-2004, 01:36 PM
Hilppa

Quote:

Originally Posted by Tom Holck

Well Hilppa nice, but I think I need an upgrade in 8M M8 :D

Yes thats on a F53, and still the old 940 and the ECC ram:

the ramvolt is close to 4 volt on the SK8V

Yes I know my time sucks for that clockspeed, but what can you do.
If i knew how to tweak my software better I'd be close to 4:30, as you can see in the japanese SuperPi8M ranking (where 5300Mhz did 4:30 on the same processor). Glad you have such a great score on your FX-53, too bad it costs as much as i earn in a month :( My 2.8A cost about 160€ :banana:
09-18-2004, 01:40 PM
aoc007

Quote:

Originally Posted by Hilppa

I don't know what you mean by 4:5 bios?

I use 1:1 memdivider, so that CPU is 250Mhz and mem is 250Mhz.

If you mean 533Strap, I was not able to use it after about 4,8GHz.
I had to change to 800strap to make it all the way to 5,2Ghz, which is bad because 533strap is so much faster.

If anyone can tell me why I was not able to use 533strap, please tell me :confused:

There is a special bios than runs memory faster than fsb I think its 4:5 ratio.
09-18-2004, 01:45 PM
Hilppa

Quote:

Originally Posted by aoc007

There is a special bios than runs memory faster than fsb I think its 4:5 ratio.

Yes I am aware of that, and with IC7-G it is possible to do that without any special Bios. However, I have not yet found memory that does 248Mhz x (5/4) = 310Mhz with timings 2-2-2-5. If you do, please let me know :stick:
09-18-2004, 04:35 PM
Verdict

i drive some test with +12c water and i think im ready to use some
xtreme cooling, next week i get LN2 and lets see what i can do with that

http://www.kotinet.com/marko.ahola/p...m_550/5_16.JPG
09-18-2004, 08:36 PM
hipro5

Quote:

Originally Posted by Hilppa

Yes I am aware of that, and with IC7-G it is possible to do that without any special Bios. However, I have not yet found memory that does 248Mhz x (5/4) = 310Mhz with timings 2-2-2-5. If you do, please let me know :stick:

Get this..... hipro522.rar bios....
09-18-2004, 08:37 PM
hipro5

Quote:

Originally Posted by Tom Holck

Well Hilppa nice, but I think I need an upgrade in 8M M8 :D

Yes thats on a F53, and still the old 940 and the ECC ram:

the ramvolt is close to 4 volt on the SK8V

:D

:toast:
09-18-2004, 10:45 PM
aoc007

Quote:

Originally Posted by Hilppa

Yes I am aware of that, and with IC7-G it is possible to do that without any special Bios. However, I have not yet found memory that does 248Mhz x (5/4) = 310Mhz with timings 2-2-2-5. If you do, please let me know :stick:

Sorry didnt notice that your ram was that high and I didnt think how much 4:5 would increase it.... :rolleyes:
09-19-2004, 06:50 AM
Verdict

Quote:

Originally Posted by hipro5

Get this..... hipro522.rar bios....

and what happend if i but this IC7 MAX3
09-19-2004, 07:36 AM
shidokanjohn

1 Attachment(s)

With my new 3.0 D0
09-19-2004, 07:55 AM
hipro5

Quote:

Originally Posted by Verdict

and what happend if i but this IC7 MAX3

No go........Another bios for Max3 series...... :)
09-19-2004, 07:57 AM
hipro5

Quote:

Originally Posted by shidokanjohn

With my new 3.0 D0

He,he,he.....There you go Shido..... :D :toast:
09-19-2004, 08:37 AM
The Stilt

Quote:

Originally Posted by hipro5

No go........Another bios for Max3 series...... :)

It worked just fine with Max3.
Now it´s Max3 friendly ;)

Hipro5 Bios 22 for IC7-Max3
09-19-2004, 08:40 AM
shidokanjohn

Quote:

Originally Posted by hipro5

He,he,he.....There you go Shido..... :D :toast:

:toast: :toast: :toast:
Thanks George my friend.
09-19-2004, 08:55 AM
hipro5

Quote:

Originally Posted by The Stilt

It worked just fine with Max3.
Now it´s Max3 friendly ;)

Hipro5 Bios 22 for IC7-Max3

:D :D
09-19-2004, 04:01 PM
aoc007

Quote:

Originally Posted by hipro5

No go........Another bios for Max3 series...... :)

I remember reading a post that you had used a IC7-G bios on a IC7-MAX3 because it was faster?
09-19-2004, 06:26 PM
stupid_bugs

hi guys

im get 53/s with P4 2.8 but other people in amd with 2000 Mhz clock looks better !!

so what the program depend on .. cause looks like not the more Ghz get lower seconds
09-19-2004, 06:34 PM
aoc007

AMD uses more instructions per clock cycle so it takes less Ghz for them to equal a higher clocked Pentium 4, you need to overclock ;)
09-19-2004, 09:15 PM
hipro5

Quote:

Originally Posted by aoc007

I remember reading a post that you had used a IC7-G bios on a IC7-MAX3 because it was faster?

You can do it but I did it with the 2.8Vdimm MAX on it.......I do not know if the 3.2Vdimm that the Max3 has , will work though......If you mod your Max 3 with Vdimm , VTT ,and within bios play up to 2.8Vdimm , it'll work.....I haven't tested if it does works with unmoded Vdimm......... ;)
09-19-2004, 10:12 PM
aoc007

Quote:

Originally Posted by hipro5

You can do it but I did it with the 2.8Vdimm MAX on it.......I do not know if the 3.2Vdimm that the Max3 has , will work though......If you mod your Max 3 with Vdimm , VTT ,and within bios play up to 2.8Vdimm , it'll work.....I haven't tested if it does works with unmoded Vdimm......... ;)

Ah I see, thanks.
09-20-2004, 03:34 PM
stupid_bugs

ummmm, thanks aoc007 :)
09-21-2004, 05:38 AM
shidokanjohn

1 Attachment(s)

And finally under 30 :)
09-23-2004, 02:13 PM
macci

Almost 24sec (thanks to The Stilt's tweaks) :D

http://www.akiba-pc.com/775/spi1m_5400_25s.gif

3.6E + LN2 + Team Akiba
09-23-2004, 02:28 PM
aoc007

Wow, can you get a ES? WR is still 23s right? ;)
09-23-2004, 02:33 PM
funkflix

Nice :banana:

But SuperPi loves Bandwith, i think with 300 1:1 and bit slower timings
u will get the 23 ;)
09-23-2004, 02:38 PM
LardArse

Wow macci! That a 865 with LGA board? Awesome man
09-23-2004, 02:49 PM
GomerPyle

Stunning result Macci :eek:

OT: fix your hp's forum Macci :)
09-23-2004, 11:18 PM
Hilppa

P4 2.8A
Abit IC7-G (fully modded)
KHX3200 2-2-2-5

http://www.takorautaa.net/img/tuloks..._superpi1m.jpg

same time from Finland also ;) ...

...With the slight difference that I'm able to run SuperPi 8M at 5,5GHz :banana:

oh, and no silly tweaks :p:
09-24-2004, 02:10 AM
macci

That 2.8A of yours is just plain silly :D
Awesome :toast:

What kind of speeds does it do aircooled??
09-24-2004, 04:40 AM
cold_ice

Awesome times on this page :eek:

@hilppa: Is this 2.8a a SL7K9?
09-24-2004, 09:27 AM
Learn

macci & Hilppa nice number here :toast:
and pretty near 24s

http://www16.big.or.jp/~bunnywk/cgi-bin/superpi.cgi
09-24-2004, 10:08 AM
ant1

1 Attachment(s)

New rig:
09-24-2004, 12:55 PM
Hilppa

Quote:

Originally Posted by macci

What kind of speeds does it do aircooled??

With stock-cooler it did something like 3800mhz-4000mhz, I really didn't test it much without dice or LN2.

Quote:

Originally Posted by Cold_Ice

@hilppa: Is this 2.8a a SL7K9?

No, it's SL7D8. Im still looking for a SL7K9 chip :( Even though this one overclocks quite nicely :slobber:

I should easily break 4min 20seconds in SuperPi8m, since I'm able to bench it at 5,5GHz. Also breaking 24seconds in superpi1m shouldnt be a problem, but I'm not that good with tweaking OS. Thank you all for your comments!
:toast:
09-24-2004, 06:21 PM
NoX

OMG! The Japs are going to lose the WR. :D
09-25-2004, 12:10 AM
TASOS

1 Attachment(s)

2.8E SL7KA D0 stepping.
09-25-2004, 02:31 AM
Verdict

is this good :D

http://www.kotinet.com/marko.ahola/p...m_550/4_43.jpg
09-26-2004, 08:42 AM
Verdict

http://www.kotinet.com/marko.ahola/t...ek_5400mhz.jpg

:toast:
09-26-2004, 08:53 AM
Learn

Nice One, Congrats Verdict :toast: :D
09-26-2004, 09:23 AM
cold_ice

very good :-) LN2?
Do you work at Linde Gas?
09-26-2004, 09:51 AM
Dissolved

is there a tool to get tenths of a second in superPI?

i think i saw someone useing it..
09-26-2004, 10:01 AM
Five-Seven

http://www.forumdeluxx.de/gallery/data/500/98061m.JPG :stick:
09-26-2004, 10:30 AM
Learn

Quote:

Originally Posted by Dissolved

is there a tool to get tenths of a second in superPI?

i think i saw someone useing it..

that? :stick:
http://xtremesystems.org/forums/show...&postcount=777
http://xtremesystems.org/forums/show...715#post492715
09-26-2004, 10:44 AM
Dissolved

Quote:

Originally Posted by Learn

that? :stick:
http://xtremesystems.org/forums/show...&postcount=777
http://xtremesystems.org/forums/show...715#post492715

thanks.
09-26-2004, 11:21 AM
Electroid

Team results, low fsb :(

1M: 31s @ 3249MHz
8M: 5min 55s @ 3205MHz

AXP-M 2500+
DFI Ultra Infinity
LN2
09-26-2004, 09:53 PM
coop

2 Attachment(s)

Here is a best for me, I finally got a 35sec !! LanParty 2600-m 2-256 xms 3500 h2oCool
09-27-2004, 01:36 AM
FDM

35s is the fastest I can go it seems
http://www.finaldrivemagazine.com/andy/superpi.jpg
09-27-2004, 08:21 PM
bachus_anonym

2 Attachment(s)

here's my go at 1M (35'') and 16M (14'39'')...

DFI Infinity Ultra, XP-M 2500+ and some 2x256M KHX .:. not yet modded .:. air cooled .:.
09-28-2004, 09:00 AM
Zeus

1 Attachment(s)

Finally shaved off another second, still a weak A64 score but only on plain water.
09-29-2004, 04:51 AM
HKY

1 Attachment(s)

Here is my 29 sec run :
09-30-2004, 12:48 PM
Ubermann

1 Attachment(s)

Best i can get with an CH that does max 2.4 gig.
09-30-2004, 02:19 PM
robocopy

1 Attachment(s)

32s with my 3500+@2615MHz
10-01-2004, 07:17 PM
coop

3 Attachment(s)

After many restarts and and a 619121 and 619c18, it is back to 1/21 orig. Did 2.56 4M and 6.27 8M on my Lp IIb 2600-m xms3500 wuu-hoo !
10-02-2004, 05:04 AM
derbis

1 Attachment(s)

get another second :)

XP2600+ @ 2651MHz
2x256MB Samsung PC3200 CL3 @ 230MHz CL2.5-3-3-11
Abit NF7 Rev1.2
10-02-2004, 07:46 PM
coop

1 Attachment(s)

34sec. for the coop
10-03-2004, 12:24 AM
Mauri Antero

My first day run with FX-53 1:1 devider but sloow mem timings.
http://netti.nic.fi/~jhermune/27.JPG

In Finland we have this thing called REILU MEININKI
10-03-2004, 01:12 AM
ahfung

1 Attachment(s)

Athlon XP 1800+ oc to 2715MHz

My watercooled 1800+ oc to 2715MHz, with 512MBx2 CH5 2-3-2-11 1T

SuperPi 1MB = 39sec
10-03-2004, 03:56 AM
chikitano

Hello, this is what I can do with the computer of my sister
http://img48.exs.cx/img48/1758/12916.th.jpg

it hurts that mobo single can give 1.8v vcore and 2,6 vdimm

Salu2.
10-03-2004, 04:30 PM
computer_geek

kingmax ddr433@480 cas 2.5.3.3.11 3.12v cpu11x240@2640ghz

ron@ttyp0[yoper]# ./super_pi 20
Version 2.0 of the super_pi for Linux OS
Fortran source program was translated into C program with version 19981204 of
f2c, then generated C source program was optimized manually.
pgcc 3.2-3 with compile option of "-fast -tp px -Mbuiltin -Minline=size:1000 -M
noframe -Mnobounds -Mcache_align -Mdalign -Mnoreentrant" was used for the
compilation.
------ Started super_pi run : Sun Jan 4 05:31:17 CET 2004
Start of PI calculation up to 1048576 decimal digits
End of initialization. Time= 0.460 Sec.
I= 1 L= 0 Time= 1.450 Sec.
I= 2 L= 0 Time= 1.710 Sec.
I= 3 L= 1 Time= 1.660 Sec.
I= 4 L= 2 Time= 1.680 Sec.
I= 5 L= 5 Time= 1.620 Sec.
I= 6 L= 10 Time= 1.670 Sec.
I= 7 L= 21 Time= 1.700 Sec.
I= 8 L= 43 Time= 1.700 Sec.
I= 9 L= 87 Time= 1.660 Sec.
I=10 L= 174 Time= 1.710 Sec.
I=11 L= 349 Time= 1.700 Sec.
I=12 L= 698 Time= 1.630 Sec.
I=13 L= 1396 Time= 1.650 Sec.
I=14 L= 2794 Time= 1.600 Sec.
I=15 L= 5588 Time= 1.660 Sec.
I=16 L= 11176 Time= 1.580 Sec.
I=17 L= 22353 Time= 1.620 Sec.
I=18 L= 44707 Time= 1.600 Sec.
I=19 L= 89415 Time= 1.490 Sec.
End of main loop
End of calculation. Time= 32.870 Sec.
End of data output. Time= 0.120 Sec.
Total calculation(I/O) time= 32.990( 0.810) Sec.
10-04-2004, 12:01 AM
cpulloverclock

Simply awesome

CPU : Pentium4 550 (E0 Steping Rent by HONBU ) , V Core1.5875V
Cooling : EVERCOOL Water Cooler WC-201+Aguri stops simply!
M/B : ABIT AA8-3rd Eye (i925X)
Memory : CORSAIR XMS2-4200v1.1 CM2X256A(Twin2X) 256MB (Dual)
OS : Win Net-Server 2003 iAg‰ü with Team AB-Boy+SP+Special Thanks TD!j
Room temperature : 15Ž

http://members.jcom.home.ne.jp/aguri...7-pi1M26sl.png
10-04-2004, 03:40 AM
chikitano

Hello, With my p4

http://img32.exs.cx/img32/9453/13452.th.jpg

I hope to lower it when it has the Rl....

Salu2.
10-04-2004, 04:14 AM
hipro5

Quote:

Originally Posted by cpulloverclock

Simply awesome

CPU : Pentium4 550 (E0 Steping Rent by HONBU ) , V Core1.5875V
Cooling : EVERCOOL Water Cooler WC-201+Aguri stops simply!
M/B : ABIT AA8-3rd Eye (i925X)
Memory : CORSAIR XMS2-4200v1.1 CM2X256A(Twin2X) 256MB (Dual)
OS : Win Net-Server 2003 iAg‰ü with Team AB-Boy+SP+Special Thanks TD!j
Room temperature : 15Ž

.......you mean : CORSAIR XMS2-4300 right?......

Timings of the rams??........multi.....?.......
10-04-2004, 04:34 AM
cpulloverclock

Quote:

Originally Posted by hipro5

.......you mean : CORSAIR XMS2-4300 right?......

Timings of the rams??........multi.....?.......

dont know

http://members.jcom.home.ne.jp/aguri...pilank_001.htm

Have u ever seen that?
They are 3 to get 23s...
Newbeetle, Memesama and Tam (22s possible)

http://u-san.net/c-board/file/560-5741-23.gif

http://homepage2.nifty.com/NewBeetle/23S.gif
10-04-2004, 05:58 PM
ahfung

Just shave off 1 sec, a small personal record..

Just another watercooled A64 3200+

http://www.hkepc.com/bbs/attachments...s_a64_2606.gif
10-04-2004, 10:44 PM
Zeus

ahfung, pic is not working here.
10-05-2004, 12:06 AM
cpulloverclock

In WATER COOLING BY AGURI

http://members.jcom.home.ne.jp/aguri...p838_rank4.htm

CPU : Pentium4 550 (E0 Steping Rent by HONBU ) , V Core1.5875V
Clock(MHz) F 4420.0@,@FSB(MHz) F 260.0
Cooling : EVERCOOL Water Cooler WC-201+Aguri stops simply!
M/B : ABIT AA8-3rd Eye (i925X)
Memory : CORSAIR XMS2-4200v1.1 CM2X256A(Twin2X) 256MB (Dual)
OS : Win Net-Server 2003 iAg‰ü with Team AB-Boy+SP+Special Thanks TD!j
Room temperature : 15Ž
http://members.jcom.home.ne.jp/aguri...pi8M4m57sl.png
10-05-2004, 02:32 AM
ahfung

Quote:

Originally Posted by Zeus

ahfung, pic is not working here.

Should be ok by now...
10-07-2004, 01:16 AM
yotomeczek

My record (DFI NF3)

http://members.lycos.co.uk/yotomecze...to%20small.JPG[/QUOTE]
10-08-2004, 02:32 AM
Mauri Antero

Small improvement to my 8M time with FX-53 khx3000 and GB k8nsxp-939 cooled with Prometia machII r404 modded by macci

http://netti.nic.fi/~jhermune/453.gif
10-08-2004, 09:03 AM
LBJGH

cool, that's what I get with my clawhammer a64 @ 2.2ghz.

Quote:

Originally Posted by ahfung

My watercooled 1800+ oc to 2715MHz, with 512MBx2 CH5 2-3-2-11 1T

SuperPi 1MB = 39sec
10-08-2004, 08:12 PM
dragonhunter

1 Attachment(s)

32 sec for me :banana:
10-09-2004, 03:34 AM
ahfung

Quote:

Originally Posted by LBJGH

cool, that's what I get with my clawhammer a64 @ 2.2ghz.

Oh well I might redo it later coz now I've a BH6 which shall do 2-2-2, once I got my cascade on the 1800+ again! :D
10-09-2004, 04:54 AM
LBJGH

I was given ya a compliment bud... that is amazing from an old t-bred. :toast:

Quote:

Originally Posted by ahfung

Oh well I might redo it later coz now I've a BH6 which shall do 2-2-2, once I got my cascade on the 1800+ again! :D
10-09-2004, 09:03 AM
Learn

1 Attachment(s)

Sempron 2500+ 37s liquid chilled 17°c
10-09-2004, 10:49 AM
webwilli

1 Attachment(s)

31 sec with slow prescott :cool:
10-09-2004, 05:52 PM
Nikita

XP-M 2400+
NF7-S v2.0

http://home.swiftdsl.com.au/~npolias...super%20pi.jpg
10-10-2004, 06:24 AM
detonator

thate 26" at 4420 are pretty ..:):rolleyes:
my 28"
http://www.tombraiders.it/public/1mega28.jpg.JPG
10-10-2004, 08:04 AM
macci

Now awfully close to 23sec :D
http://www.akiba-pc.com/2.8A/24s_5498.gif
2.8A (D0) @ 5498
LN2

Gets 24sec already at 5337MHz so another 20-50MHz and it would be 23s :P
10-10-2004, 08:10 AM
eva2000

holy crap macci that's nearly 100% oc :eek:
10-10-2004, 08:55 AM
detonator

Quote:

Originally Posted by macci

Now awfully close to 23sec :D
http://www.akiba-pc.com/2.8A/24s_5498.gif
2.8A (D0) @ 5498
LN2

Gets 24sec already at 5337MHz so another 20-50MHz and it would be 23s :P

camon kick the jappo;)
10-10-2004, 09:50 AM
mg84

Quote:

Originally Posted by macci

Now awfully close to 23sec :D
http://www.akiba-pc.com/2.8A/24s_5498.gif
2.8A (D0) @ 5498
LN2

Gets 24sec already at 5337MHz so another 20-50MHz and it would be 23s :P

great result :)
10-11-2004, 08:35 PM
|RickY|

this board is realy bad on v-core :S this cpu can do 3.5 easy on superpi on asus a8v becouse it goes nice to 1.95v, with gigabyte its hard to get better than 3.45 @ the best of 1.8v :S

http://ricky.home.sapo.pt/fx53/superpi24s.JPG
10-12-2004, 12:56 AM
DudeMiester

Wow, very nice!

I definitly need a new rig soon. 1min superpi is t3h sux :(
10-12-2004, 02:44 AM
Mauri Antero

3 Attachment(s)

Well this is my Gigabyte K8NSNXP-939 with V-core modded. Unfortunatelly got only Prometia Mach II r404 modded.V-Core Mod pic 1.75M
10-12-2004, 05:02 AM
Learn

Quote:

Originally Posted by macci

Now awfully close to 23sec :D
http://www.akiba-pc.com/2.8A/24s_5498.gif
2.8A (D0) @ 5498
LN2

Gets 24sec already at 5337MHz so another 20-50MHz and it would be 23s :P

nice 8M also
10-12-2004, 05:22 AM
|RickY|

Quote:

Originally Posted by Mauri Antero

Well this is my Gigabyte K8NSNXP-939 with V-core modded. Unfortunatelly got only Prometia Mach II r404 modded.V-Core Mod pic 1.75M

my mod is like yours, but if i pass 1.8v i'v reboots... on asus 1.95v is ok and cpu likes it :D
10-12-2004, 08:29 AM
Madril

Get a ABIT ... be a Man Ricky :P

GL m8
10-12-2004, 01:16 PM
Burner Man

simpy the best... :D
Congrats Sami! ;)
10-13-2004, 02:10 AM
kinder

http://utenti.lycos.it/kinderboy/3500+@11x262%201M.GIF
10-13-2004, 03:42 AM
CodeRed

My new FX53 with R507 modded prom....

http://home.exetel.com.au/codered/fx53/superpi26.jpg
10-14-2004, 03:31 AM
ahfung

Post it while still hot, I just managed to do this a few minutes ago:

AMD A64 3200+ 1MB L2 CG stepping S754, at 9x300 = 2.7GHz, watercooled.
DFI Lanparty UT nF3 250Gb

Corsair TWINX XL 512MB with Samsung TCCD, running at DDR600 2.5-3-3 1T

http://www.hkepc.com/bbs/attachments...ccd_ddr600.gif
10-14-2004, 08:56 AM
BiKEKiNG

1 Attachment(s)

My "HUMILDE" score

I have athlon64 2800+
Overcloked to 2345 MHZ
10-14-2004, 11:36 AM
mcnbns

1 Attachment(s)

Here's mine. XP-M 2500+ @ 2.8GHz, PC3500EB 3-2-2-9 @ 2.9V. No vmods and CPU on plain water. I don't think 36s is terribly poor for such a low FSB. :banana:
10-15-2004, 08:20 AM
chikitano

My p4 again...

http://img98.exs.cx/img98/3323/Dibujo2.th.jpg

Salu2.
10-15-2004, 02:34 PM
CodeRed

Quote:

Originally Posted by Mauri Antero

Well this is my Gigabyte K8NSNXP-939 with V-core modded. Unfortunatelly got only Prometia Mach II r404 modded.V-Core Mod pic 1.75M

Mauri, thats a very nice set of results you have there :toast:

That Vcore mod is unusual, you seem to be using pin 11 (Iout) instead of pin 10 (feedback) ???????
10-15-2004, 04:03 PM
perkam

chikitano, how did you get a 19s super pi with under 4ghz, ive seen ppl go 4500 with the new 775s and get 25s

kinder, you're putting life back into 3500+ sales (see "My 3500+ can only do 2.4" Thread)

Perkam
10-15-2004, 05:21 PM
Iridium192_217

its amazing how much things have changed since amoeba first posted that. I mean back then, a 4 Ghz P4 was a big deal.
10-15-2004, 08:15 PM
perkam

Back then, Intel was also still competing with AMD, unlike now
10-16-2004, 08:37 PM
Sucka

Here is my best.

Abit ic7-max3
SL7KB 3.0E D0
1024 OCZ-pc4000
PCP&C 510 dlx
Air cooled SP94

http://sevenlabs.net/sucka/pictures/superpi4.jpg
10-17-2004, 03:47 AM
macci

Quote:

Originally Posted by CodeRed

That Vcore mod is unusual, you seem to be using pin 11 (Iout) instead of pin 10 (feedback) ???????

Pin 10 and 11 are connected together on Gigabyte mobo.
10-17-2004, 03:53 AM
CodeRed

Quote:

Originally Posted by macci

Pin 10 and 11 are connected together on Gigabyte mobo.

Ahh thanks, never thought to check that :D

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 12:04 PM.

XtremeSystems