^^^ Let me know if you need some help cleaning up your room. ;)
^^^ Let me know if you need some help cleaning up your room. ;)
heh :D just need to find a moment in which i'm not procrastinating.. ;)
i read/looked through all those pages and there are definately some über-Xtreme setups shown :slobber: coo thing to be here =)
not overly extreme, but does bench with the 939's....and hey, it's almost all low-quality thermaltake, down to the ram heatspreaders! :stick:
cadaveca - The first picture reminds me of the good ol' days when I used to go to raves and techno clubs. :D
Merlin - By the way, welcome to XtremeSystems! :toast:
thx :toast:
cadaveca, "....and hey, it's almost all low-quality thermaltake, down to the ram heatspreaders!"
that sounds like you think thermaltake produces crap? judging by your 05 score @stock cpu(why?) and the pics that surely is relative, right? ;) i would be happy to have such a clear watercooling setup (or any g) :)
Thermaltake stuff is crap. It's the abit/asus stuff that is good. Thermaltake block nets me 30c idle with CNQ and 52c @ full load...stock volts. @ RMA's on one sub-$150 kit is no good. (and one CPU that foes not get overclocked often.)
'05 score with stock CPU because lower latency gets me a higher score that high fsb. CPU score is not of much importance in '05. I can get higher scores than some people with higher clocks in '05/'03 with FX 55's because of this.
Yes, there are enough lights that i do not need any other lighting in my livingroom w/ the pc on. If you saw the sound system i have hooked up, you'd understand how close you were to the truth about the rave thing you are! LoL.Quote:
Originally Posted by conrad.maranan
thanx for that clarification :) and those are indeed bad temps for a waterblock. i will stay away then from thermaltake blocks / gear. *punching myself for ot*
the rad and pump of the kit are ok...not as efficient as some others, but enough for the job. 2 120mm rads are enough to deal with heat form both the gpu and cpu, with fans at low. The koolance GPU block works really well, and i have the koolance athlon64 block as well, but have yet to install it. It should give me better temps, although this cpu was hot at the start...63c while priming @ stock w/ stock cooling. I had to send back both the cpu block (inlets cracked after 1 month @ full load), and the pump arrived broken, and i won't tell you how cheaply they make they pump...it's really a shame. But i bought the kit for looks, not for performance...it's quiet, and that's all that matters. Getting a puddle of coolant on my X800 was not very nice tho.
hope your x800(xt!) is still doin' fine then! (i once spilled sum applejuice on my mobo while running (caseless), didn't even crash :D) speaking of x800xt.. you should consider buying a better pump, those ~40 bucks would be reasonable.. (36€ get's you serious quality, silent 600l/h in germany; 'eheim')
i suppose its a 130nm a64, but still, 63c... dang, that's really hot :eek: would never do that, not even to my tbred.
the inlets of the cpu block cracked ?! sounds REAL bad, never heard of that b4..
anyway, let's get back to topic again ^^
Dale, is that rig built into the wall? I also like the frame around it!Quote:
Originally Posted by TheDude
Yes Sir...it sure is...here's what the backside in the (unheated) utility room looks like.:DQuote:
Originally Posted by LikwidKool
Nice, I like the idea :D
Merlin... OMFG, how can you move in that room...
Its intresting that you have the rear of your pc facing you... hm nice... warm air blowing at you from the PSU :D
Welcome to XS btw ;)
maybe your room is xtreme room... :lol:Quote:
Originally Posted by Merlin
And you can heat the room too, take the cold air in the unheated room, through the heatercore and you can save on your heating bills!!!
G
I love it! A lot better than just nailing a rig to the wall!Quote:
Originally Posted by TheDude
My humble room. :)
http://img82.exs.cx/img82/7423/pict00081lo.jpg
http://img82.exs.cx/img82/2466/pict00090ld.jpg
http://img82.exs.cx/img82/4004/pict00103pb.jpg
http://img229.exs.cx/img229/7359/pict00118ky.jpg
http://img229.exs.cx/img229/9459/pict0012copia6hz.jpg
http://img229.exs.cx/img229/3553/pict0013copia6oq.jpg
http://img229.exs.cx/img229/1410/pict0014copia1qw.jpg
What about 2?
http://img25.exs.cx/img25/863/pict00026ic.jpg
finaly i've got some nice shot's of my computer room.
(the computer in the antec case is from a frend)
http://users.pandora.be/matenhen/afbroom
... is this extreme enough?
[X800XL & Winchester 3000+]
http://calpack.org/Sam/7_Cardfront1.jpg
http://calpack.org/5643_05_.jpg
http://calpack.org/14272_03_.jpg
...Case Pics to Follow...
_Loyalist
Nice setup loyalist :) Hows the Zalman doing?
Zalman doing well.
Here are more Case Pics:
http://calpack.org/komp/front.jpg
decent looking, but was a pain to do:
http://calpack.org/komp/topmod.jpg
http://calpack.org/komp/silentcats.jpg
Side panel:
http://calpack.org/komp/sidepanel.jpg
CPU and GPU cooler a bit close...
http://calpack.org/komp/hyper6&x800xl.jpg
http://calpack.org/komp/side1.jpg
Loyalist, nice stuff man. :)
Something seems wrong with your 03 score though. :(
Way too high a score for those clocks... might want to get that checked out in the 3dmark forum :up:
Does anybody know what wallpaper is 9mmCensor using on his music laptop?
http://tinypic.com/1em1k4
To me it looks like Quake 3 logo.
http://www.files.tweakersonline.nl/t...er/mod/hdd.jpg
http://www.files.tweakersonline.nl/t.../mod/front.jpg
http://www.files.tweakersonline.nl/t...er/mod/psu.jpg
A Evo1800 is at the sidepanel :slobber:
http://www.files.tweakersonline.nl/t...r/mod/pomp.jpg
http://www.files.tweakersonline.nl/t.../wc_orange.jpg
http://www.files.tweakersonline.nl/t...taal_onder.jpg
http://www.files.tweakersonline.nl/t...mod/totaal.jpg
http://www.files.tweakersonline.nl/t.../drive_bay.jpg
I'll hope you like it!
Next week i'll post photo's of my peltier 226 watt setup above my mobile 2600 :p:
god damn that :banana::banana::banana::banana: is tite!
that case is sooo massive. hate the plastic front but
your psu sleeving looks pretty good. i sleeved an aspire psu once uv green but it looked like crap :ROTF:
Thanks dude!Quote:
Originally Posted by reject
Do you like the plexi hdd mod and the PSU plexi thing?
Is there anyone who know things that can be better? I need an update
:D
omg
you make my setup look like childs play
http://i140.exs.cx/img140/4061/case15hl.jpg
http://i160.exs.cx/img160/1686/sheit6ip.jpg
http://i160.exs.cx/img160/9454/close9em.jpg
2800+ newcastle w/t my 'extreme cooling' i can do 300x9 ;)
geil pc3200 2.5-3-3-7
XG vortec 500W PSU ;)
He's got about 30mhz+ over my x800XL core and pulling down a 14K score, While I never broke 13K? Is there a link to the score?Quote:
Originally Posted by isp
How extreme? Im doing my best, and im getting there. Slowly tho :(
Im having a Gin&Tonic (or six?) and tuning my new GPU Cooler. Its a 12ccm Embraco FFI 12HBK with a baker GPU evap.
I have started to collect components for a casacde, but its expensive. It takes time.
Results of the tuning:
50/50 - r404/r507 - Load from 85w TEC. I need a Fluke, cause my 20$ thermometer cant read temps below -50c. It just shows LLL.
At this point the display shows LLL
http://privat.bluezone.no/forman/div/Cooler/GPU-85w.JPG
Temp with 85w TEC
Little Update....DFI Nf4 Ultra ,Leadtek 6600Gt Extreme & new Workbench
http://img109.exs.cx/img109/897/pict06923bk.th.jpghttp://img105.exs.cx/img105/3419/pict06933rk.th.jpghttp://img105.exs.cx/img105/5663/pict06940xn.th.jpghttp://img162.exs.cx/img162/7877/pict06950vo.th.jpghttp://img162.exs.cx/img162/6296/pict06961eb.th.jpg
And now some photo of italian wb that fit on Dfi Nf4 (not with 6800 sorry :stick: )
http://img162.exs.cx/img162/9308/pict06989xc.th.jpghttp://img162.exs.cx/img162/8014/pict06992kz.th.jpghttp://img162.exs.cx/img162/8769/pict07006pc.th.jpg
Hi,
last week I finished my selfmade water cooling.
http://img8.exs.cx/img8/8396/bild0961nd.jpg
http://img8.exs.cx/img8/6725/bild0977rb.jpg
http://img8.exs.cx/img8/6193/bild0982vv.jpg
http://img155.exs.cx/img155/5094/img11057ps.jpg
http://img8.exs.cx/img8/4725/bild0880jh.jpg
Here's my PC prior to installing the 6800GT
http://www.xtremesystems.org/forums/...id=27704&stc=1
and here's after, at night, no flash --
http://www.xtremesystems.org/forums/...id=27705&stc=1
Here are my two setups...:toast:
1st Main Gaming rig
FX-55
MSI K8N Neo2
OCZ PC3200 Gold VX
OCZ DDR Booster
Audigy 2ZS
WD Raptor 74Gb
Casetek 1018
OCZ Powerstream 600watt
BenQ FP937s+
Creative Inspire T5400
* Watercooling Specs *
Swiftech MCW6002-A64
Eheim 1048
Innovatek Tank-O-Matic
Black Ice Extreme with Enermax 120mm
Tygon 1/2" Tubing
Hydrx additive
2nd My Moms Gave it to her, still mine basically :D She really likes the CCFL's :p:
XP-M @ 227x11
Abit AN7
Corsair XMS PC3200LL
GeForce2 Ti :D
<--- Pics ---> :p:
Last 2 (couldn't upload more)
:)
here is my ¨little baby¨:
http://premium1.uploadit.org/Marvin//P1010067.JPG
nice marvin :toast:
That plexi on the sidepannel is sexy!
those two pc's are beautiful! :D best wiring job i've ever seen.Quote:
Originally Posted by Tim
wow thanks man, I appreciate it :)Quote:
Originally Posted by Jester FPS
Howzit All,
I would add my rig, but it's not 'Xtreame' It gets 22K on 3dmark 01 and 6853 on 3dmark 03
R.
Come on, do you know how much I get with my P4 2.4C@3.2 with a Radeon 9600XT? 3dm01 = 12k and I dont even want to talk about the others otherwise you'ld laughQuote:
Originally Posted by Ice On Fire
Almost there... just got to get the case, psu, and HSF!
http://www.xtremesystems.org/forums/...id=28660&stc=1
nice! 2x6800U?
GTs... but with the 71.89 drivers, they might accidentally turn into ultras... lol
http://www.home.no/smy/dataromme/IMG_1008.JPG
okey 24/7 system
:lol: are those copper chunks for ram sinks? What kind of pump are you using for a TDX, GPU block, and 2 dual cores?
they DO look like solid coppers!
Yes they are ram sink made of copper :D and pump is Alphacool with Eheim 1000 (1000 litre/hour,2.0 mVS)
http://bigup.peecee.lir.dk/view.php?id=5212
http://bigup.peecee.lir.dk/view.php?id=5213
http://bigup.peecee.lir.dk/view.php?id=5216
http://bigup.peecee.lir.dk/view.php?id=5217
http://bigup.peecee.lir.dk/view.php?id=5218
http://bigup.peecee.lir.dk/view.php?id=5219
Hehe... Pasted from a old online pictures notepad doc, properly a couple of HL2 screenies :P
http://bigup.peecee.lir.dk/view.php?id=5219
- My favorit :P
yeah... got it all working... after no less than one bad mobo... that was a frustrating event... thank god I got it locally. whew...
http://www.xtremesystems.org/forums/...id=28795&stc=1
this shot was taken during the build process... I have the power connectors on the cards now... :) lol
Heres a few pics of my rig.
specs are:
amd 64 3200 at 260x10
dfi lanparty ut ultra-d
gig of pqi turbo plat. pc3200
x850xt
ocz powerstream 520
2x37 gig wd raptors (raid 0)
1x120 gig maxtor
custom danger den external h2o setup
l.i.s. blue eye lcd/fan controller
and then some other little stuff here and there.
the pics of the inside of the case are from when i had my nf3 setup in there. ive sold my digital camera since then and had to borrow a camera to take the few updated pics i have.
phase change is in the future plans.....
few more pics.....
last couple pics....
my case, waiting the flex hose to direct die.... :D
http://www.forumpcs.com.br/galeria/a...7/P1010013.JPG
http://www.forumpcs.com.br/galeria/a...7/P1010045.JPG
http://www.forumpcs.com.br/galeria/a...7/P1010077.JPG
Well here is what I was benching with last weekend. :)
http://img237.echo.cx/img237/6169/picture0028ra.th.jpg
http://img63.echo.cx/img63/630/picture0049gg.th.jpg
rofl.. solid coper ramsinks, that's awesome! They would actually still work, they would have about 5x the surface area of just the chip on its own. Must weigh the card down, though. I just have a stock AMD socketA cooler on my 9800pro and it occasionally decides to pop itself partially out of the agp slot because of the extra weight.
Actually not solid copper. They are finned OCZ ramsinks they way they are facing all you see is solid lol.Quote:
Originally Posted by gkiing
:D O.K. - here we go, X850XT is on the way and will be integrated in WC circuit.......:
http://img141.echo.cx/img141/6590/33966sa.jpg
http://img238.echo.cx/img238/5811/computer103my.jpg
http://img37.echo.cx/img37/5161/computer81gq.jpg
http://img37.echo.cx/img37/9305/computer98mk.jpg
http://img37.echo.cx/img37/6916/computer79hf.jpg
http://img37.echo.cx/img37/4786/computer65eh.jpg
http://img37.echo.cx/img37/6710/computer59wp.jpg
http://img37.echo.cx/img37/2407/computer37lu.jpg
http://img37.echo.cx/img37/9682/computer26af.jpg
http://img37.echo.cx/img37/1746/computer18kr.jpg
http://img190.echo.cx/img190/6338/a64sys0018bx.jpg
:toast:
this is what I'm benching ATM:
http://users.pandora.be/zmarre/mod/benchrigsmall.jpg
Yes, that's an Intel boxed HS on my NB and a Coolermaster Aero7 on my gfx :toast:
And a little overview:
http://users.pandora.be/zmarre/mod/workbenchsmall.jpg
It's one of the most clean moments I've ever had in my room, so keep this pic safe and precious :toast:
ahh, I've got those on my 9800proQuote:
Originally Posted by harleybro
My daily beater. And yes, my HDD's are fine with the sub there :p:
http://xtremesystems.org/forums/atta...id=29362&stc=1
i doubt the magnet has enough power.
HCC..isn't that overkill for the chipset? LMAO!
xtremesystems dude :toast:Quote:
Originally Posted by cadaveca
HCC you could run a TEC on it maybe :fact:
yeah, but does it really make it go faster? that is my question. was a serious one too!
May, may not. I know ppl who didn't gain a single MHz when changing from stock cooler to 3rd-party, but some WR needed DI on the NB... :toast:Quote:
Originally Posted by cadaveca
my not-really-xtreme main rig :p:
Fitting XP-120 (Just had to bend a cap and it *just* fits - millimeters from the 9800pro :woot: )
http://www.xtremesystems.org/forums/...id=29559&stc=1
http://www.xtremesystems.org/forums/...id=29554&stc=1
http://www.xtremesystems.org/forums/...id=29555&stc=1
UVness! (note the fan grills. i removed the "punched" stock grills and drilled holes so i could mount the fans with screws rather then the crappy antec/cheiftec plastic thing)
http://www.xtremesystems.org/forums/...id=29556&stc=1 http://www.xtremesystems.org/forums/...id=29557&stc=1
Nice and clean :toast:
TMM,
That looks sick!!! :D
Did you paint the inside of the case or did it come like that?
I think it looks better that way.
Quote:
Originally Posted by TheBurner2600
TheBurner2600,
What case is that? Are the drives standard like that or did you make that yourself. Damn I want something like that for me Opteron rig. I have a huge noise problem!
Looks like a Chieftec Dragon Maxi, or maybe an Antec clone to me.Quote:
Originally Posted by Vandi423
Drive cages are defenetly home-made :)
And theburner, plz post the pics of your pelt-setup :toast:
yep i painted the inside flat black :toast:Quote:
Originally Posted by Vandi423
Nice job! Makes me wonder..... heheQuote:
Originally Posted by TMM
got my machine more dialed in now... ditched the x-connect for a silverstone zeus 650....
http://www.xtremesystems.org/forums/...id=30262&stc=1
http://www.xtremesystems.org/forums/...id=30263&stc=1
during testing days it really looks horrible here -.-
http://www.casextreme.net/pixx/zimmer2_kl.jpg
Your case is wonderfullQuote:
Originally Posted by revenant
İ'am working my new mod,i'll show you near future
http://zivro.sitemynet.com/a/
This is my site
my cases' photos in here
Thanks! wow... your's is great also... you have a hyper 6!! NICE... I don't see too many of them... I LOVE mine... my CPU stays almost as cool as a low end water cooling setup. lol. like the CPU is 37c when the system temp is 37c! lol... it's 34c when the ambient temps are cooler.. typically it's the same or 1 degree warmer tham the system temp. :)
Like the Ferarri badge :) Very clean install. what case is that?
Yes on the hyper 6 badge is ferrari
My systems temps are idle 35, load 45
but
my cpu overclocked amd 64 3000+ 1.8@2.6
Case is CoolerMaster Stacker
http://www.peter.com.au/photos/photo...stmas-Tree.jpgQuote:
Originally Posted by revenant
:rofl:
Jagt, a little respect is too much maybe? :slapass:
Yes, of course. I was just joking around. With so many lights, there are similarities with an xmas tree. But again, I was just fooling around, no offense! :)
Then better use a wink-smiley after your rofl-smiley in the future ;)Quote:
Originally Posted by jagt
Back on-topic now! :toast:
Wahaha that ducktape is pure ownage :toast:
hello
http://cisko08.free.fr/pc/oc/ensembl...%20(Small).JPG
hmade gpu block
http://cisko08.free.fr/pc/oc/wbgpu%20(Small).JPG
A64 3400+ 1mo @ 2.7
Dfi 250gb / 1go adata pc 4500 (246 2-3-3-5)
6800 nu @ gt : caps mod / vmod
:banana:
Hi and welcome to the xtreme frenchie :toast:
Is that a form of BTX-case you're using or did you just put your case upside-down? :)
that s just a V1000
:D :toast:Quote:
Originally Posted by ZMarre
these caps are huge!!! :DQuote:
Originally Posted by Cisko
How extreme am I?
R2D2 is my copilot.
http://www.chilehardware.com/usuario...venice/rig.JPG
http://www.chilehardware.com/usuario.../venice/r2.JPG
My little Ghetto' water setup, At one point I managed to have it all in a case, but it didn't look to good. I'll repost a pic of it in the case when the BIX III arrives in 3-5 days. :D
http://img204.exs.cx/my.php?loc=img2...ture0332at.jpghttp://img204.exs.cx/my.php?loc=img2...ture0332at.jpg
Heheheh I am not very eXtreme :P
http://photobucket.com/albums/y36/re...h_PICT0054.jpg
http://photobucket.com/albums/y36/re...h_PICT0055.jpg
Its ok m8 :)
http://i7.photobucket.com/albums/y28...wOo/040040.jpg
http://i7.photobucket.com/albums/y28...wOo/040115.jpg
http://i7.photobucket.com/albums/y28...wOo/040437.jpg
The last one is my case... it spends more time getting in my way than it does housing my components... but thats why they were made right!
heres how Xtreme i am
-20c chiller :D
http://img264.echo.cx/img264/7113/dsc006070ds.th.jpg
http://img264.echo.cx/img264/8742/dsc006100mt.th.jpg
http://img264.echo.cx/img264/1980/dsc006001zu.th.jpg
http://img264.echo.cx/img264/5020/dsc005821bn.th.jpg
http://img264.echo.cx/img264/9031/dsc005685ty.th.jpg
http://img264.echo.cx/img264/6721/dsc006042ms.th.jpg
http://img264.echo.cx/img264/6721/dsc006042ms.th.jpg
this is a stock hsf on a SD 3700+...idle
http://img264.echo.cx/img264/9208/dsc006057yf.th.jpg
load
http://img264.echo.cx/img264/3184/dsc006061ji.th.jpg
i get same results at 2850mhz :clap:
whole thing cost me under $10 and took less than a week to perfect.
i have a -50c Drewmeister DD-X Ultra unit coming next week to make some incredable results. the 2850mhz shown in the screenshot was stable on water and i havent messed with the clock in this box as of yet. i just finished it last night so i havent had a chance to play yet.
am i Xtreme yet?
^whoa what is that? Can you explain what yo have going on?
I'd like to know more things about that system too! Seems pretty interesing :p:
If I'm not mistaken, he made an airsealed case, and put inside a room-aircoolingunit :)
So his case is cooled with the power for a whole room :toast:
yep thats correct ZMarre. its a 5000btu window a/c unit and i put the evaporator inside an airtight box. since its airtight you dont have to worry about condensation. the system runs at -20c as in pic but i saw -26c the other day. thats with the 200watt cpu and 100watt gpu dumping heat into the box. when i get the cpu DD and the gpu chiller i should see even better temps!
the cool thing is my ram stays really cold and i gained another 5mhz on my redline xp4000 hehe