Check the link for change log and the usual disclaimer
Printable View
Nice! Thanks Tony :toast:
More than 4.0vdimm :toast:
Nice, i'll give these a try!
Thanks Tony. Full of help as always...
So you are saying the last file can be used on my DFI NF4 UT Ultra-D board? How does this fare against the other 3/29 released bios? I can't find anything on 4/06 on DFI Street or the DFI homepage. Thanks.
^^
I just put it on my Ultra D and am doing some stability testing...
Quote:
Originally Posted by cantankerous
This bios is a modded 3/29 by Tony not dfi release
I'm loving the 3/29 bios, hopefully this can be even better.
Thanks :toast:
Can anyone confirm if the 150 divider as well as CAS 1.5 being back in this bios since it was out in 3/29? Besides the relaxed timings for easier boot does this bios really offer anything new for Ultra-D users? It seems the main changes are only for the Expert and Venus boards with the higher vdimm and chipset voltage.
sweet! :toast:
Nice one Tony! :thumbsup:
0406 bios > DFI NF4 Ultra-D ?
I'm using the 3/29 and the 150 divider now with a 144 opty. 9x multi though. Havn't checked for cas 1.5.Quote:
Originally Posted by cantankerous
Flashed to 0406. 150 divider not in bios, runs fine when set in A64tweaker though.Quote:
Originally Posted by cantankerous
I love the toe.............
well if it runs fine via a64tweaker then I don't think its a problematic limitation, I think it is just hidden in the bios. I hope it can be unhidden if another revision comes out.
Tony mentioned a long time back that Oskar actually had a bios for the NF4 boards that has CAS 1.5 fully working with actual performance increases over CAS 2 though nothing ever surfaced to the end user. I was really hoping one of these later bioses would have implemented that but I guess not. I hope CAS 1.5 can be unhidden too. My BH-6 worked very well with that.
150 divider works fine on my ultra d and opty 165
the 150 divider is only missing with the opty 146's and the x10 multiplier AFAIK
I need the 150 divider with my 3000+, so I hope you're right ;)
With me Opteron 146 divider 150 is only missing while booting with the 10x multi. If i boot with 9.5 or less i can choose 150. If i do so, change multi to 10 and safe it wil boot and run 150 fine on multi 10 (just as it does when i set it in a64tweaker). If i reboot and go back into bios its set to 166 though.
quick question for ya...
I have an Opteron 175... I was wondering if ALL the dividers are present and working with a 10x multi AND an 11x multi?
-Thanks
150 divider not there with 10x multiplier.Quote:
Originally Posted by CHaynes112
I just flashed my Venus, kicks ass bios Tony!!! I'd gained about 40mhz with Opty 148, but for some reason memory bandwidth take a very small hit even with the exact same timing I was using before, though overall stability is much better than all the previous Venus bioses, me like it! :D :D
150 divider seems to be CPU stepping dependant, some will run it and some won't, i can tell you it is in all bios files.
Cas 1.5 is there also, check the pic
http://www.xtremesystems.org/forums/...1&d=1144585324
I have a feeling CPU revision is the issue maybe, if i catch Oskar I will ask him.
Remember to read the changelog i posted, it explained what bios is for what board and that i have set 2t by default, this is to make the bios file boot friendly.
VE=Venus
EX=expert
the last bios is old skool NF4
mad props to Tony for modding a bios in 3 days and then letting us know about it