DFI NF4 None Expert Series Bios Timing F1-2GBHZ; F1-2GBHV; F1-2GBHX; F1-2GBZX

Printable View

04-04-2006, 09:21 AM
GSKILL TECH

DFI NF4 None Expert Series Bios Timing F1-2GBHZ; F1-2GBHV; F1-2GBHX; F1-2GBZX

TIMING FOR DFI ULTRA-D SLI-D; SLI-DR ONLY

F1-4000USU2-2GBHZ
2.5-2.7V; HTT=3; FSB=250
Dram Frequency Set: 200 (1:1)
Command Per Clock: Enable (1t)
Cas: 3
Trcd: 4
Tras: 8
Trp: 4~3
Trc: 7
Trfc: 13~18
Trrd: 2
Ter: 2
Twtr: 1~2
Trwt: 2~3
Tref: 3684
Twcl: 1
Dram Bank Interleave: Enable

Dqs Skew Control: Auto
Dqs Skew Value: 0
Dram Drive Strength: 7 (or Best Value For Your System)
Darm Date Drive Strength: 3 (or Best Value For Your System)
Max Async Latency: 7~8ns
Darm Response: Normal
Read Preamble Time: 5ns
Idlecycle Limit: 256
Dynamic Counter: Enable
R/w Queue Bypass:16
Bypass Max: 7
32 Byte Granularity: Disable

F1-4000BIU2-2GBHV
2.6-2.7V; HTT=3; FSB=250
Dram Frequency Set: 200 (1:1)
Command Per Clock: Enable (1t)
Cas: 3
Trcd: 3
Tras: 6
Trp: 2
Trc: 7
Trfc: 13~18
Trrd: 2
Ter: 2
Twtr: 1~2
Trwt: 2~3
Tref: 3684
Twcl: 1
Dram Bank Interleave: Enable

Dqs Skew Control: Auto
Dqs Skew Value: 0
Dram Drive Strength: 7 (or Best Value For Your System)
Darm Date Drive Strength: 3 (or Best Value For Your System)
Max Async Latency: 6~7ns
Darm Response: Normal
Read Preamble Time: 4ns
Idlecycle Limit: 256
Dynamic Counter: Enable
R/w Queue Bypass:16
Bypass Max: 7
32 Byte Granularity: Disable

F1-3200BUI2-2GBHX
2.6-2.7V; HTT=5; FSB=200
Dram Frequency Set: 200 (1:1)
Command Per Clock: Enable (1t)
Cas: 2
Trcd: 3
Tras: 6
Trp: 2
Trc: 7
Trfc: 13~18
Trrd: 2
Ter: 2
Twtr: 1~2
Trwt: 2~3
Tref: 3684
Twcl: 1
Dram Bank Interleave: Enable

Dqs Skew Control: Auto
Dqs Skew Value: 0
Dram Drive Strength: 7 (or Best Value For Your System)
Darm Date Drive Strength: 3 (or Best Value For Your System)
Max Async Latency: 5~6ns
Darm Response: Normal
Read Preamble Time: 4ns
Idlecycle Limit: 256
Dynamic Counter: Enable
R/w Queue Bypass:16
Bypass Max: 7
32 Byte Granularity: Disable

F1-3200PHU2-2GBZX
2.6-2.9V; HTT=5; FSB=200
Dram Frequency Set: 200 (1:1)
Command Per Clock: Enable (1t)
Cas: 2
Trcd: 3
Tras: 6
Trp: 2
Trc: 7
Trfc: 13~18
Trrd: 2
Ter: 2
Twtr: 1~2
Trwt: 2~3
Tref: 3684
Twcl: 1
Dram Bank Interleave: Enable

Dqs Skew Control: Auto
Dqs Skew Value: 0
Dram Drive Strength: 7 (or Best Value For Your System)
Darm Date Drive Strength: 3 (or Best Value For Your System)
Max Async Latency: 5~6ns
Darm Response: Normal
Read Preamble Time: 4ns
Idlecycle Limit: 256
Dynamic Counter: Enable
R/w Queue Bypass:16
Bypass Max: 7
32 Byte Granularity: Disable
04-25-2006, 03:02 PM
adidassler

Hi There G.S. Tech...

I would really appreciate if you can post some timing with the G.Skill 1GBFX Extreme Series mems for my DFI Expert Mobo. Pleassse.....

Thanks and Regards!
06-07-2006, 11:39 AM
hwoarang5

hi need help tuning my bios, how to optimised the ram section nicely...

here's my specs

Amd64 Opteron 165
DFI N-force 4 Ultra-D
2GB (1gb x 2 )Gkill F1-4000 PC4000
XFX GeForce 7900GT EX ED
Creative X-Fi Xtreme Music
160GB WD HDD and 80GB WD HDD

thanks in advances
06-21-2006, 10:47 PM
Punisher!

Nice! :D
07-19-2006, 10:02 AM
The Nemesis

DFI Expert

Will there be some timings for the DFI Expert, I can't even get stock out of mine:confused:
08-23-2006, 02:05 AM
GhostMaster

Can anyone post the OCs with DFI SLI-DR Venus and UCCCs?
And the settings used, thanks.
08-23-2006, 02:08 AM
GhostMaster

Quote:

Originally Posted by The Nemesis

Will there be some timings for the DFI Expert, I can't even get stock out of mine:confused:

Try DDS 3,4 or 7 and DDDS 1, the other settings are the same that ultra-d.
09-02-2006, 06:53 AM
mrbadnback

I have the Expert board too and can't find the timings. I have the F1-2GBHZ and can't find settings for the memory anywhere.
09-22-2006, 01:01 PM
Walternowi

G.S Technician,

Just want to say thanks. The settings for F1-4000USU2-2GBHZ work great for my Ultra-D.

:toast:
10-23-2006, 10:04 PM
Emperor

anyone has the settings for DFI venus and DDR400 2GBHS ?

i am seriously out of ideas. shld i be using dram settings for the rams or venus' ddr settings?
10-24-2006, 03:37 PM
GSKILL TECH

venus should use 3-1 for DDS and DDDS
rest timing is about the same
10-25-2006, 06:59 AM
Emperor

Quote:

Originally Posted by G.S Technician

venus should use 3-1 for DDS and DDDS
rest timing is about the same

same as in same settings as the 2GBHZ ?

sorry can u explain what u mean 3-1 ? i dont quite get it
10-26-2006, 01:13 PM
GSKILL TECH

Quote:

Originally Posted by Emperor

same as in same settings as the 2GBHZ ?

sorry can u explain what u mean 3-1 ? i dont quite get it

Dram Drive Strength: 3
Darm Date Drive Strength: 1
recommend for Dfi venus
10-26-2006, 02:35 PM
Emperor

Quote:

Originally Posted by G.S Technician

Dram Drive Strength: 3
Darm Date Drive Strength: 1
recommend for Dfi venus

so other timings are the same as GBHZ's ?
01-21-2007, 01:24 AM
Emperor

Quote:

Originally Posted by Emperor

so other timings are the same as GBHZ's ?

?????????????????
01-22-2007, 06:55 PM
KoHaN69

F1-4000USU2-2GBHZ is UCCC, right?
01-25-2007, 01:13 AM
Emperor

Quote:

Originally Posted by KoHaN69

F1-4000USU2-2GBHZ is UCCC, right?

yes
02-10-2007, 03:25 AM
Okda

for the ZX

Dram Data Drive Strength =

u mean level 3 ??

and Dram drive strength = 7
those numbers are not present in the 704-2bta tony bois

thanks for the very helpful thread
04-08-2007, 08:03 AM
SharkerSk

Can anyone post best timing for

F1-4000USU2-2GBHZ

I have DFI LP UT NF4 SLI-DR EXPERT :rolleyes: thanks :banana:
04-08-2007, 08:15 AM
Okda

can u change ur avatar first :P

beside the timings are listed first thing in this thread
04-09-2007, 10:07 AM
GSKILL TECH

Quote:

Originally Posted by SharkerSk

Can anyone post best timing for

F1-4000USU2-2GBHZ

I have DFI LP UT NF4 SLI-DR EXPERT :rolleyes: thanks :banana:

DFI LP UT NF4 SLI-DR EXPERT

most the timing are the same but
Dram Drive Strength and Dram Date Drive Strength you need to find out by yourself