Printable View
Hi! Im soon (tomorrow i think) getting a new 7900GT card, and I'm planing to do a 1.4v mod.
So then i ask you guys, is it something I should be carefull for? I know how to do the mod.
And this is a discussion thread for the mod too.
Btw, Im going to use a tin wire and fix it with some tape.
I made the 1.40v mod today and its fine , i use liquid conductive ink , and tape , after the mod i mesure with multimeter and i got 1.39v.
I have watercooling and my temp with MOD its 30/31c idle and 33/34c Fulll load.
Now i can get 650 mhz in the core.
The Mod its easy if you use tape , after the Mod mesure the voltage with multimeter .
regards
Ok. In the start I'm only using stockcooler, but I'll give some water to my computer in the future:P
with stokcooler you shouldnt do the MOD , even only with 1.40v MOD and stokcooler the cards get 70/80c LOAD
hmm.. not good. I'll se whats the temps are when I get the card. I just hope that I get a card that has a super-stockcooler:P
BFG GTs comming today. Plan to do the mod with Wire and solder, as I have never heard of conductive ink and do not know where to buy.
Easist mod ever :clap:
Quote:
Originally Posted by Zenjirou
The white 'dot' that you solder too the solder won't stick too btw. I tried soldering but i ended up taping the wire to the dot.
Got them. Tried the V mods using Foil and tape,.
stuck at 562mhz, which is what i had w/o the mod. using coolbits inside nvidia propeties to oc. fails after 562..
well, looks like you modded, but didnt get the volt part
got the pen and it works :)
651Core
Memory, coolbits doesn't scroll higher than 816. Need another program to increase the memory.