Zippy [3U single p3m-9950p simple stability and torture Bench
You gotta be kidding me, this power is the best power I have never seen.
Powerful and smart unit ever.After did the simple bench, I am so so impressed with it's value
and power.
Let's check the official specifications of this great PSU.
It also can be found at zippy webpage :
http://www.zippy.com.tw/P_product_detail.asp?
lv_rfnbr=1&pp_rfnbr=1312&pcp_rfnbr=18&pp_name=&pcp _name=3U%
20Single&pcpw_rfnbr=6&pp_code=P3M-9950P
[color=red]Output wattage: 950w
Best solution for : Server,Workstation,Storage System,IPC,Communication
Dimension:300.00x100.00x127.00 (mm)
11.81x3.93x5.00 (inch)
pretty long but not as wide as normal ATX power factor.
AC input spec.:
VOLTAGE: 100V ~ 240VAC (WITH ± 10% TOLERANCE)
FREQUENCY: 47Hz ~ 63Hz
INPUT CURRENT: 10A/5A AY ANY LOW/HIGH RANGE INPUT VOLTAGE
INRUSH CURRENT: 140/160A @ 110/220VAC (25℃)
POWER FACTOR CORRECTION: 95% @ 230V, FULL LOAD
DC output:
http://www.ocxtreme.org/onepagebook/...0/dcoutput.jpg
Features:
‧TEMPERATURE RANGE: OPERATING: 0℃ --- 40℃ STORAGE: -20℃ --- 80℃
‧HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
‧REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
‧HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
‧DIELECTRIC WITHSTAND: INPUT / OUTPUT 1800 VAC FOR 1 SECOND
INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND
‧ EFFICIENCY: 70% TYPICAL AT 115VAC FULL LOAD
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER POWER PROTECTION: 110% ~ 150%
‧OVEROVER VOLTAGE PROTECTION: If an over voltage fault occurs，the power supply will
latch all DC output into a shutdown state.
‧EMI NOISE FILTER: FCC CLASS B CISPR22 CLASS B
‧SAFETY: UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950
‧REMOTE ON / OFF CONTROL
THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE /
ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STANDBY),
AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE,
AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABL
************************************************** *************************
So what you think? lol..
Let's see some real monster here.
1. The power:
http://www.ocxtreme.org/onepagebook/zippy950/length.jpg
compare with pc p&c 1kw:
http://www.ocxtreme.org/onepagebook/zippy950/pczip.jpg
http://www.ocxtreme.org/onepagebook/...0/dcoutput.jpg
2. the whole thing includes molex:
4x sata; 1 24 pins atx , 12x 4 pins molex; 2 floppy molex. 1 x 8 pins atx12v and 1x 4pins
atx12v.
http://www.ocxtreme.org/onepagebook/...50/molexes.jpg
3. Backside , see the Delta? after i power it on, i guarantee no one can act like "it's ok, not
really loud." I just can't bear it at all.
http://www.ocxtreme.org/onepagebook/...0/back fan.jpg
http://www.ocxtreme.org/onepagebook/.../135adelta.jpg
so, you checked the number, you saw the pictures...wanna check how it performed?
check the classic psu bench, OCCT
each rail,
1. 3.3v
http://www.ocxtreme.org/onepagebook/zippy950/33v.gif
2. 5v
http://www.ocxtreme.org/onepagebook/zippy950/5v.gif
12v
http://www.ocxtreme.org/onepagebook/zippy950/12v.gif
cpu temp:
http://www.ocxtreme.org/onepagebook/...50/cputemp.gif
vcore:
http://www.ocxtreme.org/onepagebook/zippy950/vcore.gif
quite a good result, during the run, those voltage looks like "lock up" never change.
http://www.ocxtreme.org/onepagebook/...232dual32m.jpg
certainly, we can't omit super pi 32m..
during the run:
http://www.ocxtreme.org/onepagebook/...dr50732m01.jpg
************************************************** *************************
What can I say? you will never know its good until you really touch that.
