MB: P5WDG2-WS
Ram: Super Talent DDR2 800 1GBX2 D9 chip
CPU: P4 661
http://andre.kj.idv.tw/STT-DDR2 1000.JPG
Printable View
MB: P5WDG2-WS
Ram: Super Talent DDR2 800 1GBX2 D9 chip
CPU: P4 661
http://andre.kj.idv.tw/STT-DDR2 1000.JPG
Thats some sweet ram. Thats some low vcore for those clocks on your 661, nice. Why does your motherboard say it is AGP 2.0?
Quote:
Originally Posted by jpharg
Because I use PCI Matrox G450.
What is the voltage on the memory at this speed/timings? I need 2GB, but don't really want to give up my Mushkins...this stuff looks decent for 2GB though.
Quote:
Originally Posted by boostedevo
http://www.supertalent.com/SuperTale...?PN=T800UB1GC4
But I don't know voltage.
I meant what do you have it set for in BIOS? 2.30V? No voltage mods on the mobo for the mem then I assume? Definitely a strong 2GB kit!
Nice Supertalents, soon I will test some D9 based DDRII too. :)
How much volts?
Quote:
Originally Posted by kakaroto
i think full power 2.4V:D
I keep waiting to see if these sticks will run CAS3 at all with more volts and if so, how high. My Mushkins are D9s, but only 1GB and will run DDR1033ish with 2.45V and 4-2-3-4. If these SuperTalents are anywhere in the ballpark of that with a 2GB kit (and it looks like they could be), I am going to be hard-pressed not to pick up a set before they are gone. I am still waiting to see the new stuff Mushkin is coming out with, but these are making it difficult to wait :)
Thanks for the testing. Is this the same memory in this Driver Heaven review?
Ewiz has it for $340USD Hopefully prices will come down a bit before AMD move to DDR2. If not, I may have to wait for Conroe from Intel.
Quote:
Originally Posted by gundamit
Yes, the same memory. I bought from ewiz.
Whoops. I just read Fuggers thread on these sticks after I posted on yours. Nice sticks ... they seem a little faster than Fuggers. Maybe your mojo is stronger?Quote:
Originally Posted by AndreYang
nice...tuned to look some good DDR2
Where can I buy this RAM in Europe (Germany)?
Very nice memory, lots of potential.
I am at 394FSB + ratio
Andre is at 300FSB + ratio
My top speed ratio'd to 1100Mhz, just for screen shot but I am sure I could have benched at that.
Very nice clocks there, Andre :up:
I think FUGGER (in his original ST thread) and Andre (here) just showed us some awesome DDR2 to go after. I need to get a DDR2 testing paltform as well. Seems like fun :)
Quote:
Originally Posted by gundamit
Maybe P5WD2-E is more overclocked than WS. WS limit FSB is about 320~345. But P5WD2-E can run FSB 350+.
So I don't think WS is stronger.
Good info on the WS, I am yet to run the WS board but it should be good for the 955XE processor under cascade or LN2 with the high multis.
how much voltage on ddr2´s super talent... 2,3? to get that assume oc
Depends on the mobo, P5WD2 goes up to 2.5v
that must be the e verstion ,right? couse a normal p5wd2-p only goes to 2,3 std without mods . hope my incomming talent do as good .Quote:
Originally Posted by FUGGER
I just duplicated the same clocks and timings on these modules, thanks for the post or else I wouldn't have tried it. Mine were perfectly stable at 2.4v.
FTR, the stock voltage on those modules are 1.8v for 4-4-3 timings. They claim they are 4-3-4 modules, but it's really 4-4-3.
yah but how much voltage for 500mhz 4-4-3-4? AndreYang
Wow, AndreYang!!!
Dude, you gotta put THOSE mem on your 2.4ghz Conroe :D
Not trying to hijack the thread or anything, but I've been stressing these modules for the past few days also.
I managed 400MHz at 3-3-3 which was pretty nice:
http://techgage.com/etcetera/picture..._333_thumb.jpg
Andre, did you crack open the modules to see that they are D9's? I was told by Super Talent that they were Rev. F's, so I am just wondering if they mislead me, unless there is a Rev F D9, lol.