NV5 Silencer Revision 3 Installed on a 7900GT

Printable View

Show 100 post(s) from this thread on one page

03-12-2006, 12:34 PM
Pandora's Box

NV5 Silencer Revision 3 Installed on a 7900GT

I decided to install an NV5 Silencer Revision 3 on my 7900GT.
Stock Cooler Removed, Core and memory cleaning with isopropyl alcohol.
http://img211.imageshack.us/img211/5924/barecard0el.jpg

G71 core, nice and shiny.
http://img386.imageshack.us/img386/6011/g711dn.jpg

Silencer Installed, Notice the problem yet?
http://img211.imageshack.us/img211/6...stalled2tc.jpg

Yeap, the silencer is too long.
http://img386.imageshack.us/img386/3796/toolong1kf.jpg

Had to modify my case a little...
http://img211.imageshack.us/img211/2...iedcase7fp.jpg
http://img386.imageshack.us/img386/9...xterior9by.jpg

Temps Idle dropped from 45C to 38C. Load temps dropped from 67C to 50C while running RTHDRIBL for 5 minutes...

http://img386.imageshack.us/img386/6838/rthdribl7qz.jpg

Thats with the core at 560mhz and the memory at 1800mhz.

As far as noise goes, I cant hear my computer at all anymore. The silencer is well, silent!

Im about to go test a modified 7900GT bios that has 1.4volts applied to the core and see how I do now I have aftermarket cooling. Ive tried the bios with stock cooling and I got to 600mhz core, but I had tiny artifacts in 3dmark03.
03-12-2006, 12:54 PM
cMw

nice results thanks :]
03-12-2006, 12:56 PM
alexio

Good job man, but you could have modded the cooler instead of the case ;)

Just make sure that when you use the bios you also try it with a 20mhz delta to test if it is really better than the original one. You can also use 1.3v instead of 1.4v if you want it to run a little cooler ;)

Good luck, and have fun with your card :)
03-12-2006, 02:48 PM
jVIDIA

Nice OC men.

What's your vga brand and model ? XFX ?
03-12-2006, 02:53 PM
alexio

Quote:

Originally Posted by jVIDIA

Nice OC men.

What's your vga brand and model ? XFX ?

It's an XFX XXX edition, runs 560/1650 at stock.
03-12-2006, 02:54 PM
Pandora's Box

xfx 7900gt xxx edition. 560core, 1650mhz stock. memory is crazy on these 7900gt's. 1.4ns too!
03-12-2006, 03:13 PM
ben805

yea I would much rather hack off the cooler instead of the case :D :D with the stock bios did you gain anything after this cooler mod?
03-12-2006, 04:47 PM
IvanAndreevich

He IS running stock bios but WILL try 1.4V one.
03-12-2006, 04:50 PM
vapb400

Did it help your oc at all?

What were the temps before?
03-12-2006, 05:20 PM
m3ta1head

Cheetos!!!!!!!!!!!!!!!!!!
03-12-2006, 06:17 PM
Pandora's Box

Quote:

Originally Posted by vapb400

Did it help your oc at all?

What were the temps before?

http://www.xtremesystems.org/forums/...t=91957&page=5

basically:

stock heatsink stock volts:

44C idle, 64C Load

stock heatsink 1.4volts:

50C idle, 76C Load

NV Silencer 5 stock volts:

38C idle, 50C Load

NV Silencer 5 1.4 volts:

44C Idle, 57C Load.

at stock volts it didnt help my overclock at all. however at 1.4 volts i was able to overclock the card from my previous max of 570 to 600. (note that the 570 overclock had no delta in the bios and the 600 clock had a 20mhz delta so in effect max overclock increased to 620mhz). My memory overclock didnt change at all, max of 1.8ghz.
03-13-2006, 03:26 PM
tranceaddict

Other than being too long, does it fit well? I mean, do all the ram cooling pads align with the ram chips in the card?
03-13-2006, 03:37 PM
Chr0n1c

Pretty good numers there. Keep us posted on your progress, I will be getting 2 of these cards.
03-13-2006, 03:46 PM
tranceaddict

One more thing, what would be the best way to shorten the cooler? Using a saw?
03-13-2006, 03:49 PM
Kunaak

why didn't you just chop a inch off of the cooler itself, then chop your case to pieces?
03-13-2006, 03:53 PM
Pandora's Box

i thought about cutting off some of the coolers exhaust but i dont have anything to do that with. this is a cheap case anyway, only 40 bucks, not really worried about it to be honest.
03-13-2006, 03:56 PM
dogsx2

Quote:

Originally Posted by Kunaak

why didn't you just chop a inch off of the cooler itself, then chop your case to pieces?

I've seen a mod just about like that on a case I bought from a VIP member.;) :D
03-14-2006, 07:09 AM
toreide

Any idead how the NV5 compares to the Accelero 1?
03-14-2006, 08:18 AM
jVIDIA

Accelero X1 is a litle better in performance and more silent too.

No idea if it fits on a 7900.
03-14-2006, 08:31 AM
Pandora's Box

Quote:

Originally Posted by jVIDIA

Accelero X1 is a litle better in performance and more silent too.

No idea if it fits on a 7900.

accelero x1 is better, but it doesnt exhaust the heat outside the case.
03-14-2006, 09:24 AM
toreide

Quote:

Originally Posted by Pandora's Box

accelero x1 is better, but it doesnt exhaust the heat outside the case.

That's what I thought. I wan't as little hot air in my case is it's almost fanless.

I'm also more concerned about noise and wonder if the NV5 is better in this respect.
03-14-2006, 09:55 AM
Pandora's Box

well i cant hear the nv5 unless im like 3 inches away from it.
03-14-2006, 01:09 PM
tranceaddict

Quote:

Originally Posted by tranceaddict

Other than being too long, does it fit well? I mean, do all the ram cooling pads align with the ram chips in the card?

anyone?
03-15-2006, 04:11 PM
Daveb2012

Quote:

Originally Posted by tranceaddict

anyone?

It should cover them all with no problems.;)
03-15-2006, 04:26 PM
tranceaddict

Quote:

Originally Posted by Daveb2012

It should cover them all with no problems.;)

Thanks Dave. :)

Show 100 post(s) from this thread on one page