The A64 timings for Team Group Xtreem Line

Thought you guys are eager to know how to tweak these things:fact:
Only for Team Group Xtreem line:
let's see:

1. the best memory ever--->BH-5@ DDR500:

http://www.ocxtreme.org/onepagebook/...ibh5ddr500.jpg

2. The king of 2gb set---> Micron 5b-f

http://www.ocxtreme.org/onepagebook/...m5bfddr560.jpg

3. The little BH-5 2gb set, Aenoen :woot:

http://www.ocxtreme.org/onepagebook/...noenddr500.jpg

4. The Korea AK47:banana:

http://www.ocxtreme.org/onepagebook/...ucccddr560.jpg


Any question, let me know any time:toast:

tRFC = 11 for BH-5 first picture is possible with only the bios 1114?
Correct me if i am wrong.
Max Asynch Latency 6ns is possible up to what HTT in your tests?
My BH can do tRFC = 11 but only on Abit KN8 Ultra mobo.

Great job...that is what is needed for starting tweaking.
I vote sticky.

I'll try again with these setings...so far i have had poor results with the micron. 265 max.

Great info, thanks alot OPB.

I vote for sticky too...

u have something like that for UCCC?

well done OPB

Hey OPB :)

Neat settings, however, G.skill 1GBGH does hit 10 trfc at 250mhz+.. Or at least mine did... (11 performed best though) - But 1 trtw at 250mhz, thats just sick!!

BTW: Async always depends on divider.. :(

Dynamic Idle Cycle Counter, does it make any difference @ max stable?? - Never done on my rig :\

Quote:

---

Originally Posted by M.Beier

Hey OPB :)

Neat settings, however, G.skill 1GBGH does hit 10 trfc at 250mhz+.. Or at least mine did... (11 performed best though) - But 1 trtw at 250mhz, thats just sick!!

BTW: Async always depends on divider.. :(

Dynamic Idle Cycle Counter, does it make any difference @ max stable?? - Never done on my rig :\

---

Mine can do tRTW=1 all the way up to 272 so it is possible. :stick:

Quote:

---

Originally Posted by tHe_jOkeR

u have something like that for UCCC?

---

check '4. The Korea AK47'.

hehe, wrong button ;)
Well, around 235mhz on mine, but at 2, they hit 277mhz :D (2*512)

It is imc issue the tRTW as i was told so better luck with CPU next time.

Quote:

---

Originally Posted by high5

check '4. The Korea AK47'.

---

our reseller rated it as 3-4-4-8, thats why i ask.:stick:

UCCC for team group is definitely 3-4-4-8 for official info
but 3-4-3-8 is cable of doing that.;)

Here :stick: http://www.xtremesystems.org/forums/...t=85269&page=2

Hope can contribute to this thread.

Igb x 2 on Infineon chipset at 250mhz @ 2.5-3-2-5 at 2.6vdimm(On loose parameters,tho)

http://img296.imageshack.us/img296/7...6vdimmsup2.jpg

Nice numbers there OPB, i guess most microns clock simularly?
http://img117.imageshack.us/my.php?i...252251t9qp.jpg
Would probley get even tighter numbers on a FX and Expert mobo.

sadly i haven't been having much luck with 5b F at tighter timings. 2-2-2 barely does 200mhz, 2-3-2 tops out around 210, 225 for 2.5-3-2..
without a question, it's best to lax the timings a bit and go all out at 3-3-3 :toast:

@OPB:

got my teamgroup DDR500 sticks today.

Which BIOS would you prefer for the expert mobo and what DS/DSS would you suggest ?

thx & cu

Quote:

---

Originally Posted by Sauron_Vie

@OPB:

got my teamgroup DDR500 sticks today.

Which BIOS would you prefer for the expert mobo and what DS/DSS would you suggest ?

thx & cu

---

UCCC? BH-5? UTT? TCCD?
1GB 2x512MB? or 2x1GB? :confused:

Quote:

---

Originally Posted by Counter CS

UCCC? BH-5? UTT? TCCD?
1GB 2x512MB? or 2x1GB? :confused:

---

sorry mate, they are

team extreem 2 x 512 UTT BH5 sticks.


thx

Quote:

---

Originally Posted by Sauron_Vie

sorry mate, they are

team extreem 2 x 512 UTT BH5 sticks.


thx

---

^ bump ^

Quote:

---

Originally Posted by Onepagebook

3. The little BH-5 2gb set, Aenoen :woot:

http://www.ocxtreme.org/onepagebook/...noenddr500.jpg

---

I have a question about the drive strength. I have the Grouper, not DFI. So I have trouble to relate to these numbers. Is this weak, normal, high?

Quote:

---

DS/DDS: 6/3 (Ultra-D) or 2/3 Venus

---

level 6 is the higher half of the normal drives (2, 4, 6, 8), so try normal and high and see which works better. ;)

for the BH-5, what value in the bios does that tref correspond to?

Quote:

---

Originally Posted by madgravity34

for the BH-5, what value in the bios does that tref correspond to?

---

200mhz, 15.6us = 3120 cycles :D

Quote:

---

Originally Posted by Sauron_Vie

@OPB:

got my teamgroup DDR500 sticks today.

Which BIOS would you prefer for the expert mobo and what DS/DSS would you suggest ?

thx & cu

---

I'm just about ready to get some of these. How did they work for you with the Expert board? Which BIOS did you decide on?