The Official Team Group UCCC Standard & OC Stability Bench

Printable View

Show 100 post(s) from this thread on one page

03-02-2006, 07:08 PM
Onepagebook

The Official Team Group UCCC Standard & OC Stability Bench

Folks, time to offically introduce Team Group's another power 2GB set Xtreem series,
that is, Overclocking DDR 500MHz Dual Channel Cronus series UCCC

From the official webiste, its specifications shows as followed:

Model / Speed:PC4000 DDR500MHz
Capacity: Dual Channel Mode
CL rated: 3
Team Group part number: TXDR2048M500HC3DC

Official description:

" The Team Xtreem UCCC series is a line of high-performance memory modules bringing you advanced speed

grades, and low latencies, and especially designed for performance enthusiasts who want to challenge to

the limits of performance without worrying about data loss or corruption, mysterious intermittent

errors and display problems, or worse-the dreaded BSOD!

The modules are based on the Samsung UCCC memory IC, a new generation chip produced under

o.11 micron processing. This memory IC achieves very high frequencies (more than 500MHZ, against a

standard of 400MHZ), at a low voltage（less than 2.7V under 500MHZ operation).

In order to achieve maximum performance, the SPD of Xtreem UCCC series is specially designed under

500MHZ CL=3-4-4-8 in dual channel mode. In BIOS on motherboard, only FSB item needs to be changed from

200MHZ to 250MHZ.
The ‘Xtreem UCCC’ series ensures extreme performance without the fear of unexpected interruptions.

And, remember, each Xtreem module (as with any TeamGroup ram module) is lifetime- and satisfaction! -

guaranteed.

*Warranty Void in cases of manmade failure or natural disasters."

So, that's see the module standard and Some overclocking stabilities bench:

The Ram set:

http://www.ocxtreme.org/onepagebook/.../tgiuccc01.jpg

well I told you guys before, 0552 UCCC has somethig fun to do:D..sit tight:D

http://www.ocxtreme.org/onepagebook/.../tgiuccc02.jpg

Please note, this ram is rated @ DDR500 3-4-4-8 2.7v

Let's see what can I do:D

Testbed:

Motherboard: DFI NF4 Ultra-D, bios 1114
OS : Windows XP sp2
Video card: Asus NV 6200 TC
Cooling: PCICE Single stage -50c loaded
CPU: AMD 4600+
PSU : SilverStone 600w ST60F
HD: Western Digital 2500KS Raid 0

Let 's see the super pi mod ver.1.5
oops, looks like I set it as 3-4-3-8

1m:

http://www.ocxtreme.org/onepagebook/...ddr500pi1m.jpg

8m:

http://www.ocxtreme.org/onepagebook/...ddr500pi8m.jpg

now because i use dual core processor, so by running dual 32m, I will enclose digital camera shots
, 2 shots for ddr500. Hope that would verify my results.

1. run 1

http://www.ocxtreme.org/onepagebook/...00pi32md01.jpg

2. finished:

http://www.ocxtreme.org/onepagebook/...00pi32md02.jpg

windows captured:

http://www.ocxtreme.org/onepagebook/...dr500pi32m.jpg

************************************************** ************************************************** **

Well here you go, now, how many vdimm you assume this can be run about DDR600? ;)

check it out.:D
All the benches are non- reboot running.

1m:

http://www.ocxtreme.org/onepagebook/...ddr600pi1m.jpg

8m:

http://www.ocxtreme.org/onepagebook/...ddr600pi8m.jpg

now, let's bring it on dual 32m, now, I have 5 pics from digital camera;)
and I show everything I can.

initial run~5th:

http://www.ocxtreme.org/onepagebook/...00pi32md01.jpg

6~11

http://www.ocxtreme.org/onepagebook/...00pi32md02.jpg

12~17

http://www.ocxtreme.org/onepagebook/...00pi32md03.jpg

18~22

http://www.ocxtreme.org/onepagebook/...00pi32md04.jpg

23~finished:

http://www.ocxtreme.org/onepagebook/...00pi32md05.jpg

Windows cap:

http://www.ocxtreme.org/onepagebook/...dr600pi32m.jpg

now, some more extra...:p:

DDR620...spi 1m and cpu verify..
Take ca guess, will I break WR for 2gb set database?:D

http://www.ocxtreme.org/onepagebook/...ddr620pi1m.jpg

http://www.ocxtreme.org/onepagebook/.../ddr620cvf.jpg

Thank you for all those who love TeamGroup.

OPB
03-02-2006, 07:18 PM
sin0822

300 very sexy
03-02-2006, 07:21 PM
ozzimark

Quote:

Originally Posted by Onepagebook

DDR620...spi 1m and cpu verify..
Take ca guess, will I break WR for 2gb set database?:D

still got 31m more to go... but i think you can do it ;) just make sure you go for 312mhz, i saw some ballistix somewhere at 311mhz :D

i'm liking those 552 UCCCs :toast:
03-02-2006, 07:36 PM
Repoman

:woot: Got my set yesterday.. they both work individually at 280 at least with 2.63v (didnt try farther Mhz), but I can't get dual channel over ~273 without tons of errors in test 5. (>15000/pass). I think my mem controller is t3h suck :( Or maybe it's the mobo. Though I still haven't brought them up to the rated voltage..

Screenies to come, I have some video encoding/cpuburn to do tonight but I will test some more 32m tomorrow hopefully.

FYI, since apparently I can't run very high MHz with this CPU I've bought some of the Team 3-3-2-8 PC4000 to run lower MHz/tight timings and I will be selling this :) Not bad sticks at all but something in my setup can't handle it.
03-02-2006, 08:37 PM
HelloIDistance

Wow, Those are extremely nice 2GB sticks. UCCC at its best!
03-02-2006, 09:23 PM
linhvndiy

OPB: Please give me drive strength on utra D and expert.
Many thanks.
03-02-2006, 09:33 PM
Cpt Twitchy

Kev, I know you can find it in those sticks to get the WR and with your skills it won't take too much searching. Not thinking of shooting for a WR those are some killer sticks.

:toast: Bro
Tim
03-02-2006, 10:19 PM
bachus_anonym

Impressive clocks on that set, Kevin! :up: Let's see if there is anything more left it it!
There's more and more of those "DDR590-600 8-4-4-3.0-1T" sticks from different manufacturers, popping out everywhere and it looks like TG joined the pack...
Good Luck! :toast:
03-02-2006, 10:36 PM
Onepagebook

ok, the rule for running strength thing under DFI NF4 series board is as followed:

1. When you have phase change cooled, you wanna use higher level of strength values, i.e.

ultra-D: 7/3 (data) or 8/3
Expert:7/4, or 8/4

2. Air cooling or normal water cooling,
either 5/3 ~7/3 would work just perfectly

***********************************
decrease the strength can normally get higher fsb but it all depends on your memory controller on your CPU

how to find the proper value set?
try the strongest first, if cause unstable, decrease data strength first , then driving strength. i.e.

7/3--->7/2--->7/1---->6/3....

hope it helps.

*************************************************

Michael, looks like you're promoted huh?:D Congrats.!!
I will challenge the DDR622~625;)

OPB
03-02-2006, 10:44 PM
Dumo

Nice ram there OPB:toast: Any retail yet? I want it:)
03-02-2006, 10:45 PM
Onepagebook

Bro, it has been out for long long time...:D
03-02-2006, 11:33 PM
Dumo

Quote:

Originally Posted by Onepagebook

Bro, it has been out for long long time...:D

Really? I guess I am stuck with this Gskill GH way too long:D
I will try it....Nice ram:toast:
03-02-2006, 11:57 PM
gigi77

nice!

i submit my new tests..:)
03-03-2006, 01:17 AM
Onepagebook

Quote:

Originally Posted by Dumo

Really? I guess I am stuck with this Gskill GH way too long:D
I will try it....Nice ram:toast:

GH? Good ram;)

make sure you buy the lastest one (0552):toast:

Gigi, your results are always let me drool.:clap:
03-03-2006, 05:20 AM
kakaroto

Good to see you back Kevin. Congrats with your legend status ;) Nice TEAMGroups, need to try those ones asap in Europe.:woot:
If that is the average potention, then its really great man.

Is 552 the latest date of UCCC?
03-03-2006, 05:07 PM
Onepagebook

hey , thank you buddy.

not sure if 552 is the lastest, I thought you might know better than me though. but I am pretty sure 552 is a good date code.:)
03-03-2006, 05:23 PM
Repoman

I have some 0601 Gskill UCCC as well as the Team
03-03-2006, 05:27 PM
HelloIDistance

I believe 0602 is the latest UCCC, at least the latest I have seen.
03-03-2006, 07:23 PM
Benny Lodewijk

wow... nice job there Kev...:toast:. I want to test some UCCC from Team too :D.

Quote:

Originally Posted by onepagebook

Folks, time to offically introduce Team Group's another power 2GB set Xtreem series,
that is, Overclocking DDR 500MHz Dual Channel Cronus series UCCC

Btw are you sure this is Cronus series ? Cause i saw in Team website, Cronus using Micron -5B chip, not Samsung UCCC..
03-03-2006, 08:08 PM
Eldonko

Nice job OPB :toast:
03-03-2006, 09:39 PM
althes

wouldnt mind testing some myself
03-03-2006, 11:52 PM
gundamit

In stock at Tankguys @ $204 ...

... don't see any other place in the US right now. Link-a -dink-a-doo. Any other retailers carrying this item yet?
03-04-2006, 12:50 AM
gigi77

Quote:

Originally Posted by Onepagebook

GH? Good ram;)

make sure you buy the lastest one (0552):toast:

Gigi, your results are always let me drool.:clap:

thanks SIR ;)
03-04-2006, 01:11 AM
STickGuy

Quote:

Originally Posted by gundamit

... don't see any other place in the US right now. Link-a -dink-a-doo. Any other retailers carrying this item yet?

Thanks for posting this
03-04-2006, 02:04 AM
ZeroX

Impressive results, as always:D

Here in Europe those modules cost about 200€, not bad deal.

Other thing.. -50c loaded coldbug less X2? Not bad, I'd like to see how high that cpu can go:p:

:toast:

Show 100 post(s) from this thread on one page