Mounting Hole Dimensions For CPUs and Video cards

Right now I’m working on the mounting hardware for my next system it will have two heads one for the CPU and one for the Video card. What I want to be able to do is hookup to just about anything. So I need mounting hole dimensions for video cards and CPUs also tolerances for junk around the socket would be helpful. I like detailed drawings so whatever you guys have or know where to get it.

So far the best information I’ve found is at Intel http://www.intel.com/design/Pentium4/documentation.htm and VR-Zone http://vr-zone.com.sg/?i=1356&s=1 wondering how accurate this information is also if anything is missing. One thing I found is that I have a Nvidia 5950u and a 6600 that I measured and there both 80mm so is 53.5x53.5 quite common? Stuff like that.


A64 - 88.9mm
LGA - 72x72mm
478 - 76.2x59.44mm
ATI - 55mm
Xeon - 38.1x81.28mm
Nvidia Geforce 4/FX - 80mm, 38x38mm
Nvidia 6600/6800 - 53.5x53.5mm

Intel stuff
http://img224.imageshack.us/img224/215/lga6nc.jpg

http://img224.imageshack.us/img224/5410/4784sb.jpg

AMD
http://www.amd.com/us-en/Processors/...9_7203,00.html
http://img208.imageshack.us/img208/4055/amd2sf.jpg

AMD Socket A "@itor"
http://img185.imageshack.us/img185/1...cketamd1ca.jpg

Xeon
http://img206.imageshack.us/img206/2746/xeon6zk.jpg

Sweet. I needed some measurements for when I mod some blocks. Thanks.

Does anybody have information on video cards? I think I have processors covered.

What about for xeon CPU and M2?

tnx

Added Xeon

x1800/1900 is 53mm x 53mm.

What about Yonah and M2?

tnx

Yohah/Meron is the same mounting holes as s478
and Conroe will use the same as the s775 socket

M2 socket (I think)
http://img321.imageshack.us/img321/6782/socket19ah.jpg

The keep-out area around the mounting holes looks the same shape as the pictures of the socket so it must be the m2. Good find.

This thread has been slow going, finally a few points useful information.

Who is already sure about AM2 socket holes ?? :)

Thanks
Peter

Got a mobo sitting here (customer going AM2 route).
Will measure to confirm but looks right on glance.

PS) YUP good find. That is AM2.

Here is universal mounting 939,775,478, AM2 :toast:

http://ld-phasechange.com/images/evaps/mounting/5.jpg

tnx

You rock littledevil :)

@little devil
can you give ur measurement in .jpg?
if u dont mind,may u incl the 462 socket..thx

Thanks, it was a big help for me!

does anyone know the dimensions for north bridge for 775 and 939?

Quote:

---

Originally Posted by LittleDevil

Here is universal mounting 939,775,478, AM2 :toast:

http://phasechange.extremecooling.ne...mounting/5.jpg

tnx

---

Wheres the pic' I need the universal layout :D



jonspd

BTW , GF 8800 series has 4 holes, 58.5 x 58.5 mm :)

Thanks for this thread, I'm sure it'll be useful :)

Regards

So does anyone have a pic of the universal mounting plate?

FOR CPU : http://www.syndrome-oc.net/articles.php?article=68 But I need to update with AM2 socket ;), it can be usefull!

Somebody have mounting hole dimensions for new nv and ati cards?

Quote:

---

Originally Posted by kayl

does anyone know the dimensions for north bridge for 775 and 939?

---

I don't think that is standardized sadly :confused:

Quote:

---

Originally Posted by [XC] gomeler

I don't think that is standardized sadly :confused:

---

Unfortunately yes. But for example those who have waterblocks can measure the distances between the holes and post here. Ek has a compatibily list for their NB/SB waterblocks and if you know the dimensions for one waterblock you can see on witch boards they fit. ;)