What are some stable timings to use with this kit of memory? They don't have to be the most aggressive... just stable. I can not get this memory to run in my Abit KN8 Ultra without random restarts/BSOD's. Only trying to run the memory at 278.
Printable View
What are some stable timings to use with this kit of memory? They don't have to be the most aggressive... just stable. I can not get this memory to run in my Abit KN8 Ultra without random restarts/BSOD's. Only trying to run the memory at 278.
well could you please let me what what is bios setting option on abit mobo
from there i can help you more
No problem...
Tcl
Trc
Trfc
Tras
Trcd
Trrd
Twr
Twtr
Trtw
Command Rate
Read Preamble
Bank Interleaving
Burst Length
Drive Strength
R/W Queue Bypass Counter
Bypass Max
Idle Cycle Limit
MTRR Mapping
32bit DRAM hole
The board does not have adjustable Tref... I have been suspecting this might be the problem? A64 Tweaker detects Tref as 200MHz 3.6us when I am running the ram 1:1 @ 278.
Tcl = auto
Trc = 7~9
Trfc =13~18
Tras = 7
Trcd = 4
Trrd = 2
Twr = auto
Twtr = 1~2
Trtw = 2~3
Command Rate = 1T
Read Preamble = auto
Bank Interleaving = enable
Burst Length = auto
Drive Strength = auto
R/W Queue Bypass Counter = auto
Bypass Max = auto
Idle Cycle Limit = 256
MTRR Mapping = disable
32bit DRAM hole = auto
some of then i am not sure, i suggest you set at auto and see how is it!
Will give it a try tonight. Thanks for your help. :up:
let me know cuz i never try Abit b4
Seems to work. No problems yet. The real test starts tonight when I turn Rosetta@Home back on.
http://www.cas.uc.edu/~smithmd/gskill.JPG
I set the Idle Cycle Limit to 256 in the BIOS, but it detects as 16 in CPUZ and A64 Tweaker :shrug:
Thanks again for your help. :toast:
Looks like my system restarted 3 times during the night running Rosetta. Still have some work to do.... :(
check does other hardware holding it. looks like no memory problem
Don't know what else it could be? CPU is running at 2.5GHz as it has without problems for 9 months. HTT is down to 278 now from 313 where it was stable for 2 months that I have had this Abit.
What voltage would you suggest for 278MHz? I was running 2.7V.
i think 2.7v is good. hummQuote:
Originally Posted by shmaa
try something like 3D test...
run the Rosetta and see how long will it takes to crash