After Stop Production Samsung IC TCCD
GEIL have produced this NEW IC CODENAME: EMPEROR
Specification DDR 500 2.5/4/4/7
capable to High Perfomances to DDR400 at DDR600
Printable View
After Stop Production Samsung IC TCCD
GEIL have produced this NEW IC CODENAME: EMPEROR
Specification DDR 500 2.5/4/4/7
capable to High Perfomances to DDR400 at DDR600
Configuration
FX-57
Zalmann 9500
Dfi Nforce4 Sli-dr and Expert
2x512 GEIL ULTRA-X Series 2.5-4-4-7
6800GS By Club 3d
Bios 623/3
Settings
CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 4
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 15
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3210
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = auto
DRAM Data Drive Strength = auto
Max Async Latency = 8ns
Read Preamble Time = 5ns
Dram time = Normal
Idle Cycle Limit = 16
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)
First test Air
Spi 16mb
280Mhz 2.5-4-4-7
http://images2.pictiger.com/images/f...a0715526f5.png[/URL]
DDR500 @ 2.5-4-4-7? Is this going to be budget performance RAM or what?
290 2.5-4-4-7
http://images2.pictiger.com/images/f...2425b233fb.png
Quote:
Originally Posted by DragonOrta
Budget Ram with Best Perfomances!
360° perfomances... i'am on tests:)
300mhz :D 2.5-4-4-7 2.92v
http://images2.pictiger.com/images/4...ea7d78134a.png
:slobber:
This looks like some pretty good ram. Are those the tightest timings?
I'm testing the same modules, this is a new type of chip so not really sure how it is supposed to be tuned, this are my tccd settings.
275 2.5-4-3-7 windows memtest ok
http://img83.imageshack.us/img83/803...75tight2tk.jpg[/URL]
same sp32m ok
http://img83.imageshack.us/img83/850...htsp32m0pz.jpg[/URL]
290 2.5-4-3-7 sp8m ok
http://img90.imageshack.us/img90/70/...29025437kl.jpg[/URL]
i've seen tighter results wait for them to be posted (270 2-3-3-7)
:) Nice scores Metro!
Looks like some pretty good ram as long as the IC's being shipped are this good.
@ Gigi: Crank up that multi ;)
Quote:
Originally Posted by Coroner Kyle
Nice IC and Nice Results i think is possible attack 310Mhz with more voltages!
This ram like voltages up to 3.0v ;)
Nice results there, congrats! :toast:
Judging by your progress I think you would be able to reach 310 after fine tuning your system.
Good luck!
Nice results, but GEIL won't ever produce an IC on their own. It sure is an IC that's already available on the market, but noone realized that it was capeable of such high clocks. Then GEIL bought the ICs and rebadged them. I wouldn't call that "GEIL have produced this NEW IC CODENAME: EMPEROR". I'd rather say "GEIL labled a new IC named EMPEROR". :D
Any idea how these do at 2.5-3-3-X? even 2.5-4-3-X would be good to know as 2.5-4-4-7 isnt very fast.
Quote:
Originally Posted by Cpt Twitchy
look up a bit i got 290 2.5-4-3-7 so far i'll test more but im having temp problems (room temp around 40°C) is :banana::banana::banana::banana:ing hot right now in the middle of the summer
I don't know about CAS 2.5 but CAS 2.0 doing pretty well on my PCQuote:
Originally Posted by Cpt Twitchy
http://img466.imageshack.us/img466/624/ddr5400gg.jpg
Yeah metro taht is inanely hot.
ianocean very good looking there.
Anyone know who mfg's the ic?
Go UP 310Mhz PI 1MB.....
http://images3.pictiger.com/images/b...767bcfaabd.png
And fast 275mhz 2-3-3-7
http://img221.imageshack.us/img221/1392/emp2757cx.jpg
also available in 1GB sticks?
which IC they use...hmmm..... :rolleyes:
275Mhz Cas2.
Looking like some sweet ram.:eek:
Have the GEIL ULTRA-X PC4400 CAS 2.5-4-4-8 the same chip of PC4000 ???
Thanks
Andrea