Printable View
and i'm currently sitting at 2.275ghz in windows, 1.7v, idling around 32C
Alpha 8045 with a 40cfm fan, and around a 21C ambient temp
this chiip has a lot more to go..
and my 3dmark last i benched, was a 10747:banana:
too bad this chip isn't unlocked by my motherboard... i'm stuck at 13x multiplier...
anyone know how to unlock these?
Got mine also. 0301. I'm doing 2385 at 1.9v with an slk800 and 80mm tornado. I'm not sure if it will do it with lower volts. Just stuck it there to see how it will do :) Running some prime95 right now. Running at 35.5 so its kind of warm but will see how it does.
Can we see screen shots??? I would love to see them :slobber:
here is what i'm at right now...
i just bumped down to 166 cause the 1/5, 2/5 multipliers come in... i used 13x175 to bench..
gonna open up the doors downstairs here to the 10F winter air....:stick:
lol
i am trying to sold my 2400+ (week44 auigb) that has maxed out 2,8ghz on my 8rda+, hope my 2100+ week 50 auiHb does beter just as by you guys:p
Hey Stang,
if you want to unlock the mults for access to 12.5 and below, I highly recommend the pin trick - works very smooth!
Check out shuki's link below...
I'm running at 2275 (12.5x182) right now
1.65 vcore
kx7-333
samsung pc2700 (2x256) 2.5-2-3-1, fast cpu decode 2.85 vdimm
mem bandwidth: 2726mb
cooled w/ sk6 & 33 cfm papst, AS3 - load about 54 deg C.
Still haven't been able to break the 2300 mhz barrier, but I'm gonna do some ductwork to the cpu and see if that will help.
okra, have a look here Hopefully my xp2100 b will be here next week to pop in my kx7 :D
okra what kind of processor you use? i think its a 2400+ am I right?
i dont' know why, but i can do 160fsb before the 1/5pci divider, and all's ok, but i can't do 185 and greater.... :(
maybe i should get to the unlocking soon...
btw, here's some more screens @ 2.34ghz...:)
I just got my 2100+ (also from Newegg, along with a whole bunch of other goodies :D) yesterday evening. A week 49 AIUHB. I haven't really had a chance to overclock it yet, but it looks promising so far. BTW Stang_Man, what was your week #? I'd assume it's the same, but I'm just wondering. ;)
Loaded :
no, it's a 2100+ b core from newegg. 02/48? Aiuhb - it's the one in the pic on the egg.
Shuki :
that way seems much easier! LOL :D
thanks for the linkage bro!
AIUHB 0301Quote:
Originally posted by Greyfire
I just got my 2100+ (also from Newegg, along with a whole bunch of other goodies :D) yesterday evening. A week 49 AIUHB. I haven't really had a chance to overclock it yet, but it looks promising so far. BTW Stang_Man, what was your week #? I'd assume it's the same, but I'm just wondering. ;)
okra thats great only @1.65Vcore and not even cooled whit wc or prom/vapo
yup, it's a "poor man's" overclocker, LOL :D
i just tried to unlock by connecting the 5th L3.... and... no go..
i also tried doing the zif socket with the little piece of wire, and i couldn't get my cpu in, so i just said screw it.. i used a piece of an ATA/100 cable like SPQQY did..:(
Stang_Man,Quote:
Originally posted by Stang_Man
AIUHB 0301
What voltage at 2.34ghz?
Got the same chip tonight - will test tomorrow :)
--fibo
1.95 voltsQuote:
Originally posted by fibonaccov
Stang_Man,
What voltage at 2.34ghz?
Got the same chip tonight - will test tomorrow :)
--fibo
good luck:)
Any ideas which is better for OC, a AX 2100+ AIUHB 0248 or AX 2100+ AIUHB 0249 or maybe a later build, like 0301 or 025x ?
Wanna sell it? Tell me details!Quote:
Originally posted by full loaded
i am trying to sold my 2400+ (week44 auigb) that has maxed out 2,8ghz on my 8rda+, hope my 2100+ week 50 auiHb does beter just as by you guys:p
A fair few people have said the earlier ones are better, some have said the later ones are not as good. Then again a few have had good results with the later ones.Quote:
Originally posted by Alexandrus
Any ideas which is better for OC, a AX 2100+ AIUHB 0248 or AX 2100+ AIUHB 0249 or maybe a later build, like 0301 or 025x ?
There is in a sense a correlation between good cooling the right voltage and compatible hardware and not to say the least, good luck.
Hope this helps,
Wanna sell it? Tell me details!
sorry I saw a lot of people don`t hit high on that 2100+ so I don`t take the change anymore.
I don't want to take chances either, this is why I was asking which is better.
I have a friend that owns a computer shop and I can get whichever build date I want, but until I know I get a good OC for sure, I won't get any.
He only tried one 2100+ AIUHB 0249 and he hit 2300MHz at 1.70V easy.
But the rest of the CPUs we cannot touch unless I buy one, because it's not very fair selling used and heavily OCed CPUs to people after that, is it ?
wel why not, most of the people even don`t know wat OCing means, if he knows whitch cpu clocks good you must buy it or I thing your a bit crazy.
That's exactly it, we don't know which one OC's best so the only way would be to test them all, and he didn't agree to that. If we fry or brake any of the CPUs, it's out of his pocket, so....
Anyway, that's why I am trying to find out if there's a rule to tell which code/color OC's best.
if you only get 1.75V to the chip nothing would die en you know enough to find out witch wan hit the most.