-
Intel 65nm overclocking thread
-
-
Nice thread NiCKE ..... :clap: . Lets see some Presler/Cedar action
-
Pentium D 950 @ 4.6Ghz [1.4v VCore Bios] / Watercooling
http://www.muenster.de/~e30pics/Bild...ime-4.6Ghz.jpg
Max. Primestable 4.88Ghz with 1.475v (Bios) / Watercooling
-
-
man these are looking nice...I recently got an opteron 148 but its got the cold bug....I wanna see what these do on phase... and I may be rejoining the intel crowd soon if it does well.
GJ so far guys!
-
I must say the results i've seen so far are promising, but I have yet to see if a nice round of burn-in spanking make these 65-nm chips cry even louder. Have anyone tried with some results to show? :)
-
*cough*
Sticky ;)
*cough*
-
-
Thermalright XP120, still working on this one as its IHS has pretty shoddy contact.
http://img.photobucket.com/albums/v1...al/presspi.jpg
-
Quote:
Originally Posted by PcCI2iminal
http://img234.imageshack.us/img234/264/presler4200mhzpi32mb4fd.jpg
air cooled 930 @ 4.19ghz
being a dual core CPU you should be running two instances :)
-
very good Sentintial!,
what bios are you using on the P5WD2 btw?
Cheers
-
Quote:
Originally Posted by Byron
very good Sentintial!,
what bios are you using on the P5WD2 btw?
Cheers
Most/all of us are using the standard BIOS version 0606
-
i see, thought "fugger" said at one of his post that tried 5xx something, hence my question. Does anyone knows if older versions (except 606) bioses will work with 9x0 series?
-
How are you dudes getting these CPUs? I didn't think they were out until 1/16?
-
Quote:
Originally Posted by Byron
i see, thought "fugger" said at one of his post that tried 5xx something, hence my question. Does anyone knows if older versions (except 606) bioses will work with 9x0 series?
Its a PITA dont bother. You get a CPU warning on each boot, dont bother using anything earlier than 0606
-
Quote:
Originally Posted by rotNdude
How are you dudes getting these CPUs? I didn't think they were out until 1/16?
They got em' at newegg already!:stick:
If these things overclock and perfrom as well as they look, I think I might pick one up:D
-
Quote:
Originally Posted by Sentential
Its a PITA dont bother.
PITA = ?
excuse my illiteracy.
-
Quote:
Originally Posted by Byron
PITA = ?
excuse my illiteracy.
pain in the :slapass:
-
Quote:
Originally Posted by dinos22
being a dual core CPU you should be running two instances :)
Yeah really, it's about time people learn that. One instance of 50% load doesn't show anything. Even if it is fr benching, tell us the weaker core.
-
Bios 0519 works fine with no complaints but it seems 370FSB is common max stable bus speed with that bios. My board is known good to 450FSB with previous bios.
0606 was poor oc bios for me.
-
5050mhz with 955 XE and stock vapochill LS... (can´t go higher cause vapo ls will quit due to the excessive heat!)
4x prime95 stable!
-
Quote:
Originally Posted by tombman
5050mhz with 955 XE and stock vapochill LS... (can´t go higher cause vapo ls will quit due to the excessive heat!)
4x prime95 stable!
Very nice! Screen caps! Pics!:woot:
-
-
Quote:
Originally Posted by FUGGER
Bios 0519 works fine with no complaints but it seems 370FSB is common max stable bus speed with that bios. My board is known good to 450FSB with previous bios.
0606 was poor oc bios for me.
0422 bios doesn't work at all with 9x0 series?
