FX-60: 3DMark05@3.3G

I got a FX-60 yesterday, CCB2E 0548SPMW.
<img src="http://222.151.185.181/c-board/file/FX-60_CCB2E_0548SPMW.jpg" />

By water-cooling, 3DMark ran completely upto 3.1GHz@Vcore=1.665V,
and by LN2-cooling, it can run upto 3.3GHz and got 3DMark05: 17564 score.
http://service.futuremark.com/compare?3dm05=1682242
<img src="http://222.151.185.181/c-board/file/3DM05_17564_FX-60_3.35G.png" />
Vgpu&Vmem modded 7800GTX512(SLI)@695MHz/1.93GHz by water-cooling
using ForceWare-83.10 driver.

My FX-60 has cold-bug, so I kept temperature of copper container at arround -60 deg(C).
I need to find more suitable temperature and Vcore...these results are my first, one-night trial.

More details and screenshots are here:
http://222.151.185.181/c-board/c-boa...ne;no=4143;id=
http://222.151.185.181/c-board/c-boa...ne;no=4144;id=
...sorry in Japanese, as usual;)

wow, very nice scores, to bad about that cold bug

nice results. Cheers

where did your coldbug kick in at...how cold can you go at 260 HTT?

nice job kyosen! I'm glad to see you posting over here, maybe we can pick up a few things ;)

awful nice score. Sucks about the coldbug, though. :(

it takes ln2 for 3.3g? :(
i think i was expecting better things from this...say 3.5

Quote:

---

Originally Posted by Aphex_Tom_9

it takes ln2 for 3.3g? :(
i think i was expecting better things from this...say 3.5

---

one stepping and one run...

Very nice! :toast:

Not far from WR.
Anyway congrats man.

Nice chips there Kyosen San:toast:

Any workaround the cold bug?

That cold-bug is rubbish; only 200MHz of improvement under LN2... it suxx :(
Anyway, congrats for the work!

Cold bug or not I'm sure some of these chips would really benefit from dropping the top :cool:

Nice runs Kyosen, thanks for sharing your results :)

Nice job :)

Hmm, Japanese into 3Dmark? :) Only fought you guys did SPI / PiFast / suicideshot etc.

Quote:

---

Originally Posted by before

That cold-bug is rubbish; only 200MHz of improvement under LN2... it suxx :(
Anyway, congrats for the work!

---

the ln2 is not important here as he was only trying to maintain a temp of -60

little more then a single phase

Not to mention it's a dual core chip and that's a 500 mhz overclock on the high end part. Not bad at all!

#15

I think a single phasechange will bow ;)
My freinds vapo LS @ +8 deg C on CPU with a FX55 at 3570, and a dualcore makes even more heat I assume :S

Quote:

---

Originally Posted by M.Beier

#15

I think a single phasechange will bow ;)
My freinds vapo LS @ +8 deg C on CPU with a FX55 at 3570, and a dualcore makes even more heat I assume :S

---

a 55 claw would have to be at 1.84v to reach that 3570 so heat output would most likely be higher on the 55

Quote:

---

Originally Posted by M.Beier

Hmm, Japanese into 3Dmark? :) Only fought you guys did SPI / PiFast / suicideshot etc.

---

Return of Holicho ! :D

Regards

Andy

Quote:

---

Originally Posted by kyosen

My FX-60 has cold-bug, so I kept temperature of copper container at arround -60 deg(C).
I need to find more suitable temperature and Vcore...these results are my first, one-night trial.

---

Quote:

---

Originally Posted by bazx

the ln2 is not important here as he was only trying to maintain a temp of -60

little more then a single phase

---

@bazx
You're right; but it was because of cold-bug; so my post made sense :)

Hi Kyosen,

Try to lower FSB and raise the multiplier for higher clockspeeds. I was able to run FX-60 @ 3466 MHz when I used 17 x 204 MHz settings (Dry ice cooling).

im jealous of all your guys hardware, im curious to what the WR is for 3d05 and with what hardware any info on it. Kyosen nice job, you could always sell that FX-60 on ebay and try your luck with another.

Not bad, but not good.

Coldbug sucks.:(

Quote:

---

Originally Posted by Fixxxer

Not bad, but not good.

Coldbug sucks.:(

---

yep, its look like that all the fx60 have that :rolleyes:

Quote:

---

Originally Posted by Fixxxer

Not bad, but not good.

Coldbug sucks.:(

---

maybe its a trick of amd, so that the heavy overclockers need to buy some more cpu's untill they found one without coldbug :confused: