TEAMGROUP 2x1GB 2.3.2.5 Infineon IC

2x1GB pc3200 2-3-2-5 2.6v Infineon IC

http://img511.imageshack.us/img511/1494/inf17et.jpg

http://img363.imageshack.us/img363/5807/infoi1gp.jpg

http://img511.imageshack.us/img511/3152/inf25wg.jpg


:)

System Configuration

Fx57 (molti locked at 11x)
Dfi nf4 sli-dr bios 623-3
Sapphire X800GTO 2 no mod pipe@ 520/560
Windows Xp Sp2




Settings all Motherboards DFI for BEST PERFOMANCES with this ram

CPC = Enabled
CAS Latency(CL) = 3 (over 250mhz)
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 13
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3682
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Level 7
DRAM Data Drive Strength = 3
Max Async Latency = 7ns
Read Preamble Time = 5ns
Dram time = Fast
Idle Cycle Limit =256
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)

IC by Cpu-Z 1.31

http://img521.imageshack.us/img521/125/ic2le.png

http://img521.imageshack.us/img521/8025/2003an.png

http://img521.imageshack.us/img521/8976/2008mb8ui.png

235 2.3.2.5


http://img521.imageshack.us/img521/9503/2357aq.png

http://img521.imageshack.us/img521/3294/2358mb7in.png




250mhz 3.3.2.5


http://img389.imageshack.us/img389/3157/2503gb.png

http://img513.imageshack.us/img513/8793/2508mb3si.png

260 3.3.2.5


http://img389.imageshack.us/img389/3690/2604mt.png

http://img389.imageshack.us/img389/3581/26016mb1br.png

Memtest Pass

http://img389.imageshack.us/img389/797/260mem4hb.jpg

WORK RANGE for this kit is 2.6v ed 2.9v.
I have best perfomances at 2.8v-2.85v


3d bench have problems over 255mhz fsb, images is corrupt.

very, very nice
what's the price?

(unintentional rhyme :p:)

btw, this memory definitely has the looks, even when your remove the H/S. :)

i run spi 1mb at 268-269mhz 3.3.2.x!

no 3D action @260MHz?

btw gigi, price/availability?

For High5 all brand with this IC have problems to play 3d over 260mhz....

Is that screen corruption I'm seeing on 260-261MHz screens, Luigi? Very typical for Infineon pushed a bit too far...

Looks like we have 2GB kits popping out from everywhere :) DDR500 3D is still very nice. Now we need to know where, when and how much ;)

nice work gigi..:D
But..you should be capable for doing this;)


http://img241.imageshack.us/img241/4...r520ce69no.jpg

Quote:

---

Originally Posted by gigi77

For High5 all brand with this IC have problems to play 3d over 260mhz....

---

but i asked for 260MHz, and there are some doing 3D fine @260. is it wrong to ask? :)

and the other question which i asked twice, you didn't answer. if you don't know is it so difficult to say that you don't know? :rolleyes:

Quote:

---

Originally Posted by high5

but i asked for 260MHz, and there are some doing 3D fine @260. is it wrong to ask? :)

and the other question which i asked twice, you didn't answer. if you don't know is it so difficult to say that you don't know? :rolleyes:

---

buddy, let me go shopping and grab 6600 or gt I can show 260+ with 3d action no prob at all.;) or Bachus will kill me for sure :p:

lol
OPB, I need you to msn me ;)
I lost your info :(

Quote:

---

Originally Posted by bachus_anonym

Is that screen corruption I'm seeing on 260-261MHz screens, Luigi? Very typical for Infineon pushed a bit too far...

Looks like we have 2GB kits popping out from everywhere :) DDR500 3D is still very nice. Now we need to know where, when and how much ;)

---

anyone figure out why infineon can do max superpi 32m higher than max 3d clocks ? there's around 2-4mhz difference between the 2 maxes

Quote:

---

Originally Posted by Onepagebook

nice work gigi..:D
But..you should be capable for doing this;)


http://img241.imageshack.us/img241/4...r520ce69no.jpg

---

nice Kevin :)